Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Lenin Hills

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Наименование Article Цена
Photo Draft
Photo Ostendorf HT Connection piece to metal pipe HTS (without lip seal), PP-H, d - 40/40 [Code number: 111900] Draft Ostendorf HT Connection piece to metal pipe HTS (without lip seal), PP-H, d - 40/40 [Code number: 111900]
Ostendorf HT Connection piece to metal pipe HTS (without lip seal), PP-H, d - 40/40 [Code number: 111900]
Details 		111900 95 rub

Application purpose:

  • For drainage systems
  • For rainwater systems
  • For ventilation systems

Colour: gray

Material: Polypropylene (PP-H).

DN d l L
mm mm mm mm
40/40 50 80 46

Download the installation instructions of product: HT Connection piece

Chemical resistance of: HT system
Photo Draft
Photo Ostendorf HT Angled siphon connection piece to metal and plastic HTSW, PP-H, d - 40/30 [Code number: 111910] Draft Ostendorf HT Angled siphon connection piece to metal and plastic HTSW, PP-H, d - 40/30 [Code number: 111910]
Ostendorf HT Angled siphon connection piece to metal and plastic HTSW, PP-H, d - 40/30 [Code number: 111910]
Details 		111910 88 rub

Application purpose:

  • For drainage systems
  • For rainwater systems
  • For ventilation systems

Colour: gray

Material: Polypropylene (PP-H).

DN d1 z1 z2 L1
mm mm mm mm mm
40/30 40 24,5 22 75

Download the installation instructions of product: HT Angled siphon connection piece

Chemical resistance of: HT system
Photo Draft
Photo Ostendorf HT Angled siphon connection piece to metal and plastic HTSW, PP-H, d - 40/40 [Code number: 111920] Draft Ostendorf HT Angled siphon connection piece to metal and plastic HTSW, PP-H, d - 40/40 [Code number: 111920]
Ostendorf HT Angled siphon connection piece to metal and plastic HTSW, PP-H, d - 40/40 [Code number: 111920]
Details 		111920 104 rub

Application purpose:

  • For drainage systems
  • For rainwater systems
  • For ventilation systems

Colour: gray

Material: Polypropylene (PP-H).

DN d1 z1 z2 L1
mm mm mm mm mm
40/40 50 25 26 75,5

Download the installation instructions of product: HT Angled siphon connection piece

Chemical resistance of: HT system
Photo Draft
Photo (DISCONTINUED FROM PRODUCTION) - REHAU RAUPIANO PLUS Adapter for pumping unit, d - 90 [Code number: 11200651001 / 120 065 001] Draft (DISCONTINUED FROM PRODUCTION) - REHAU RAUPIANO PLUS Adapter for pumping unit, d - 90 [Code number: 11200651001 / 120 065 001]
(DISCONTINUED FROM PRODUCTION) - REHAU RAUPIANO PLUS Adapter for pumping unit, d - 90 [Code number: 11200651001 / 120 065 001]
Details 		11200651001

Application:

  • For sewer systems
  • For polymer pipes

Material: polypropylene RAU-PP (reinforced with minerals).

Colour: RAL 9003 white.

de BL Weight
mm mm kg/pc
DN 90 250 0,404
Photo Draft
Photo (DISCONTINUED FROM PRODUCTION) - REHAU RAUPIANO PLUS Adapter for pumping unit, d - 110 [Code number: 11200661001 / 120 066 001] Draft (DISCONTINUED FROM PRODUCTION) - REHAU RAUPIANO PLUS Adapter for pumping unit, d - 110 [Code number: 11200661001 / 120 066 001]
(DISCONTINUED FROM PRODUCTION) - REHAU RAUPIANO PLUS Adapter for pumping unit, d - 110 [Code number: 11200661001 / 120 066 001]
Details 		11200661001

Application:

  • For sewer systems
  • For polymer pipes

Material: polypropylene RAU-PP (reinforced with minerals).

