Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Lenin Hills

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Наименование Article Цена
Photo Draft
Photo Geberit HDPE Pipe connector for wall-hung WC, d90 [Code number: 366.941.16.1] Draft Geberit HDPE Pipe connector for wall-hung WC, d90 [Code number: 366.941.16.1]
Geberit HDPE Pipe connector for wall-hung WC, d90 [Code number: 366.941.16.1]
Details 		366.941.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For connecting sanitary appliances with horizontal outlet
  • For Geberit Kombifix elements for wall-hung WC

Characteristics:

  • UV-resistant
  • With seal made of EPDM

Scope of delivery:

  • Protective cap

Material: PE-HD

d d1 D L
mm mm cm cm
90 90 11.1 4
Photo Draft
Photo Hutterer & Lechner Reducer/spacer, 6/4" x 6/4" [Code number: HL 12.2] Draft Hutterer & Lechner Reducer/spacer, 6/4" x 6/4" [Code number: HL 12.2]
Hutterer & Lechner Reducer/spacer, 6/4" x 6/4" [Code number: HL 12.2]
Details 		HL 12.2 428 rub

The HL Company produces special adapters for easier installation of sewerage equipment. Plastic reducer/spacer HL 12.2 is made of polypropylene and it has thread 1 1/2' x 1 1/2.

Diameter Material Weight
inch   gr
1 1/2' x 1 1/2 polypropylene 20
Photo Draft
Photo Hutterer & Lechner Waste outlet with screw 60 mm and chain, connection thread 1 1/4' [Code number: HL 15.1] Draft Hutterer & Lechner Waste outlet with screw 60 mm and chain, connection thread 1 1/4' [Code number: HL 15.1]
Hutterer & Lechner Waste outlet with screw 60 mm and chain, connection thread 1 1/4' [Code number: HL 15.1]
Details 		HL 15.1 1 212 rub

The HL Company produces HL 15.1 waste outlet 1 1/4' with screw 60 mm and chain.

Diameter Material Weight
inch   gr
5/4" х 5/4" polypropylene 85
Photo Draft
Photo Hutterer & Lechner Appliance hose connector, gasket, 1'x3/4' [Code number: HL 19.0] Draft Hutterer & Lechner Appliance hose connector, gasket, 1'x3/4' [Code number: HL 19.0]
Hutterer & Lechner Appliance hose connector, gasket, 1'x3/4' [Code number: HL 19.0]
Details 		HL 19.0 571 rub

Appliance hose connector HL 19.0 uses for connect washing machines or dishwashers. It is made of polypropylene, weight of the product is small - only 18 grams.With gasket.

Diameter Material Weight
inch   gr
1" х 3/4" polypropylene 18
Photo Draft
Photo Hutterer & Lechner Stand pipe, 98 x 38 mm [Code number: HL 515/S] Draft Hutterer & Lechner Stand pipe, 98 x 38 mm [Code number: HL 515/S]
Hutterer & Lechner Stand pipe, 98 x 38 mm [Code number: HL 515/S]
Details 		HL 515/S 2 374 rub

HL 515/S stand pipe is used with shower trap HL 514/SN(V) and shower tray waste outlet HL 513/S. The product is made of polycarbonat. Height is 98 mm.

Height Capacity Weight
mm   gr
98 polycarbonat 42
Photo Draft
Photo Wavin PVC Pressure Pipe systems Flange, PVC-U, d - 315 [Code number: 20170034] Draft Wavin PVC Pressure Pipe systems Flange, PVC-U, d - 315 [Code number: 20170034]
Wavin PVC Pressure Pipe systems Flange, PVC-U, d - 315 [Code number: 20170034]
Details 		20170034

ATTENTION! This product is temporarily unavailable for order!

d1 d2 d3 Z N x D DN
mm mm mm mm   mm
345 400 445 36 12x22 315
Photo Draft
Photo Hutterer & Lechner Reducer/spacer, 6/4'' x 5/4'' [Code number: HL 12.3] Draft Hutterer & Lechner Reducer/spacer, 6/4'' x 5/4'' [Code number: HL 12.3]
Hutterer & Lechner Reducer/spacer, 6/4'' x 5/4'' [Code number: HL 12.3]
Details 		HL 12.3 428 rub

The HL Company produces special adapters for easier installation of sewerage equipment. Plastic reducer/spacer HL 12.3 is made of polypropylene and it has thread 1 1/2'x1 1/4'.

