Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Lenin Hills

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Наименование Article Цена
Photo Draft
Photo Hutterer & Lechner Shower channel "PRIMUS-LINE" with EPS installation block, high stainless steel frame, without cover, horizontal, DN 50 [Code number: HL 531.0/18] Draft Hutterer & Lechner Shower channel "PRIMUS-LINE" with EPS installation block, high stainless steel frame, without cover, horizontal, DN 50 [Code number: HL 531.0/18]
Hutterer & Lechner Shower channel "PRIMUS-LINE" with EPS installation block, high stainless steel frame, without cover, horizontal, DN 50 [Code number: HL 531.0/18]
Details 		HL 531.0/18

Shower channel HL 531.0/18 is integrated in an EPS-installation block. It is also equipped with stainless steel frame, but without cover. Waterproof, fleece-laminated surface with 3% incline. For direct tiling. You can fine-tune of shower channel. Channel is equipped with PRIMUS-trap - this device allows you forget about the unpleasant smell of sewage. Another important advantage of the shower channel is its capacity - 0.6 l/s. For near-wall installation. Including lot cover..

Capacity Diameter Weight
l/s DN, mm kg
0,60 50 2,28
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
1215 210 145 2,895 0,03699675
Photo Draft
Photo Hutterer & Lechner Shower channel "PRIMUS-LINE" with EPS installation block, high stainless steel frame, without cover, horizontal, DN 50 [Code number: HL 531.0/23] Draft Hutterer & Lechner Shower channel "PRIMUS-LINE" with EPS installation block, high stainless steel frame, without cover, horizontal, DN 50 [Code number: HL 531.0/23]
Hutterer & Lechner Shower channel "PRIMUS-LINE" with EPS installation block, high stainless steel frame, without cover, horizontal, DN 50 [Code number: HL 531.0/23]
Details 		HL 531.0/23

Shower channel HL 531.0/23 is integrated in an EPS-installation block. It is also equipped with stainless steel frame, but without cover. Waterproof, fleece-laminated surface with 3% incline. For direct tiling. You can fine-tune of shower channel. Channel is equipped with PRIMUS-trap - this device allows you forget about the unpleasant smell of sewage. Another important advantage of the shower channel is its capacity - 0.6 l/s. For near-wall installation. Including lot cover..

Capacity Diameter Weight
l/s DN, mm kg
0,60 50 2,38
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
1215 210 145 2,995 0,03699675
Photo Draft
Photo Hutterer & Lechner Shower channel "PRIMUS-LINE" with EPS installation block, high stainless steel frame, without cover [Code number: HL 531.0/28] Draft Hutterer & Lechner Shower channel "PRIMUS-LINE" with EPS installation block, high stainless steel frame, without cover [Code number: HL 531.0/28]
Hutterer & Lechner Shower channel "PRIMUS-LINE" with EPS installation block, high stainless steel frame, without cover [Code number: HL 531.0/28]
Details 		HL 531.0/28

Shower channel HL 531.0/28 is integrated in an EPS-installation block. It is also equipped with stainless steel frame, but without cover. Waterproof, fleece-laminated surface with 3% incline. For direct tiling. You can fine-tune of shower channel. Channel is equipped with PRIMUS-trap - this device allows you forget about the unpleasant smell of sewage. Another important advantage of the shower channel is its capacity - 0.6 l/s. For near-wall installation. Including lot cover..

Diameter Capacity Weight
DN, mm l/s gr
50 0,6 2480
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
1215 210 145 3,095 0,03699675
Photo Draft
Photo Hutterer & Lechner Shower channel "PRIMUS-LINE" with EPS installation block, high stainless steel frame and cover (1200х200х79mm), horizontal [Code number: HL 531/18] Draft Hutterer & Lechner Shower channel "PRIMUS-LINE" with EPS installation block, high stainless steel frame and cover (1200х200х79mm), horizontal [Code number: HL 531/18]
Hutterer & Lechner Shower channel "PRIMUS-LINE" with EPS installation block, high stainless steel frame and cover (1200х200х79mm), horizontal [Code number: HL 531/18]
Details 		HL 531/18

Shower channel HL 531/18 is integrated in an EPS-installation block. It is also equipped with stainless steel frame. Waterproof, fleece-laminated surface with 3% incline. For direct tiling. You can fine-tune of shower channel. Channel is equipped with PRIMUS-trap - this device allows you forget about the unpleasant smell of sewage. Another important advantage of the shower channel is its capacity - 0.6 l/s. For near-wall installation. Including lot cover..

