Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
Crosses are used to create two branches (in some cases three) from the main pipeline.
Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
Reducers are used to connect sewer pipes with different diameters.
Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
Siphons are mounted with sanitary equipment.
Brackets allow you to rigidly fix the pipeline system.
Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.

Photo Наименование Article Цена

Double branch PAM-GLOBAL® S 68˚ with elongated side

Details

Nominal internal diameter	L	H	W	b	c	d	p	q	r	Weight	Code number
DN										kg
100x100x100	280	414	110	130	130	284	244	281	383	6,3	176896

Dimensions are presented in mm

Hutterer & Lechner Cover plate for HL 138 [Code number: HL 0138.2E] (Russia)

Details

HL 0138.2E

Application area:

For air condition and ventilation

Characteristics:

Material: ABS (PS)

Weight: 0,03 kg

Hutterer & Lechner Trap seal cartridge for HL520-series [Code number: HL 0520.2E]

Details

HL 0520.2E

Application area:

For shower trays

Characteristics:

Material: EPDM

Weight: 0,048 kg

Packaging data (PE-bag)

Height	Width	Depth	Weight	Volume
mm	mm	mm	kg	m3
70	120	120	0,05	0,001008000

Hutterer & Lechner Space saver tubular trap with connector DN40x1 1/2' for double sinks, ball-joint outlet, DN50x1 1/2' [Code number: HL 126.2/50]

Details

HL 126.2/50

6 869 rub

Space saver tubular trap HL 126.2/50 DN 50 horizontal is made of polypropylene. This device is designed so that it saves a lot of space under a sink, and trap is equipped with ball-joint outlet. Trap with connector DN40 x 1 1/2' for double sinks.

Diameter	Material	Weight
DN, mm		gr
50	polypropylene	590

Hutterer & Lechner Concealed trap with removable trap insert, DN50 [Code number: HL 134.0/50]

Details

HL 134.0/50

3 575 rub

HL 134.0/50 concealed trap is embedded into the wall. HL 134.0/50 is made of polypropylene, it has diameter of 50 mm and capacity of 0.38 l/s. Trap insert can be removed if necessary.

Diameter	Material	Capacity	Weight
DN, mm		l/s	gr
50	polypropylene	0,38	385

Hutterer & Lechner Elbow and tube, DN40x1 1/2' [Code number: HL 16]

Details

HL 16

1 191 rub

Application area:

For bath

Characteristics:

Material: PP
Size: DN40
Includes 6/4" swivel nut
Acts as an extension

Weight: 0.080 kg.

Double branch PAM-GLOBAL® S 88˚ with elongated side

Details

Nominal internal diameter	L	H	W	b	c	d	p	q	r	Weight	Code number
DN										kg
100x100x100	243	405	110	110	120	295	222	244	354	5,9	176883

Dimensions are presented in mm

Bend PAM-GLOBAL® S 88˚ (two joint bends 44˚)

Details

According to DIN 1986, part 1, section 6.1.2, the changes of the direction of main pipelines and sewers may be fulfilled only with using prefabricated pipe bend, and each individual bend can have a maximum angle of 45^˚. In some cases, for these purposes can be used two pipe bends 45^˚. Due to the double knee one connecting element is saved and the installation becomes easier. In addition, this fitting provides a good opportunity to place the fastening element in its middle. The bend is also intended for use as a transition from the riser to a horizontal pipe, and vice versa.

