Logo
Ru| En
Loading

Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Name Article Price
Bracket for supporting tube with vulcanized rubber ring PAM-GLOBAL® Plus
Details
Nominal internal diameter D1 D2 A B C Weight Code number
DN           kg  
100 214 162 259 32 32 1,6 179219
125 228 187 275 32 32 1,7 179220
150 255 222 300 32 32 2,6 179221
200 310 278 362 36 36 2,3 179222

Dimensions are presented in mm

Usage example

PAM-GLOBAL® S Stack support pipe
Details
Nominal internal diameter L a b c d e Ø ext Weight Code number
DN mm mm mm mm mm mm mm kg  
50 220 150 195 30 17 8 108 2,1 156413
70 200 170 215 30 19 8 128 2,0 177742
75 220 175 218 30 19 8 133 3,0 156512
100 220 214 259 32 205 8 162 4,5 156657
125 220 228 275 32 20 8 187 5,5 156793
150 220 255 300 32 22 8 222 7,2 156904
200 220 310 362 36 22 8 278 10,0 157014
250 300 394 444 40 25 8 354 18,5 157097
300 300 448 498 40 30 8 406 30,75 157160
400 340 550 600 50 30 10 508 43,9 248776

Dimensions are presented in mm 

Usage example

Eccentric reducer PAM-GLOBAL® Plus
Details
Nominal internal diameter A L t1 t2 Weight Code number
DN         kg  
80х50 13 80 35 30 0,7 176747
100x50 25 80 40 30 0,8 155209
100x80 14 90 40 35 0,95 176748
125x50 38,5 85 45 30 1,5 155210
125x80 26 95 45 35 1,3 176749
125x100 12,5 95 45 40 1,6 155250
150x50 51 95 50 30 1,9 155211
150x80 39 100 80 35 2,0 176750
150x100 25 105 50 40 19,95 155251
150x125 12,5 110 50 45 2,0 155269
200x75 64 115 43 72 3,8 155340
200x100 50 115 60 40 3,6 155252
200x125 37,5 120 60 45 3,8 155270
200x150 25 125 60 50 3,4 155284
250x75 96 125 43 82 6,7 155341
250x100 82 125 43 82 6 155377
250x150 57 135 50 82 6,3 155437
250x200 32 145 60 80 6,9 155465
300x100 108 140 45 95 9,4 155373
300x150 83 150 50 97 11 155438
300x200 58 160 60 95 10,2 155466
300x250 26 170 70 95 10,7 155487
400x300 52 200 100 100 19,6 155504

Dimensions are presented in mm

Suppoting tube PAM-GLOBAL® Plus
Details
Nominal internal diameter D Weight Code number
DN mm kg  
100 145 2,3 155230
125 170 3,0 155256
150 195 4,0 155272
200 245 5,9 155286

Usage example

REHAU RAUPIANO PLUS T-piece 45°, d - 110-90 [Code number: 11002571001 / 100 257 001]
Details
11002571001 1 854 rub

Rehau RAUPIANO PLUS T-piece is used for connection two branches of pipeline into one stream at inclination angle of 45°. The T-piece is painted in white colour. It is made of polypropylene which is improved with mineral supplements.

The main advantages of the RAUPIANO PLUS T-piece:

  • High strength;
  • UV-resistance;
  • Durability;
  • Resistance to aggressive environments and high temperatures (RAUPIANO PLUS sewerage system is suitable for derivation of wastewater with temperatures up to +90 °C);
  • Simple and easy installation;
  • Resistance to corrosion.

It is designed for connection pipes with diameters of 110 and 90 mm.

Dy α z1 z2 z3 Weight
mm   mm mm mm kg/pc
110/90 45° 12 121 118 0,528
REHAU RAUPIANO PLUS T-piece 87°, d - 110-90 [Code number: 11002581001 / 100 258 001]
Details
11002581001 1 854 rub

Rehau RAUPIANO PLUS T-piece is used for connection two branches of pipeline into one stream at inclination angle of 87°. The T-piece is painted in white colour. It is made of polypropylene which is improved with mineral supplements.

