Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
Crosses are used to create two branches (in some cases three) from the main pipeline.
Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
Reducers are used to connect sewer pipes with different diameters.
Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
Siphons are mounted with sanitary equipment.
Brackets allow you to rigidly fix the pipeline system.
Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.

Photo Наименование Article Цена

Gasket PAM-GLOBAL® S

Details

Nominal internal diameter	Code number EPDM	Weight	Code number NBR	Weight
DN		kg		kg
75	179894	0,2	179895	0,2
100	207320	0,3	207319	0,3
125	207335	0,3	207334	0,3

Expansion plug PAM-GLOBAL® Plus

Details

Nominal internal diameter	L	Weight	Code number
DN	mm	kg
50	47	0,22	155303
75	71	0,6	155322
100	55	1,0	155351
125	53	1,3	155392
150	53	2,1	155417
200	63	4,2	155450
250	100	6,2	155478
300	100	9	155495

PAM-GLOBAL® Plus Stack support pipe

Details

Nominal internal diameter	L	H	W	b	e	f	g	Ø ext	Weight	Code number
DN									kg
50	195	220	108	8	150	17	30	108	2,5	212273
75	218	220	133	8	175	19	30	133	3,1	211041
100	259	220	162	8	214	20	32	162	4,3	171912
125	275	220	187	8	228	20	32	197	5,4	211042
150	300	220	222	8	255	22	32	222	7,2	171914
300	498	300	406	8	448	30	40	406	26,5	208264
400	600	340	508	10	550	30	50	508	43,9	on request

Dimensions are presented in mm

Usage example

Anti syphonic trap PAM-GLOBAL® S

Details

Nominal internal diameter	I	h	X1	X2	X3	X4	w	Weight	Code number
DN	mm	mm	mm	mm	mm	mm	mm	kg
50	165	230	183	47	136	24	80	2,4	156422
80	240	300	231	69	198,5	41,5	80	5,0	156522

PAM-GLOBAL® Plus double branch 88˚

Details

Nominal internal diameter	X₁	X₂	X₃	X₄	X₅	L	Weight	Code number
DN							kg
100x100x100	115	115	120	105	105	230	3,70	155382

Dimensions are presented in mm

Hutterer & Lechner Tubular trap with ball-joint outlet, DN40x1 1/2' [Code number: HL 100G/40]

Details

HL 100G/40

2 079 rub

Tubular trap HL 100G/40 DN40 horizontal is equipped with a ball-joint outlet. The device is made of polypropylene and has weight of 220 g. There is threaded connection 6/4". Height of the nozzle can adjust if necessary.

Diameter	Material	Weight
DN, mm		gr
40	polypropylene	220

Documentation

Download data sheet: Tubular trap HL 100G/40

Download example of product installation: Tubular trap HL 100G/40

Hutterer & Lechner Wash-basin trap with appliance hose connector and rosette, DN32x1 1/4' [Code number: HL 132.1/30]

Details

HL 132.1/30

2 925 rub

HL 132.1/30 wash-basin trap DN32 x 1 1/4' horizontal is connected to a wash basin. It is made of polypropylene and has a weight is 220 grams. The wash-basin trap can connect to a dishwasher or washing machine, height of the dip tube is adjusted. HL 132.1/30 is equipped with a decorative rosette, which allows it fits easily into the interior.

Diameter	Material	Weight
DN, mm		gr
32	polypropylene	220

Hutterer & Lechner Waste and overflow with plug and chain for bath tubs, 1 1/2' [Code number: HL 51]

Details

HL 51

3 216 rub

Application area:

For bath
For shower trays

Characteristics:

Material: PP
Size: 6/4"
Capacity: 0.92 l/s
Mounted at a height of 80 mm

Product weight: 0.29 kg

88˚ corner branch PAM-GLOBAL® S (angle of entry 45˚, angle of thrust 90˚)

Details

Nominal internal diameter	X₁	X₂	X₃	L	Weight	Code number
DN					kg
80x80x80	95	95	95	180	2,0	179682
100x70x70*	102	110	88	190	2,7	155839
100x80x80	100	110	90	220	2,8	179683
100x100x100	115	120	105	230	3,4	155860
125x70x70	107	125	93	200	3,7	155888
125x100x100	125	130	110	235	5,0	155889
150x100x100	130	145	115	245	7,1	155919

