Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Lenin Hills

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Наименование Article Цена
Photo Draft
Photo Hutterer & Lechner Rosette elastic, DN50 [Code number: HL 8EL/50] Draft Hutterer & Lechner Rosette elastic, DN50 [Code number: HL 8EL/50]
Hutterer & Lechner Rosette elastic, DN50 [Code number: HL 8EL/50]
Details 		HL 8EL/50 503 rub

Rosette elastic HL 8EL/50 is designed for using with HL traps. Height is 39 mm, diameter is 50 mm.

Diameter Material Weight
DN, mm   gr
50 PE 15
Photo Draft
Photo Vented bend PAM-GLOBAL® S 88˚ radial Draft Vented bend PAM-GLOBAL® S 88˚ radial
Vented bend PAM-GLOBAL® S 88˚ radial
Details
Nominal internal diameter L H W p q r Weight Code number
DN mm mm mm mm mm mm kg  
100 166 169 150 95 59 110 2,15 157581
Photo Draft
Photo (WITHDRAWN FROM SUPPLY) - REHAU RAUTITAN tool for bending the mounting rail [Code number: 11376851001 / 137 685 001] Draft (WITHDRAWN FROM SUPPLY) - REHAU RAUTITAN tool for bending the mounting rail [Code number: 11376851001 / 137 685 001]
(WITHDRAWN FROM SUPPLY) - REHAU RAUTITAN tool for bending the mounting rail [Code number: 11376851001 / 137 685 001]
Details 		11376851001

Description

Rehau RAUTITAN tool is designed specifically for bending the mounting rail 2 m which is used whn the installation of Rehau piping systems. The mounting rail is made of galvanized steel, and it allows to make the individual bracket. You can see appearance of the wall elbow in the photo.

Weight: 1,740 kg/pc.
Photo Draft
Photo Wavin PVC Pressure Pipe systems Flange, PVC-U, d - 50 [Code number: 20126034] Draft Wavin PVC Pressure Pipe systems Flange, PVC-U, d - 50 [Code number: 20126034]
Wavin PVC Pressure Pipe systems Flange, PVC-U, d - 50 [Code number: 20126034]
Details 		20126034

ATTENTION! This product is temporarily unavailable for order!

d1 d2 d3 Z N x D DN
mm mm mm mm   mm
62 110 150 16 4x18 50
Photo Draft
Photo Wavin PVC Pressure Pipe systems Flange, PVC-U, d - 110 [Code number: 20146034] Draft Wavin PVC Pressure Pipe systems Flange, PVC-U, d - 110 [Code number: 20146034]
Wavin PVC Pressure Pipe systems Flange, PVC-U, d - 110 [Code number: 20146034]
Details 		20146034

ATTENTION! This product is temporarily unavailable for order!

d1 d2 d3 Z N x D DN
mm mm mm mm   mm
133 180 220 22 8x18 110
Photo Draft
Photo Hutterer & Lechner Extension tube, DN40 [Code number: HL 10/40] Draft Hutterer & Lechner Extension tube, DN40 [Code number: HL 10/40]
Hutterer & Lechner Extension tube, DN40 [Code number: HL 10/40]
Details 		HL 10/40 1 432 rub

Extension tube HL 10/40 is made of polypropylene and has diameter of 40 mm. Extension tube is equipped with the cone nut 6/4 ".

Diameter Material Weight
DN, mm   gr
40 polypropylene 60
Photo Draft
Photo Hutterer & Lechner Wash-basin and bidet trap with cleaning eye/tray, swivelling outlet and rosette, DN40x1 1/4' [Code number: HL 135/40] Draft Hutterer & Lechner Wash-basin and bidet trap with cleaning eye/tray, swivelling outlet and rosette, DN40x1 1/4' [Code number: HL 135/40]
Hutterer & Lechner Wash-basin and bidet trap with cleaning eye/tray, swivelling outlet and rosette, DN40x1 1/4' [Code number: HL 135/40]
Details 		HL 135/40 2 184 rub

HL 135/40 wash-basin and bidet trap DN40x1 1/4' weighs 220 gr. The trap is intended for connection to a wash basin and bidet. Also HL 135/40 has cleaning eye/tray, swivelling outlet and rosette.