Colour: RAL 9003 white.

de BL Weight
mm mm kg/pc
DN 110 250 0,546
Photo Draft
Photo REHAU RAUPIANO PLUS Reducer, short, d - 110-90 [Code number: 11200871001 / 120 087 001] Draft REHAU RAUPIANO PLUS Reducer, short, d - 110-90 [Code number: 11200871001 / 120 087 001]
REHAU RAUPIANO PLUS Reducer, short, d - 110-90 [Code number: 11200871001 / 120 087 001]
Details 		11200871001 342 rub

Application:

  • For sewer systems
  • For polymer pipes

Material: polypropylene RAU-PP (reinforced with minerals).

Colour: RAL 9003 white.

The fitting is equipped with rubber seals.

Dy z1 Weight
mm mm kg/pc
110/90 -26 0,223
Photo Draft
Photo (NO LONGER PRODUCED) - REHAU RAUPIANO PLUS parallel bend, d - 110-110 [Code number: 11205641002 / 120 564 002] Draft (NO LONGER PRODUCED) - REHAU RAUPIANO PLUS parallel bend, d - 110-110 [Code number: 11205641002 / 120 564 002]
(NO LONGER PRODUCED) - REHAU RAUPIANO PLUS parallel bend, d - 110-110 [Code number: 11205641002 / 120 564 002]
Details 		11205641002
Attention! The article is discontinued!

Rehau RAUPIANO PLUS parallel bend is painted in white colour and is made of modified polypropylene. The bend has improved sound absorption characteristics, it is strong and durable, resistant to aggressive media and ultraviolet radiation.

The bend is connected to pipes with diameter of 110 mm.

Dy z1 z2 z3 z4 Weight
mm mm mm mm mm kg/pc
110/110 25 134 149 118 1,042
Photo Draft
Photo REHAU RAUPIANO PLUS access pipe, d - 125 [Code number: 11206341001 / 120 634 001] Draft REHAU RAUPIANO PLUS access pipe, d - 125 [Code number: 11206341001 / 120 634 001]
REHAU RAUPIANO PLUS access pipe, d - 125 [Code number: 11206341001 / 120 634 001]
Details 		11206341001 1 961 rub

Rehau RAUPIANO PLUS access pipe provides quick access to the required section of the pipeline. The access pipe with diameter of 125 mm provides quick inspection the pipeline section and clean it if necessary. Cover of the access pipe is round.

The access pipe is resistant to aggressive environments and high temperatures - drainage system RAUPIANO PLUS is used for derivation waste water with temperatures up to +90 °C. Installation is simple and convenient.

Screw cover is tightened after installing the access pipe.

Dy z1 z3 Weight
mm mm mm gr/pc
125 70 73 816
Photo Draft
Photo Ostendorf HT Bend 15° HTB, PP-H, d - 50 [Code number: 112100] Draft Ostendorf HT Bend 15° HTB, PP-H, d - 50 [Code number: 112100]
Ostendorf HT Bend 15° HTB, PP-H, d - 50 [Code number: 112100]
Details 		112100 56 rub

Application purpose:

  • For drainage systems
  • For rainwater systems
  • For ventilation systems

Colour: gray

Material: Polypropylene (PP-H).

d α Z1 Z2 l1
mm mm mm mm mm
50 15° 5 9 46

Download the installation instructions of product: HT bend

Chemical resistance of: HT system
Photo Draft
Photo REHAU RAUPIANO PLUS access pipe, d - 50 [Code number: 11210391001 / 121 039 001] Draft REHAU RAUPIANO PLUS access pipe, d - 50 [Code number: 11210391001 / 121 039 001]
REHAU RAUPIANO PLUS access pipe, d - 50 [Code number: 11210391001 / 121 039 001]
Details 		11210391001 903 rub

Rehau RAUPIANO access pipe provides quick access to the required section of the pipeline. The access pipe with diameter of 50 mm is used for quickly inspection of the drainage system section and cleaning it if necessary. Cover of the access pipe is round.

The access pipe is resistant to aggressive environments and high temperatures - the drainage system RAUPIANO PLUS disposes waste water with temperatures up to +90 °C. Installation is simple and convenient.

After installation of the access pipe you should tighten screw cap.