Capacity Dimensions Length of cover Diameter Weight
l/s mm mm DN, mm kg
0,60 1200х200 480 50 2,69
 
Material of spare parts
"PRIMUS" trap Installation block
   
polypropylene EPS
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
145 210 1215 3,305 0,03699675
Photo Draft
Photo Hutterer & Lechner Shower channel "PRIMUS-LINE" with EPS installation block, high stainless steel frame and cover (1200х200х79mm), horizontal [Code number: HL 531/23] Draft Hutterer & Lechner Shower channel "PRIMUS-LINE" with EPS installation block, high stainless steel frame and cover (1200х200х79mm), horizontal [Code number: HL 531/23]
Hutterer & Lechner Shower channel "PRIMUS-LINE" with EPS installation block, high stainless steel frame and cover (1200х200х79mm), horizontal [Code number: HL 531/23]
Details 		HL 531/23

Shower channel HL 531/23 is integrated in an EPS-installation block. It is also equipped with stainless steel frame. Waterproof, fleece-laminated surface with 3% incline. For direct tiling. You can fine-tune of shower channel. Channel is equipped with PRIMUS-trap - this device allows you forget about the unpleasant smell of sewage. Another important advantage of the shower channel is its capacity - 0.6 l/s. For near-wall installation. Including lot cover..

Capacity Dimensions Length of cover Diameter Weight
l/s mm mm DN, mm kg
0,60 1200х200 480 50 2,79
 
Material of spare parts
"PRIMUS" trap Installation block
   
polypropylene EPS
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
145 210 1215 3,405 0,03699675
Photo
Photo Hutterer & Lechner Shower channel "PRIMUS-LINE" with EPS installation block, high stainless steel frame and cover (1200х200х79mm), horizontal [Code number: HL 531/28]
Hutterer & Lechner Shower channel "PRIMUS-LINE" with EPS installation block, high stainless steel frame and cover (1200х200х79mm), horizontal [Code number: HL 531/28]
Details 		HL 531/28

Shower channel HL 531/28 is integrated in an EPS-installation block. It is also equipped with stainless steel frame. Waterproof, fleece-laminated surface with 3% incline. For direct tiling. You can fine-tune of shower channel. Channel is equipped with PRIMUS-trap - this device allows you forget about the unpleasant smell of sewage. Another important advantage of the shower channel is its capacity - 0.6 l/s. For near-wall installation. Including lot cover..

Capacity Dimensions Length of cover Diameter Weight
l/s mm mm DN, mm kg
0,60 1200х200 480 50 2,89
 
Material of spare parts
"PRIMUS" trap Installation block
   
polypropylene EPS
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
145 210 1215 3,505 0,03699675
Hutterer Lechner Shower channel with a "DRY" Primus blue siphon, built into the mounting plate (1200x190x75 mm), complete with a HL0531S grate, with a horizontal outlet DN50 [Code number: HL 531Prblue]
Details 		HL 531Prblue 73 769 rub
Photo Draft
Photo Hutterer & Lechner Underlay-element, 2 parts [Code number: HL 531U] Draft Hutterer & Lechner Underlay-element, 2 parts [Code number: HL 531U]
Hutterer & Lechner Underlay-element, 2 parts [Code number: HL 531U]
Details 		HL 531U

Application area:

  • For barriere-free showers

Characteristics:

  • Material: EPS - 20
  • Dimension: 1200 x 185 mm
  • installation height: 20 mm

Weight: 0,196 kg

 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
98 1204 264 0,432 0,031149888
Photo Draft
Photo Hutterer & Lechner Drain body InFloor, with ball-joint, adjustable 0-15 degrees, DN 50 [Code number: HL 53K] Draft Hutterer & Lechner Drain body InFloor, with ball-joint, adjustable 0-15 degrees, DN 50 [Code number: HL 53K]
Hutterer & Lechner Drain body InFloor, with ball-joint, adjustable 0-15 degrees, DN 50 [Code number: HL 53K]
Details 		HL 53K 30 281 rub

Drain body InFloor, outlet DN50 horizontal, polypropylene, with ball-joint, adjustable 0-15 degrees.

Diameter Capacity Mounting height Weight Material  
DN mm mm l/s mm kg  
50 0,8 90 1,336 PP  
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
100 200 575 1,636 0,0115

Documentation

Download data sheet: Drain body kit HL 53K
Photo Draft
Photo Hutterer & Lechner Drain body "Wall Duo", horizontal, 2 x DN50 [Code number: HL 53K.2] Draft Hutterer & Lechner Drain body "Wall Duo", horizontal, 2 x DN50 [Code number: HL 53K.2]
Hutterer & Lechner Drain body "Wall Duo", horizontal, 2 x DN50 [Code number: HL 53K.2]
Details 		HL 53K.2 52 052 rub

HL 53K.2 - drain body for flat slot shower channel. Guaranteed service life is 50 years (with correct operation of the device, in particular when draining liquids whose temperature does not exceed +100°C). The capacity of the trap is 1,45 l/s.