Diameter Material Weight
DN, mm   gr
40 polypropylene 220

Documentation

Download data sheet: Wash-basin and bidet trap HL 135/40

Download example of product installation:  Wash-basin and bidet trap HL 135/40

Photo Draft
Photo Hutterer & Lechner Appliance hose twin connector with non-return and air-admittance valve [Code number: HL 2.1] Draft Hutterer & Lechner Appliance hose twin connector with non-return and air-admittance valve [Code number: HL 2.1]
Hutterer & Lechner Appliance hose twin connector with non-return and air-admittance valve [Code number: HL 2.1]
Details 		HL 2.1 5 162 rub

HL 2.1 Appliance hose twin connector 1" х 3/4" is equipped with air-admittance valve HL 902. It is made of polypropylene. With union nut and  non-return valve.

Diameter Material Weight
inch   gr
1" х 3/4" polypropylene 65

Documentation

Download example of product installation:  Appliance hose twin connector HL 2.1

Photo Draft
Photo Vented bend PAM-GLOBAL® S 88˚ axial Draft Vented bend PAM-GLOBAL® S 88˚ axial
Vented bend PAM-GLOBAL® S 88˚ axial
Details
Nominal internal diameter L H W p q r Weight Code number
DN mm mm mm mm mm mm kg  
100 200 169 110 166 59 110 2,15 156585
Photo Draft
Photo Wavin PVC Pressure Pipe systems Flange, PVC-U, d - 63 [Code number: 20134034] Draft Wavin PVC Pressure Pipe systems Flange, PVC-U, d - 63 [Code number: 20134034]
Wavin PVC Pressure Pipe systems Flange, PVC-U, d - 63 [Code number: 20134034]
Details 		20134034

ATTENTION! This product is temporarily unavailable for order!

d1 d2 d3 Z N x D DN
mm mm mm mm   mm
78 125 165 18 4x18 63
Photo Draft
Photo Wavin PVC Pressure Pipe systems Flange, PVC-U, d - 160 [Code number: 20156034] Draft Wavin PVC Pressure Pipe systems Flange, PVC-U, d - 160 [Code number: 20156034]
Wavin PVC Pressure Pipe systems Flange, PVC-U, d - 160 [Code number: 20156034]
Details 		20156034

ATTENTION! This product is temporarily unavailable for order!

d1 d2 d3 Z N x D DN
mm mm mm mm   mm
190 240 280 28 8x22 160
Photo Draft
Photo Hutterer & Lechner Extension tube, DN50 [Code number: HL 10/50] Draft Hutterer & Lechner Extension tube, DN50 [Code number: HL 10/50]
Hutterer & Lechner Extension tube, DN50 [Code number: HL 10/50]
Details 		HL 10/50 1 432 rub

Extension tube HL 10/50 is made of polypropylene and has diameter of 50 mm. Extension tube is equipped with the cone nut 6/4 ".

Diameter Material Weight
DN, mm   gr
50 polypropylene 65
Photo Draft
Photo Hutterer & Lechner Space saver' trap, vertical, DN32x1 1/4' [Code number: HL 137.1/30] Draft Hutterer & Lechner Space saver' trap, vertical, DN32x1 1/4' [Code number: HL 137.1/30]
Hutterer & Lechner Space saver' trap, vertical, DN32x1 1/4' [Code number: HL 137.1/30]
Details 		HL 137.1/30 4 196 rub

HL 137.1/30 space saver' trap DN32 x 1 1/4' is made of polypropylene. Design of the trap allows you to save space under a sink Space saver' trap is equipped with a generously cutable tubes, cleaning eye/tray, vertical outlet.

Diameter Material Weight
DN, mm   gr
32 polypropylene 360

Documentation

Download example of product installation:  Space saver' trap HL 137.1/30

Photo Draft
Photo Hutterer & Lechner Appliance hose twin connector with non-return valve, gasket [Code number: HL 2.0] Draft Hutterer & Lechner Appliance hose twin connector with non-return valve, gasket [Code number: HL 2.0]
Hutterer & Lechner Appliance hose twin connector with non-return valve, gasket [Code number: HL 2.0]
Details 		HL 2.0 3 033 rub

HL 2.0 Appliance hose twin connector 1" х 3/4" is made of polypropylene. Connector is equipped with non-return valve, union nut and gasket.