Nominal internal diameter	X₁	X₂	X₃	Weight	Code number
DN	mm	mm	mm	kg
50	50	100	121	1,0	155754
70*	60	120	145	1,4	155783
80	60	120	145	1,5	176707
100	70	140	170	3,1	155819
125	80	160	195	4,2	155872
150	90	180	219	7,0	155905

*Diameter 80 gradually replace diameter 70

Photo Manifold connectors PAM-GLOBAL® S multi-waste

Manifold connectors PAM-GLOBAL® S multi-waste

Details

Nominal internal diameter	L	H	W	a	d	e	Weight	Code number
DN	mm	mm	mm	mm	mm	mm	kg
100	204	125	200	43	142	62	3,2	175626
150	265	165	290	70	184	81	6,1	175629

Single long arm branch PAM-GLOBAL® S

Details

Nominal internal diameter	L	H	W	a	b	c	p	Weight	Code number
DN								kg
100x100	282	450	110	450	282	70	340	6	156726

Dimensions are presented in mm

Double bend PAM-GLOBAL® Plus 88˚

Details

Nominal internal diameter	L	H	W	a	b	c	o	Weight	Code number
DN	mm	mm	mm	mm	mm	mm	mm	kg
50	148	148	58	121	50	100	148	1	179343
75	183	183	83	145	60	120	183	1,5	235801
100	228	228	110	170	70	140	228	2,8	155359
150	303	303	160	219	90	180	303	6,3	155422

Hutterer & Lechner Lip seal for HL 136N [Code number: HL 01088D]

Details

HL 01088D

991 rub

Characteristics of HL sewage equipment:

Complies with ISO 9001
Safety for ecology and health
Products undergo laboratory testing
Durability
Attractive appearance

Suitable for	Weight
	kg/pc
HL 136N	0,001

Hutterer & Lechner Waste gasket for HL520 [Code number: HL 01100D]

Details

HL 01100D

Characteristics of HL sewage equipment:

Complies with ISO 9001
Safety for ecology and health
Products undergo laboratory testing
Durability
Attractive appearance

Material: EPDM.

Size	Weight
mm	kg/pc
109x88	0,021

Hutterer & Lechner 90° angled brass-connector, chrome plated, DN32 [Code number: HL 134.1C]

Details

HL 134.1C

8 319 rub

HL 134.1C 90° angled brass-connector is intended for HL 134 and HL 134.0. Angled brass-connector is made of brass, it is chrome plated, diameter 32 x 5/4". Height of the dip tube can be controlled. It also has a threaded connection 5/4.

Diameter	Material	Weight
DN, mm		gr
32 х 5/4"	brass chrome plated	290

Documentation

Download example of product installation: 90° angled brass-connector HL 134.1C

Hutterer & Lechner Non-return valve, 1' [Code number: HL 3]

Details

HL 3

2 054 rub

HL 3 - it is non-return valve 1' with hose connector 3/4'. Valve is made of polypropylene. Weight HL 3 is small - it is only 60 g.

Diameter		Material	Weight
inlet	outlet		gr
1"	3/4"	polypropylene	60

Hutterer & Lechner Visual parts solid brass (price on request) [Code number: HL 555N.2]

Details

HL 555N.2

Application purposes:

For waste and overflow assembly

Characteristics:

brass

Material: Edelmessing

Weight: 0,305 kg

Corner branch PAM-GLOBAL® S 45˚

Details

Nominal internal diameter	L	H	W	b	c	d	p	q	r	Weight	Code number
DN										kg
100x100x100	227	260	227	190	190	70	242	166	46	5,2	156716

Dimensions are presented in mm

Bend PAM-GLOBAL® Plus 135˚ for bypass line

Details

Nominal internal diameter	X	K	L	Weight	Code number
DN	mm	mm	mm	kg
100	312	100	150	5,0	155239

Circuitous Bend PAM-GLOBAL® S 135˚ for bypass system

Details

Nominal internal diameter	X	K	L	Weight	Code number
DN	mm	mm	mm	kg
100	312	100	150	5	155818

К - maximum cut length

Photo PAM-GLOBAL® S multi-waste sewer collectors

PAM-GLOBAL® S multi-waste sewer collectors

Details

Diameter	L	H	W	b	d	f	g	h	j	j	k	Weight	Code number
DN, mm	mm	mm	mm	mm	mm	mm	mm	mm	mm	mm	mm	kg
100	445	582	445	445	340	45	174	22	165	120	110	12,8	261138
150	445	591	445	445	345	55	181	25	220	170	160	17,3	261434