DN Z1 Z3 Weight
mm mm mm kg/pc
50 45 44 0,215
Photo Draft
Photo (CODE NUMBER CHANGED TO 11210941002) - REHAU RAUPIANO PLUS bend 15°, d - 50 [Code number: 11210941001 / 121 094 001] Draft (CODE NUMBER CHANGED TO 11210941002) - REHAU RAUPIANO PLUS bend 15°, d - 50 [Code number: 11210941001 / 121 094 001]
(CODE NUMBER CHANGED TO 11210941002) - REHAU RAUPIANO PLUS bend 15°, d - 50 [Code number: 11210941001 / 121 094 001]
Details 		11210941001

Rehau RAUPIANO PLUS bend provides the change direction of the pipeline at 15°. Diameter of the bens is 50 mm. It is equipped with rubber gasket. The bend is made of polypropylene modified with mineral additives.

Color: White.

Attention! After the stock is sold, the article will be replaced by: 11210941002.

Dy α z1 z2 Weight
mm   mm mm kg/pc
50 15° 5 9 0,049
Photo Draft
Photo (CODE NUMBER CHANGED TO 11210941003) - REHAU RAUPIANO PLUS Bend 15°, d - 50 [Code number: 11210941002 / 121 094 002] Draft (CODE NUMBER CHANGED TO 11210941003) - REHAU RAUPIANO PLUS Bend 15°, d - 50 [Code number: 11210941002 / 121 094 002]
(CODE NUMBER CHANGED TO 11210941003) - REHAU RAUPIANO PLUS Bend 15°, d - 50 [Code number: 11210941002 / 121 094 002]
Details 		11210941002

Application:

  • For sewer systems
  • For polymer pipes

Material: polypropylene RAU-PP (reinforced with minerals).

Colour: RAL 9003 white.

The fitting is equipped with rubber seals.

DN α z1 z2 Weight
mm mm mm mm kg/pc
50 15° 5 9 0,049
Photo Draft
Photo Ostendorf HT Bend 30° HTB, PP-H, d - 50 [Code number: 112110] Draft Ostendorf HT Bend 30° HTB, PP-H, d - 50 [Code number: 112110]
Ostendorf HT Bend 30° HTB, PP-H, d - 50 [Code number: 112110]
Details 		112110 59 rub

Application purpose:

  • For drainage systems
  • For rainwater systems
  • For ventilation systems

Colour: gray

Material: Polypropylene (PP-H).

d α Z1 Z2 l1
mm mm mm mm mm
50 30° 9 13 46

Download the installation instructions of product: HT bend

Chemical resistance of: HT system
Photo Draft
Photo (CODE NUMBER CHANGED TO 11211041002) - REHAU RAUPIANO PLUS bend 30°, d - 50 [Code number: 11211041001 / 121 104 001] Draft (CODE NUMBER CHANGED TO 11211041002) - REHAU RAUPIANO PLUS bend 30°, d - 50 [Code number: 11211041001 / 121 104 001]
(CODE NUMBER CHANGED TO 11211041002) - REHAU RAUPIANO PLUS bend 30°, d - 50 [Code number: 11211041001 / 121 104 001]
Details 		11211041001

Rehau RAUPIANO PLUS bend provides the change direction of the pipeline at 30°. Diameter of the bens is 50 mm. It is equipped with rubber gasket. The bend is made of polypropylene modified with mineral additives.

Color: White.

Attention! After the stock is sold, the article will be replaced by: 11211041002.

Dy α z1 z2 Weight
mm   mm mm kg/pc
50 30° 9 12 0,049
Photo Draft
Photo (CODE NUMBER CHANGED TO 11211041003) - REHAU RAUPIANO PLUS Bend 30°, d - 50 [Code number: 11211041002 / 121 104 002] Draft (CODE NUMBER CHANGED TO 11211041003) - REHAU RAUPIANO PLUS Bend 30°, d - 50 [Code number: 11211041002 / 121 104 002]
(CODE NUMBER CHANGED TO 11211041003) - REHAU RAUPIANO PLUS Bend 30°, d - 50 [Code number: 11211041002 / 121 104 002]
Details 		11211041002

Application:

  • For sewer systems
  • For polymer pipes

Material: polypropylene RAU-PP (reinforced with minerals).

Colour: RAL 9003 white.