The main advantages of the RAUPIANO PLUS T-piece:

  • High strength;
  • UV-resistance;
  • Durability;
  • Resistance to aggressive environments and high temperatures (RAUPIANO PLUS sewerage system is suitable for derivation of wastewater with temperatures up to +90 °C);
  • Simple and easy installation;
  • Resistance to corrosion.

It is designed for connection pipes with diameters of 110 and 90 mm.

Dy α z1 z2 z3 Weight
mm   mm mm mm kg/pc
110/90 87° 68 79 48 0,498
REHAU RAUPIANO PLUS bend 87° long, d - 110 [Code number: 11002591001 / 100 259 001]
Details
11002591001 1 266 rub

Rehau RAUPIANO PLUS bend is made of polypropylene and is equipped with rubber gasket.

Diameter of the bend is 110 mm. It is used to change the direction of the pipeline at 87,5°.

The bend is resistant to ultraviolet light and aggressive environments. It is durable and long-term. It is painted in sanitary white colour.

Dy α z1 z2 Weight
mm   mm mm kg/pc
110 87,5° 84 76 0,586
(NO LONGER PRODUCED) - REHAU RAUPIANO PLUS parallel branch fitting 87°, d - 90-90-50-90 [Code number: 11009281001 / 100 928 001]
Details
11009281001
Attention! The article is discontinued!

Rehau RAUPIANO PLUS parallel branch fitting is equipped with O-rings. The branch fitting has two parallel outlet, it is suitable for connection of pipes with diameters of 90 and 50 mm. The pipe branches are connected at an angle of 87°.

The branch fitting is painted in white, it is made of modified polypropylene RAU-PP.

Dy α z1 z2 z3 Weight
mm   mm mm mm kg/pc
90/90/50/90 87° 62 21 150 0,458
REHAU RAUPIANO PLUS Parallel branch fitting 87°, d - 90-90-50-90 [Code number: 11009281002 / 100 928 002]
Details
11009281002 5 562 rub

Application:

  • For sewer systems
  • For polymer pipes

Material: polypropylene RAU-PP (reinforced with minerals).

Colour: RAL 9003 white.

The fitting is equipped with rubber seals.

It has a hydraulically optimized radius.

DN α z1 z2 z3 z4 z5 Weight
mm mm mm mm mm mm mm kg/pc
90/90/50 87 28 88 51 70 50 0,465
REHAU RAUPIANO PLUS parallel branch fitting 87°, d - 110-110-50-110 [Code number: 11009291001 / 100 929 001]
Details
11009291001
Attention! The article is discontinued and replaced by: 11009291002!

Rehau RAUPIANO PLUS parallel branch fitting is equipped with O-rings. The branch fitting has two parallel outlet, it is suitable for connection of pipes with diameters of 110 and 50 mm. The pipe branches are connected at an angle of 87°.

The branch fitting is painted in white, it is made of modified polypropylene RAU-PP.

Dy α z1 z2 z3 Weight
mm   mm mm mm kg/pc
110/110/50/110 87° 85 21 190 0,760
REHAU RAUPIANO PLUS Parallel branch fitting 87°, d - 110-110-50-110 [Code number: 11009291002 / 100 929 002]
Details
11009291002 5 794 rub

Application:

  • For sewer systems
  • For polymer pipes

Material: polypropylene RAU-PP (reinforced with minerals).

Colour: RAL 9003 white.

The fitting is equipped with rubber seals.

It has a hydraulically optimized radius.

DN α z1 z2 z3 z4 z5 Weight
mm mm mm mm mm mm mm kg/pc
110/110/50 87 28 105 58 78 60 0,760
Ostendorf HT Bend 15° HTB, PP-H, d - 32 [Code number: 110100]
Details
110100 62 rub

Application purpose:

  • For drainage systems
  • For rainwater systems
  • For ventilation systems

Colour: gray

Material: Polypropylene (PP-H).

Material: Polypropylene (PP-H).

d α Z1 Z2 l1
mm mm mm mm mm
32 15° 3 8 42

Download the installation instructions of product: 110100 HT bend

Chemical resistance of: Chemical resistance HT system

Ostendorf HT Bend 30° HTB, PP-H, d - 32 [Code number: 110110]
Details
110110 68 rub

Application purpose:

  • For drainage systems
  • For rainwater systems
  • For ventilation systems

Colour: gray

Material: Polypropylene (PP-H).

