Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Lenin Hills

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Наименование Article Цена
Photo Draft
Photo Hutterer & Lechner Shower tray waste outlet DN40 with coverplate d 86mm, vertical [Code number: HL 513/S] Draft Hutterer & Lechner Shower tray waste outlet DN40 with coverplate d 86mm, vertical [Code number: HL 513/S]
Hutterer & Lechner Shower tray waste outlet DN40 with coverplate d 86mm, vertical [Code number: HL 513/S]
Details 		HL 513/S

HL 513/S - it is shower tray waste outlet DN40 vertical. Waste outlet has stainless steel coverplate d 86 mm. It is made of polypropylene. Capacity of shower tray waste outlet is 0,75 l/s.

Diameter Capacity Material Weight
DN, mm l/s   gr
40 0,75 polypropylene 420
Photo Draft
Photo Geberit HDPE Rubber collar for traps, d 32 x 57 [Code number: 152.691.00.1] Draft Geberit HDPE Rubber collar for traps, d 32 x 57 [Code number: 152.691.00.1]
Geberit HDPE Rubber collar for traps, d 32 x 57 [Code number: 152.691.00.1]
Details 		152.691.00.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For bidets and washbasins

Material: EPDM

d di
mm mm
32 57
Photo Draft
Photo Wavin PVC Pressure Pipe systems Flange, PVC-U, d - 400 [Code number: 20176034] Draft Wavin PVC Pressure Pipe systems Flange, PVC-U, d - 400 [Code number: 20176034]
Wavin PVC Pressure Pipe systems Flange, PVC-U, d - 400 [Code number: 20176034]
Details 		20176034

ATTENTION! This product is temporarily unavailable for order!

d1 d2 d3 Z N x D DN
mm mm mm mm   mm
442 515 565 42 16x26 400
Photo Draft
Photo Geberit HDPE weld-neck collar, d56 [Code number: 363.744.16.1] Draft Geberit HDPE weld-neck collar, d56 [Code number: 363.744.16.1]
Geberit HDPE weld-neck collar, d56 [Code number: 363.744.16.1]
Details 		363.744.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For all drainage pipes

Material: HDPE

d D D1 H h h1
mm mm cm cm cm cm
56 9 6,8 6 3,6 0,8
Photo Draft
Photo Hutterer & Lechner Dip-tube with appliance hose connector, DN32x1 1/4' [Code number: HL 13/30] Draft Hutterer & Lechner Dip-tube with appliance hose connector, DN32x1 1/4' [Code number: HL 13/30]
Hutterer & Lechner Dip-tube with appliance hose connector, DN32x1 1/4' [Code number: HL 13/30]
Details 		HL 13/30 1 191 rub

Dip-tube HL 13/30 for connect to washing machines and dishwashers 3/4". Diameter of dip-tube is 32 mm, it is made of polypropylene. HL 13/30 is equipped with a non-return valve, which reduces likelihood of flooding. There is also a flat union nut 5/4"or 6/4".

Diameter Material Weight
DN, mm   gr
32 polypropylene 100
Photo Draft
Photo Hutterer & Lechner Universal-adapter, 1 1/2'xDN40x3/4' [Code number: HL 17] Draft Hutterer & Lechner Universal-adapter, 1 1/2'xDN40x3/4' [Code number: HL 17]
Hutterer & Lechner Universal-adapter, 1 1/2'xDN40x3/4' [Code number: HL 17]
Details 		HL 17

Universal-adapter HL 17 is equipped with a gasket. Universal-adapter 6/4" х DN40 х 3/4" has a union nut also.

Diameter Material Weight
    gr
6/4" х 40 х 3/4" polypropylene 35
Photo Draft
Photo Hutterer & Lechner Tee with HL19.2, DN32x1 1/4' [Code number: HL 19T.2/30] Draft Hutterer & Lechner Tee with HL19.2, DN32x1 1/4' [Code number: HL 19T.2/30]
Hutterer & Lechner Tee with HL19.2, DN32x1 1/4' [Code number: HL 19T.2/30]
Details 		HL 19T.2/30

Tee DN32 x 1 1/4' with appliance hose connector 8 - 13 mm HL19.2 for washing machine and dishwasher.

Diameter Material Weight
DN, mm   gr
32 polypropylene 63
Photo Draft
Photo Hutterer & Lechner Coverplate, d 86 [Code number: HL 514/S.1] Draft Hutterer & Lechner Coverplate, d 86 [Code number: HL 514/S.1]
Hutterer & Lechner Coverplate, d 86 [Code number: HL 514/S.1]
Details 		HL 514/S.1

Application purposes:

  • For shower trap

Dimension: d 86 mm

Material: stainless steel

Weight: 0,095 kg
Photo Draft
Photo Geberit HDPE Rubber collar for traps, d 40 x 57 [Code number: 152.692.00.1] Draft Geberit HDPE Rubber collar for traps, d 40 x 57 [Code number: 152.692.00.1]
Geberit HDPE Rubber collar for traps, d 40 x 57 [Code number: 152.692.00.1]
Details 		152.692.00.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For bidets and washbasins

Material: EPDM

d di
mm mm
40 57
Photo Draft
Photo Wavin PVC Pressure Pipe systems Flange adapter, PVC-U, d 72 [Code number: 20126044] Draft Wavin PVC Pressure Pipe systems Flange adapter, PVC-U, d 72 [Code number: 20126044]
Wavin PVC Pressure Pipe systems Flange adapter, PVC-U, d 72 [Code number: 20126044]
Details 		20126044

ATTENTION! This product is temporarily unavailable for order!