Diameter Material Weight
inch   gr
1 1/2'x1 1/4' polypropylene 27
Photo Draft
Photo Hutterer & Lechner Appliance hose connector, O-ring, 1'x3/4' [Code number: HL 19] Draft Hutterer & Lechner Appliance hose connector, O-ring, 1'x3/4' [Code number: HL 19]
Hutterer & Lechner Appliance hose connector, O-ring, 1'x3/4' [Code number: HL 19]
Details 		HL 19 571 rub

Appliance hose connector HL 19 uses for connect washing machines or dishwashers. It is equipped with O-ring and plug.

Diameter Material Weight
inch   gr
1" х 3/4" polypropylene 18
Photo Draft
Photo Hutterer & Lechner Tee with HL19, DN32x1 1/4' [Code number: HL 19T/30] Draft Hutterer & Lechner Tee with HL19, DN32x1 1/4' [Code number: HL 19T/30]
Hutterer & Lechner Tee with HL19, DN32x1 1/4' [Code number: HL 19T/30]
Details 		HL 19T/30 2 374 rub

The HL Company produces HL19T.2/40 tee DN32 x 1 1/4' with appliance hose connector 3/4' HL19 for washing machine and dishwasher. It is characterized by the availability of two flare nuts

Diameter Material Weight
DN, mm   gr
32 polypropylene 63
Photo Draft
Photo Hutterer & Lechner Stand pipe, 105 x 80 mm [Code number: HL 517] Draft Hutterer & Lechner Stand pipe, 105 x 80 mm [Code number: HL 517]
Hutterer & Lechner Stand pipe, 105 x 80 mm [Code number: HL 517]
Details 		HL 517 2 596 rub

HL 517 stand pipe is used with shower trap HL 522(V). The product is made of polycarbonat. Height is 105 mm.

Height Capacity Weight
mm   gr
105 polycarbonat 87
Photo Draft
Photo [NO LONGER PRODUCED] - Geberit HDPE Pipe connector for wall-hung WC, d110 [Code number: 367.941.16.1] Draft [NO LONGER PRODUCED] - Geberit HDPE Pipe connector for wall-hung WC, d110 [Code number: 367.941.16.1]
[NO LONGER PRODUCED] - Geberit HDPE Pipe connector for wall-hung WC, d110 [Code number: 367.941.16.1]
Details 		367.941.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For connecting sanitary appliances with horizontal outlet
  • For Geberit Kombifix elements for wall-hung WC

Characteristics:

  • UV-resistant
  • With seal made of EPDM

Scope of delivery:

  • Protective cap

Material: PE-HD

d d1 D L
mm mm cm cm
110 90 11.1 4
Photo Draft
Photo Geberit HDPE Rubber collar for traps, d 32 x 44 [Code number: 152.682.00.1] Draft Geberit HDPE Rubber collar for traps, d 32 x 44 [Code number: 152.682.00.1]
Geberit HDPE Rubber collar for traps, d 32 x 44 [Code number: 152.682.00.1]
Details 		152.682.00.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For bidets and washbasins

Material: EPDM

d di
mm mm
32 44
Photo Draft
Photo Wavin PVC Pressure Pipe systems Adapter compression joint with threaded G 1-1/2", d 1-1/2x1" [Code number: 20120056] Draft Wavin PVC Pressure Pipe systems Adapter compression joint with threaded G 1-1/2", d 1-1/2x1" [Code number: 20120056]
Wavin PVC Pressure Pipe systems Adapter compression joint with threaded G 1-1/2", d 1-1/2x1" [Code number: 20120056]
Details 		20120056

ATTENTION! This product is temporarily unavailable for order!