Diameter Capacity Load Weight
DN, mm l/s kg kg
2 x DN50 300 1,45 3.48
 
Material of spare parts
Trap cartridge Body Waterproofing sheet
     
polypropylene polypropylene Thermoplastic elastomer
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
100 200 1115 3,48 0,022300000

Documentation

Download data sheet: Drain body kit HL 53K.2
Photo Draft
Photo Hutterer & Lechner Drain body InFloor CeraDrain, horizontal with polymere concrete collar, DN 50 [Code number: HL 53KC] Draft Hutterer & Lechner Drain body InFloor CeraDrain, horizontal with polymere concrete collar, DN 50 [Code number: HL 53KC]
Hutterer & Lechner Drain body InFloor CeraDrain, horizontal with polymere concrete collar, DN 50 [Code number: HL 53KC]
Details 		HL 53KC 71 498 rub

HL 53KC - drain body for flat slot shower channel. Guaranteed service life is 50 years (with correct operation of the device, in particular when draining liquids whose temperature does not exceed +100°C). The capacity of the trap is 0,80 l/s.

Diameter Capacity Weight
DN, mm l/s kg
50 0.80 4,32
 
Material of spare parts
Trap cartridge Body
   
polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
140 220 670 4,64 0,020636000

Documentation

Download data sheet: Drain body kit HL 53KFC
Photo Draft
Photo Hutterer & Lechner Drain body InFloor, DN40 [Code number: HL 53KF] Draft Hutterer & Lechner Drain body InFloor, DN40 [Code number: HL 53KF]
Hutterer & Lechner Drain body InFloor, DN40 [Code number: HL 53KF]
Details 		HL 53KF 30 281 rub

Drain body InFloor, outlet DN40 horizontal, polypropylene, with ball-joint, adjustable 0-15 degrees.

Diameter Capacity Mounting height Weight Material  
DN mm mm l/s mm kg  
40 0,4 65 1,25 PP  
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
100 200 575 1,55 0,0115

Documentation

Download data sheet: Drain body kit HL 53KF
Photo Draft
Photo Hutterer & Lechner Drain body InFloor CeraDrain, horizontal, flat with polymere concrete collar, DN 40 [Code number: HL 53KFC] Draft Hutterer & Lechner Drain body InFloor CeraDrain, horizontal, flat with polymere concrete collar, DN 40 [Code number: HL 53KFC]
Hutterer & Lechner Drain body InFloor CeraDrain, horizontal, flat with polymere concrete collar, DN 40 [Code number: HL 53KFC]
Details 		HL 53KFC 76 942 rub

HL 53KFC - drain body for flat slot shower channel. Guaranteed service life is 50 years (with correct operation of the device, in particular when draining liquids whose temperature does not exceed +100°C). The capacity of the trap is 0.40 l/s.

Diameter Capacity Load Weight
DN, mm l/s kg kg
40 300 0.40 4.62
 
Material of spare parts
Trap cartridge Body
   
polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
140 220 670 4,62 0,020636000

Documentation

Download data sheet: Drain body kit HL 53KFC
Photo Draft
Photo Hutterer & Lechner Drain body InFloor, vertical, DN 50 [Code number: HL 53KV] Draft Hutterer & Lechner Drain body InFloor, vertical, DN 50 [Code number: HL 53KV]
Hutterer & Lechner Drain body InFloor, vertical, DN 50 [Code number: HL 53KV]
Details 		HL 53KV 40 931 rub

HL 53KV - drain body for flat slot shower channel. Guaranteed service life is 50 years (with correct operation of the device, in particular when draining liquids whose temperature does not exceed +100°C). The capacity of the trap is 0,98 l/s.

Diameter Capacity Load Weight
DN, mm l/s kg kg
50 300 0,98 1,56
 
Material of spare parts
Trap cartridge Body
   
polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
210 390 390 1,56 0,031941000

Documentation

Download data sheet: Drain body kit HL 53KV
Photo Draft
Photo Hutterer & Lechner waste and overflow assembly with ball-joint tub-trap, without visual parts, DN40/50 [Code number: HL 555N.0] Draft Hutterer & Lechner waste and overflow assembly with ball-joint tub-trap, without visual parts, DN40/50 [Code number: HL 555N.0]
Hutterer & Lechner waste and overflow assembly with ball-joint tub-trap, without visual parts, DN40/50 [Code number: HL 555N.0]
Details 		HL 555N.0 9 169 rub

Purpose of use:

  • For bathtubs

Main characteristics:

  • has a siphon and a ball-joint tub-trap;
  • 60 cm Bowden cable (material - stainless steel CrNi 18/10);
  • 8-13 mm hose connection;
  • type of outlet - horizontal (outlet 280° rotation, 10° tilt).