Diameter Material Weight
inch   gr
1" х 3/4" polypropylene 80

Documentation

Download example of product installation:  Appliance hose twin connector HL 2.0

Photo Draft
Photo Wavin PVC Pressure Pipe systems Flange, PVC-U, d - 75 [Code number: 20137034] Draft Wavin PVC Pressure Pipe systems Flange, PVC-U, d - 75 [Code number: 20137034]
Wavin PVC Pressure Pipe systems Flange, PVC-U, d - 75 [Code number: 20137034]
Details 		20137034

ATTENTION! This product is temporarily unavailable for order!

d1 d2 d3 Z N x D DN
mm mm mm mm   mm
92 145 185 19 4x18 75
Photo Draft
Photo Wavin PVC Pressure Pipe systems Flange, PVC-U, d - 200 [Code number: 20160034] Draft Wavin PVC Pressure Pipe systems Flange, PVC-U, d - 200 [Code number: 20160034]
Wavin PVC Pressure Pipe systems Flange, PVC-U, d - 200 [Code number: 20160034]
Details 		20160034

ATTENTION! This product is temporarily unavailable for order!

d1 d2 d3 Z N x D DN
mm mm mm mm   mm
235 270 315 36 8x22 200
Photo
Photo Hutterer & Lechner Tee, DN40X6/4" [Code number: HL 022.1E]
Hutterer & Lechner Tee, DN40X6/4" [Code number: HL 022.1E]
Details 		HL 022.1E

Application area:

  • For kitchen traps

Characteristics:

  • Material: PP

Weight: 0,05 kg

It suitable for use with HL126.2, HL22, HL27.

 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
75 65 65 0,056 0,000316875
Photo Draft
Photo Hutterer & Lechner 90° angled elbow, DN40 [Code number: HL 11/40] Draft Hutterer & Lechner 90° angled elbow, DN40 [Code number: HL 11/40]
Hutterer & Lechner 90° angled elbow, DN40 [Code number: HL 11/40]
Details 		HL 11/40 1 432 rub

90° angled elbow HL 11/40 is made of polypropylene and is equipped with cone nut 6/4". Diameter is 40 mm.

Diameter Material Weight
DN, mm   gr
40 polypropylene 60
Photo Draft
Photo Hutterer & Lechner Space saver' trap, vertical, DN40x1 1/4' [Code number: HL 137.1/40] Draft Hutterer & Lechner Space saver' trap, vertical, DN40x1 1/4' [Code number: HL 137.1/40]
Hutterer & Lechner Space saver' trap, vertical, DN40x1 1/4' [Code number: HL 137.1/40]
Details 		HL 137.1/40 4 196 rub

HL 137.1/40 space saver' trap DN40x1 1/4' is made of polypropylene. Design of the trap allows you to save space under a sink Space saver' trap is equipped with a generously cutable tubes, cleaning eye/tray, vertical outlet.

Diameter Material Weight
DN, mm   gr
40 polypropylene 355

Documentation

Download example of product installation:  Space saver' trap HL 137.1/40

Photo Draft
Photo Hutterer & Lechner Appliance hose twin connector with non-return valve, O-ring [Code number: HL 2] Draft Hutterer & Lechner Appliance hose twin connector with non-return valve, O-ring [Code number: HL 2]
Hutterer & Lechner Appliance hose twin connector with non-return valve, O-ring [Code number: HL 2]
Details 		HL 2 3 033 rub

HL 2 Appliance hose twin connector 1" х 3/4" is equipped with non-return valve and gasket.

Diameter Material Weight
inch   gr
1" х 3/4" polypropylene 85

Documentation

Download example of product installation:  Appliance hose twin connector HL 2

© Inrusstrade.ru 1999-2026. "Inrusstrade" Ltd. Copying and quoting is prohibited