Rc/R L1 M
  mm kg
1-1/2" х 1" 48 0,5
Photo Draft
Photo Wavin PVC Pressure Pipe systems Flange, PVC-U, d - 355 [Code number: 20174034] Draft Wavin PVC Pressure Pipe systems Flange, PVC-U, d - 355 [Code number: 20174034]
Wavin PVC Pressure Pipe systems Flange, PVC-U, d - 355 [Code number: 20174034]
Details 		20174034

ATTENTION! This product is temporarily unavailable for order!

d1 d2 d3 Z N x D DN
mm mm mm mm   mm
388 460 505 38 16x22 355
Photo Draft
Photo Geberit HDPE weld-neck collar, d50 [Code number: 361.744.16.1] Draft Geberit HDPE weld-neck collar, d50 [Code number: 361.744.16.1]
Geberit HDPE weld-neck collar, d50 [Code number: 361.744.16.1]
Details 		361.744.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For all drainage pipes

Material: HDPE

d D D1 H h h1
mm mm cm cm cm cm
50 8 5,4 6 4,2 0,8
Photo Draft
Photo Hutterer & Lechner Reducer/spacer, 2" x 6/4" [Code number: HL 12.4] Draft Hutterer & Lechner Reducer/spacer, 2" x 6/4" [Code number: HL 12.4]
Hutterer & Lechner Reducer/spacer, 2" x 6/4" [Code number: HL 12.4]
Details 		HL 12.4 428 rub

The HL Company produces special adapters for easier installation of sewerage equipment. Plastic reducer/spacer HL 12.4 is made of polypropylene and it has thread 2' x 1 1/2'.

Diameter Material Weight
inch   gr
2' x 1 1/2' polypropylene 20
Photo Draft
Photo Hutterer & Lechner Elbow adapter, 1 1/2'x3/4' [Code number: HL 18] Draft Hutterer & Lechner Elbow adapter, 1 1/2'x3/4' [Code number: HL 18]
Hutterer & Lechner Elbow adapter, 1 1/2'x3/4' [Code number: HL 18]
Details 		HL 18 1 783 rub

Elbow adapter HL 18 uses for connect washing machines or dishwashers. Diameter of elbow adapter is 6/4 "x 3/4", it is made of polypropylene. Elbow adapter is equipped with a flat gasket and union nut.

Diameter Material Weight
    gr
6/4" х 40 х 3/4" polypropylene 35
Photo Draft
Photo Hutterer & Lechner Tee with HL19, DN40x1 1/2' [Code number: HL 19T/40] Draft Hutterer & Lechner Tee with HL19, DN40x1 1/2' [Code number: HL 19T/40]
Hutterer & Lechner Tee with HL19, DN40x1 1/2' [Code number: HL 19T/40]
Details 		HL 19T/40 2 374 rub

The HL Company produces HL 19T/40 tee DN40 x 1 1/2' with appliance hose connector 3/4' HL19 for washing machine and dishwasher. It is characterized by the availability of two flare nuts

Diameter Material Weight
DN, mm   gr
40 polypropylene 65
Photo Draft
Photo Hutterer & Lechner Shower tray waste outlet DN40 with coverplate d 86mm, vertical [Code number: HL 513/S] Draft Hutterer & Lechner Shower tray waste outlet DN40 with coverplate d 86mm, vertical [Code number: HL 513/S]
Hutterer & Lechner Shower tray waste outlet DN40 with coverplate d 86mm, vertical [Code number: HL 513/S]
Details 		HL 513/S 3 722 rub

HL 513/S - it is shower tray waste outlet DN40 vertical. Waste outlet has stainless steel coverplate d 86 mm. It is made of polypropylene. Capacity of shower tray waste outlet is 0,75 l/s.

Diameter Capacity Material Weight
DN, mm l/s   gr
40 0,75 polypropylene 420
Photo Draft
Photo Geberit HDPE Rubber collar for traps, d 32 x 57 [Code number: 152.691.00.1] Draft Geberit HDPE Rubber collar for traps, d 32 x 57 [Code number: 152.691.00.1]
Geberit HDPE Rubber collar for traps, d 32 x 57 [Code number: 152.691.00.1]
Details 		152.691.00.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For bidets and washbasins

Material: EPDM

d di
mm mm
32 57
© Inrusstrade.ru 1999-2025. "Inrusstrade" Ltd. Copying and quoting is prohibited