Material of the body: polypropylene.

There is a new system for fixing the rotating handle, as well as a new toothed rack mechanism for precise movement. The overflow hose is flexible, the gasket for the drain plate is double.

Diameter Capacity Material Weight
DN, mm l/s   kg
40/50 0,67 polypropylene 0,733

Documentation

Download example of product installation:  Waste and overflow assembly HL 555N.0

Photo Draft
Photo Hutterer & Lechner visual parts white for HL 555N [Code number: HL 555N.3] Draft Hutterer & Lechner visual parts white for HL 555N [Code number: HL 555N.3]
Hutterer & Lechner visual parts white for HL 555N [Code number: HL 555N.3]
Details 		HL 555N.3 7 024 rub

Application purposes:

  • For waste and overflow assembly

Characteristics:

  • White color

Material: MS - beschichtet

Weight: 0,305 kg
Photo Draft
Photo Hutterer & Lechner visual parts gold plated for HL555N.0 and HL555N.L.0 [Code number: HL 555N.4] Draft Hutterer & Lechner visual parts gold plated for HL555N.0 and HL555N.L.0 [Code number: HL 555N.4]
Hutterer & Lechner visual parts gold plated for HL555N.0 and HL555N.L.0 [Code number: HL 555N.4]
Details 		HL 555N.4 8 765 rub

Application purposes:

  • For waste and overflow assembly

Characteristics:

  • Gold-plated brass

Material: MS - beschichtet

Weight: 0,305 kg
Photo Draft
Photo Hutterer & Lechner waste and overflow assembly with integrated water feed 3/4', ball-joint tub-trap, visual parts solid brass, DN40/50 [Code number: HL 560N.2] Draft Hutterer & Lechner waste and overflow assembly with integrated water feed 3/4', ball-joint tub-trap, visual parts solid brass, DN40/50 [Code number: HL 560N.2]
Hutterer & Lechner waste and overflow assembly with integrated water feed 3/4', ball-joint tub-trap, visual parts solid brass, DN40/50 [Code number: HL 560N.2]
Details 		HL 560N.2 46 484 rub

Application area:

  • For bath

Characteristics:

  • Material: PP (visible parts are made of brass)
  • Size: DN40/50
  • Has a ball joint
  • Equipped with Bowden cable (length: 60 cm) which is made of CrNi 18/10 steel
  • Outlet horizontal (outlet 280° swivel, 10° tilt)
  • Mounting height: 107 mm

Capacity: 0.67 l/s

Product weight: 2.34 kg

Documentation

Download example of product installation:  Waste and overflow assembly HL 560N.2

Photo Draft
Photo Hutterer & Lechner waste and overflow assembly with integrated water feed 3/4', ball-joint tub-trap, visual parts white [Code number: HL 560N.3] Draft Hutterer & Lechner waste and overflow assembly with integrated water feed 3/4', ball-joint tub-trap, visual parts white [Code number: HL 560N.3]
Hutterer & Lechner waste and overflow assembly with integrated water feed 3/4', ball-joint tub-trap, visual parts white [Code number: HL 560N.3]
Details 		HL 560N.3 43 301 rub

Application area:

  • For bath

Characteristics:

  • Material: PP (visible parts are made of brass and painted white)
  • Size: DN40/50
  • Has a ball joint
  • Equipped with Bowden cable (length: 60 cm)
  • Inlet type: horizontal (outlet 280° turn, 10° tilt)
  • There is a fitting that allows you to connect a drain tube

Capacity: 0.67 l/s.

Product weight: 2.34 kg.

Documentation

Download example of product installation:  Waste and overflow assembly HL 560N.3

Photo Draft
Photo Hutterer & Lechner FlexBox - flat shower trap [Code number: HL 570] Draft Hutterer & Lechner FlexBox - flat shower trap [Code number: HL 570]
Hutterer & Lechner FlexBox - flat shower trap [Code number: HL 570]
Details 		HL 570 23 664 rub

HL 570 - trap for flat shower tray with diameter 90 mm. Equipped with cover size d 113 mm. Horizontal outlet.

Diameter Capacity Load Weight
DN, mm l/s kg kg
40/50 300 0.50 1.607
 
Material of spare parts
Grate Trap cartridge Compression flange Body
       
stainless steel polypropylene thermoplastic elastomer polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
300 300 240 1,607 0,021600000

Documentation

Download data sheet: Flat shower trap HL 570

Download example of product installation:  Flat shower trap HL 570

© Inrusstrade.ru 1999-2026. "Inrusstrade" Ltd. Copying and quoting is prohibited