d1 d2 Z B C d5
mm mm mm mm mm mm
50 72 3 31 8 61
Photo Draft
Photo Geberit HDPE weld-neck collar, d63 [Code number: 364.744.16.1] Draft Geberit HDPE weld-neck collar, d63 [Code number: 364.744.16.1]
Geberit HDPE weld-neck collar, d63 [Code number: 364.744.16.1]
Details 		364.744.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For all drainage pipes

Material: HDPE

d D D1 H h h1
mm mm cm cm cm cm
63 9 6,8 6 3,7 0,8
Photo Draft
Photo Hutterer & Lechner Dip-tube with appliance hose connector, DN40x1 1/2' [Code number: HL 13/40] Draft Hutterer & Lechner Dip-tube with appliance hose connector, DN40x1 1/2' [Code number: HL 13/40]
Hutterer & Lechner Dip-tube with appliance hose connector, DN40x1 1/2' [Code number: HL 13/40]
Details 		HL 13/40 1 191 rub

Dip-tube HL 13/40 for connect to washing machines and dishwashers 3/4". Diameter of dip-tube is 40 mm, it is made of polypropylene. HL 13/40 is equipped with a non-return valve, which reduces likelihood of flooding. There is also a flat union nut 5/4"or 6/4".

Diameter Material Weight
DN, mm   gr
40 polypropylene 110
Photo Draft
Photo Hutterer & Lechner Tee with HL19.2, DN40x1 1/2' [Code number: HL 19T.2/40] Draft Hutterer & Lechner Tee with HL19.2, DN40x1 1/2' [Code number: HL 19T.2/40]
Hutterer & Lechner Tee with HL19.2, DN40x1 1/2' [Code number: HL 19T.2/40]
Details 		HL 19T.2/40

Tee DN40 x 1 1/2' with appliance hose connector 8 - 13 mm HL19.2 for washing machine and dishwasher.

Diameter Material Weight
DN, mm   gr
40 polypropylene 65
Photo Draft
Photo Hutterer & Lechner Threaded extension, 1'x68mm [Code number: HL 420] Draft Hutterer & Lechner Threaded extension, 1'x68mm [Code number: HL 420]
Hutterer & Lechner Threaded extension, 1'x68mm [Code number: HL 420]
Details 		HL 420 1 030 rub

Threaded extension HL 420 is made of polypropylene. With O-ring. Weight of the product is small - only 20 grams. It can use with HL 400, HL 405(E), HL 406(E)(.2), HL 410, HL 440.

Diameter Material Weight
inch   gr
1" polypropylene 20
Photo Draft
Photo Hutterer & Lechner Coverplate, gold plated, d 86 [Code number: HL 514/S.11] Draft Hutterer & Lechner Coverplate, gold plated, d 86 [Code number: HL 514/S.11]
Hutterer & Lechner Coverplate, gold plated, d 86 [Code number: HL 514/S.11]
Details 		HL 514/S.11 5 969 rub

Application purposes:

  • For shower trap

Dimension: d 86 mm

Material: MS - vergoldet

Characteristics: gold plated

Weight: 0,095 kg
Photo Draft
Photo Geberit HDPE Rubber collar for traps, d 50 x 57 [Code number: 152.693.00.1] Draft Geberit HDPE Rubber collar for traps, d 50 x 57 [Code number: 152.693.00.1]
Geberit HDPE Rubber collar for traps, d 50 x 57 [Code number: 152.693.00.1]
Details 		152.693.00.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For bidets and washbasins

Material: EPDM

d di
mm mm
50 57
Photo Draft
Photo Wavin PVC Pressure Pipe systems Flange adapter, PVC-U, d 90 [Code number: 20134044] Draft Wavin PVC Pressure Pipe systems Flange adapter, PVC-U, d 90 [Code number: 20134044]
Wavin PVC Pressure Pipe systems Flange adapter, PVC-U, d 90 [Code number: 20134044]
Details 		20134044

ATTENTION! This product is temporarily unavailable for order!

d1 d2 Z B C d5
mm mm mm mm mm mm
63 90 3 38 9 77
Photo Draft
Photo Geberit HDPE weld-neck collar, d75 [Code number: 365.744.16.1] Draft Geberit HDPE weld-neck collar, d75 [Code number: 365.744.16.1]
Geberit HDPE weld-neck collar, d75 [Code number: 365.744.16.1]
Details 		365.744.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For all drainage pipes

Material: HDPE

d D D1 H h h1
mm mm cm cm cm cm
75 11 7,8 6,5 4 0,9
Photo
Photo Hutterer & Lechner Stainless steel plate for HL 404.1 [Code number: HL 0404.1E]
Hutterer & Lechner Stainless steel plate for HL 404.1 [Code number: HL 0404.1E]
Details 		HL 0404.1E

Application area:

  • For washing devices

Characteristics:

  • Material: stainless steel
  • Dimension: 108х226 mm

Weight: 0,118 kg

It suitable for use with HL404, HL404.1.
Photo Draft
Photo Hutterer & Lechner Dip-tube with appliance hose connector, DN50x1 1/2' [Code number: HL 13/50] Draft Hutterer & Lechner Dip-tube with appliance hose connector, DN50x1 1/2' [Code number: HL 13/50]
Hutterer & Lechner Dip-tube with appliance hose connector, DN50x1 1/2' [Code number: HL 13/50]
Details 		HL 13/50 1 191 rub

Dip-tube HL 13/50 for connect to washing machines and dishwashers 3/4". Diameter of dip-tube is 50 mm, it is made of polypropylene. HL 13/50 is equipped with a non-return valve, which reduces likelihood of flooding. There is also a flat union nut 5/4"or 6/4".

Diameter Material Weight
DN, mm   gr
50 polypropylene 115
© Inrusstrade.ru 1999-2026. "Inrusstrade" Ltd. Copying and quoting is prohibited