Dimensions are presented in mm

*Diameter 80 gradually replace diameter 70

Bend PAM-GLOBAL® Plus 45˚

Details

Nominal internal diameter	X	Weight	Code number
DN	mm	kg
50	50	0,56	155201
80	60	0,79	176735
100	70	1,40	155236
125	80	2,25	155261
150	90	3,00	155277
200	110	5,30	155289
250	130	9,50	155481
300	155	15,90	155498
400	247	34,40	155509

PAM-GLOBAL® Plus T-shaped connector for pipes

Details

Nominal internal diameter	X₁	X₂	K₁	K₂	Weight	Code number
DN	mm	mm	mm	mm	kg
50 x 50 x 50	200	160	125	85	2,5	155214

Bend PAM-GLOBAL® S 45˚

Details

Nominal internal diameter	X	Weight	Code number
DN	mm	kg
50	50	0,6	155751
70*	60	0,7	155780
80	60	0,8	176704
100	70	1,4	155815
125	80	2,3	155869
150	90	3,0	155902
200	110	5,3	155931
250	130	9,5	155947
300	155	15,9	155959
400	247	34,4	157175

*Diameter 80 gradually replace diameter 70

Single branch PAM-GLOBAL® S 88˚ with elongated side, angle of entry 45˚

Details

Nominal internal diameter	X₁	X₂	X₃	L	K	Weight	Code number
DN						kg
100x100	325	115	105	430	210	4,6	155861

Dimensions are presented in mm

Anti syphonic trap PAM-GLOBAL® S with bottom access door

Details

Nominal internal diameter	L	H	W	c	d	Weight	Code number
DN	mm	mm	mm	mm	mm	kg
50	165	255	58	80	187	2,5	229107

Photo PAM-GLOBAL® Plus Corner branch 45°

PAM-GLOBAL® Plus Corner branch 45°

Details

Nominal internal diameter	L	H	W	b	c	d	p	q	r	Weight	Code number
DN										kg
100x100	227	260	227	190	190	70	242	166	46	5,2	155387

Dimensions are presented in mm

Hutterer & Lechner Tubular trap with ball-joint outlet, DN50x1 1/2' [Code number: HL 100G/50]

Details

HL 100G/50

1 876 rub

Tubular trap HL 100G/50 DN50 horizontal is equipped with a ball-joint outlet. The device is made of polypropylene and has weight of 225 g. There is threaded connection 6/4". Height of the nozzle can adjust if necessary.

Diameter	Material	Weight
DN, mm		gr
50	polypropylene	225

Documentation

Download data sheet: Tubular trap HL 100G/50

Download example of product installation: Tubular trap HL 100G/50

Hutterer & Lechner Wash-basin trap with appliance hose connector and rosette, DN40x1 1/4' [Code number: HL 132.1/40]

Details

HL 132.1/40

2 925 rub

HL 132.1/40 wash-basin trap DN40 x 1 1/4' horizontal is connected to a wash basin. It is made of polypropylene and has a weight is 225 grams. The wash-basin trap can connect to a dishwasher or washing machine, height of the dip tube is adjusted. HL 132.1/40 is equipped with a decorative rosette, which allows it fits easily into the interior.

Diameter	Material	Weight
DN, mm		gr
40	polypropylene	225

Hutterer & Lechner Waste and overflow assembly with ball-joint tub-trap 1 1/2' incl. hose connector 8-13mm [Code number: HL 555N]

Details

HL 555N

13 170 rub

Application area:

For bath

Characteristics:

Material: PP (visible parts are chrome plated)
Size: DN40/50
There is an overflow
Drain hole diameter is 60mm
Exhaust type: swivel (allows it to rotate 280° horizontally as well as 10° vertically)
There is a fitting that allows you to connect a drainage tube (size from 8 to 13 mm)
Equipped with double seal for release
Includes Bowden cable - CrNi 18/10 steel used for manufacturing

Capacity: 0.67 l/s.

Mounting at a height of 107 mm.

Product weight: 0,897 kg.