The fitting is equipped with rubber seals.

DN α z1 z2 Weight
mm mm mm mm kg/pc
50 30° 9 12 0,077
Photo
Photo REHAU RAUPIANO PLUS Bend 30°, d - 50 [Code number: 11211041003 / 121 104 003]
REHAU RAUPIANO PLUS Bend 30°, d - 50 [Code number: 11211041003 / 121 104 003]
Details 		11211041003 105 rub
Photo Draft
Photo (DISCONTINUED FROM PRODUCTION) - REHAU RAUPIANO PLUS bend 45°, d - 50 [Code number: 11211141001 / 121 114 001] Draft (DISCONTINUED FROM PRODUCTION) - REHAU RAUPIANO PLUS bend 45°, d - 50 [Code number: 11211141001 / 121 114 001]
(DISCONTINUED FROM PRODUCTION) - REHAU RAUPIANO PLUS bend 45°, d - 50 [Code number: 11211141001 / 121 114 001]
Details 		11211141001

Rehau RAUPIANO PLUS bend provides the change direction of the pipeline at 45°. Diameter of the bens is 50 mm. It is equipped with rubber gasket. The bend is made of polypropylene modified with mineral additives.

Color: White.

Dy α z1 z2 Weight
mm   mm mm kg/pc
50 45° 12 16 0,055
Photo Draft
Photo (CODE NUMBER CHANGED TO 11211241002) - REHAU RAUPIANO PLUS bend 67°, d - 50 [Code number: 11211241001 / 121 124 001] Draft (CODE NUMBER CHANGED TO 11211241002) - REHAU RAUPIANO PLUS bend 67°, d - 50 [Code number: 11211241001 / 121 124 001]
(CODE NUMBER CHANGED TO 11211241002) - REHAU RAUPIANO PLUS bend 67°, d - 50 [Code number: 11211241001 / 121 124 001]
Details 		11211241001

Rehau RAUPIANO PLUS bend provides the change direction of the pipeline at 67°. Diameter of the bens is 50 mm. It is equipped with rubber gasket. The bend is made of polypropylene modified with mineral additives.

Color: White.

Attention! After the stock is sold, the article will be replaced by: 11211241002.

Dy α z1 z2 Weight
mm   mm mm kg/pc
50 67° 20 23 0,052
Photo Draft
Photo (CODE NUMBER CHANGED TO 11211241003) - REHAU RAUPIANO PLUS Bend 67°, d - 50 [Code number: 11211241002 / 121 124 002] Draft (CODE NUMBER CHANGED TO 11211241003) - REHAU RAUPIANO PLUS Bend 67°, d - 50 [Code number: 11211241002 / 121 124 002]
(CODE NUMBER CHANGED TO 11211241003) - REHAU RAUPIANO PLUS Bend 67°, d - 50 [Code number: 11211241002 / 121 124 002]
Details 		11211241002

Application:

  • For sewer systems
  • For polymer pipes

Material: polypropylene RAU-PP (reinforced with minerals).

Colour: RAL 9003 white.

The fitting is equipped with rubber seals.

DN α z1 z2 Weight
mm mm mm mm kg/pc
50 67° 27 27 0,057
Photo Draft
Photo (DISCONTINUED FROM PRODUCTION) - REHAU RAUPIANO PLUS bend 87°, d - 50 [Code number: 11211341001 / 121 134 001] Draft (DISCONTINUED FROM PRODUCTION) - REHAU RAUPIANO PLUS bend 87°, d - 50 [Code number: 11211341001 / 121 134 001]
(DISCONTINUED FROM PRODUCTION) - REHAU RAUPIANO PLUS bend 87°, d - 50 [Code number: 11211341001 / 121 134 001]
Details 		11211341001

Rehau RAUPIANO PLUS bend provides the change direction of the pipeline at 87°. Diameter of the bens is 50 mm. It is equipped with rubber gasket. The bend is made of polypropylene modified with mineral additives.

Color: White.

Dy α z1 z2 Weight
mm   mm mm kg/pc
50 87° 28 31 0,063
© Inrusstrade.ru 1999-2026. "Inrusstrade" Ltd. Copying and quoting is prohibited