Material: Polypropylene (PP-H).

d α Z1 Z2 l1
mm mm mm mm mm
32 30° 6 10 42

Download the installation instructions of product: 110110 HT bend

Chemical resistance of: Chemical resistance HT system

Ostendorf HT Bend 45° HTB, PP-H, d - 32 [Code number: 110120]
Details
110120 74 rub

Application purpose:

  • For drainage systems
  • For rainwater systems
  • For ventilation systems

Colour: gray

Material: Polypropylene (PP-H).

d α Z1 Z2 l1
mm mm mm mm mm
32 45° 9 12 42

Download the installation instructions of product: 110120 HT bend

Chemical resistance of: Chemical resistance HT system

Ostendorf HT Bend 67° HTB, PP-H, d - 32 [Code number: 110130 (O)]
Details
110130 (O) 74 rub

Application purpose:

  • For drainage systems
  • For rainwater systems
  • For ventilation systems

Colour: gray

Material: Polypropylene (PP-H).

d α Z1 Z2 l1
mm mm mm mm mm
32 67° 14 17 42

Download the installation instructions of product: 110130 HT bend

Chemical resistance of: Chemical resistance HT system

Ostendorf HT Bend 87° HTB, PP-H, d - 32 [Code number: 110140]
Details
110140 74 rub

Application purpose:

  • For drainage systems
  • For rainwater systems
  • For ventilation systems

Colour: gray

Material: Polypropylene (PP-H).

d α Z1 Z2 l1
mm mm mm mm mm
32 87° 19 23 42

Download the installation instructions of product: 110140 HT bend

Chemical resistance of: Chemical resistance HT system

Ostendorf HT T-piece 45° HTEA, PP-H, d - 32/32 [Code number: 110200]
Details
110200 124 rub

Application purpose:

  • For drainage systems
  • For rainwater systems
  • For ventilation systems

Colour: gray

Material: Polypropylene (PP-H).

d α Z1 Z2 Z3 L
mm mm mm mm mm mm
32/32 45° 9 40 40 95

Download the installation instructions of product: 110200 HT T-piece 45°

Chemical resistance of: Chemical resistance HT system

(NO LONGER PRODUCED) - REHAU RAUPIANO PLUS double branch fitting, right, d - 110-110-75 [Code number: 11026771001 / 102 677 001]
Details
11026771001
Attention! The article is discontinued!

Rehau RAUPIANO PLUS double branch fitting (right) is hydraulically optimized. It is equipped with O-rings.

The double branch fitting combines the three pipeline branches with diameters of 110 and 75 mm into one pipeline.

Material: RAU-PP - polypropylene reinforced with mineral additives.

Colour: white.

Dy α z1 z2 z3 z4 z5 Weight
mm   mm mm mm mm mm kg/pc
110/110/75 87° 40 148 58 78 60 0,760
REHAU RAUPIANO PLUS Double branch fitting, right, d - 110-110-75 [Code number: 11026771002 / 102 677 002]
Details
11026771002 5 886 rub

Application:

  • For sewer systems
  • For polymer pipes

Material: polypropylene RAU-PP (reinforced with minerals).

Colour: RAL 9003 white.

The fitting is equipped with rubber seals.

The lower branch is turned to the right side

DN α z1 z2 z3 z4 z5 Weight
mm mm mm mm mm mm mm kg/pc
110/110/75 87 40 148 58 78 60 0,760
(NO LONGER PRODUCED) - REHAU RAUPIANO PLUS double branch fitting, left, d - 110-110-75 [Code number: 11026781001 / 102 678 001]
Details
11026781001
Attention! The article is discontinued!

Rehau RAUPIANO PLUS double branch fitting (left) is hydraulically optimized. It is equipped with O-rings.

The double branch fitting combines the three pipeline branches with diameters of 110mm and 75mm into one pipeline.

Material: RAU-PP - polypropylene reinforced with mineral additives.

Colour: white.

Dy α z1 z2 z3 z4 z5 Weight
mm   mm mm mm mm mm kg/pc
110/110/75 87° 40 148 58 78 60 0,760