Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
Crosses are used to create two branches (in some cases three) from the main pipeline.
Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
Reducers are used to connect sewer pipes with different diameters.
Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
Siphons are mounted with sanitary equipment.
Brackets allow you to rigidly fix the pipeline system.
Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.

Photo Name Article Price

Hutterer & Lechner waste and overflow assembly with integrated water feed 3/4', ball-joint tub-trap, visual parts white [Code number: HL 560N.3]

Details

HL 560N.3

38 887 rub

Application area:

For bath

Characteristics:

Material: PP (visible parts are made of brass and painted white)
Size: DN40/50
Has a ball joint
Equipped with Bowden cable (length: 60 cm)
Inlet type: horizontal (outlet 280° turn, 10° tilt)
There is a fitting that allows you to connect a drain tube

Capacity: 0.67 l/s.

Product weight: 2.34 kg.

Hutterer & Lechner FlexBox - flat shower trap [Code number: HL 570]

Details

HL 570

21 252 rub

SINIKON Standart Cap, PP, d - 32 [Code number: KO.032]

Details

KO.032

Application purposes:

For domestic drainage system
For plugging dead-end sections of pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

Smooth inner surface
Corrosion resistance
Tightness of connections
Frost resistance
Low weight
Economy
Easy installation
Lifetime at least 50 years

d	L	Weight	Colour
mm	mm	kg
32	28	0,005	Gray

Photo SINIKON Standart Bend universal, PP, gray, d - 50 (Aquer) [Code number: KU.050.G]

1 2

SINIKON Standart Bend universal, PP, gray, d - 50 (Aquer) [Code number: KU.050.G]

Details

KU.050.G

150 rub

Application purposes:

For domestic drainage system
For changing direction of the pipeline

Material: Polypropylene (PP)

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

Smooth inner surface
Corrosion resistance
Tightness of connections
Frost resistance
Low weight
Economy
Easy installation
Lifetime at least 50 years

d	Colour
mm
50	Gray

Photo SINIKON Standart Bend universal, PP, gray, d - 110 (Aquer) [Code number: KU.110.G]

1 2

SINIKON Standart Bend universal, PP, gray, d - 110 (Aquer) [Code number: KU.110.G]

Details

KU.110.G

368 rub

Application purposes:

For domestic drainage system
For changing direction of the pipeline

Material: Polypropylene (PP)

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

Smooth inner surface
Corrosion resistance
Tightness of connections
Frost resistance
Low weight
Economy
Easy installation
Lifetime at least 50 years

d	Colour
mm
110	Gray

(REMOVED FROM PRODUCTION) - SINIKON Standart Bend 45° for WC, PP, black seal, d - 110 [Code number: PU.110045.B.R]

Details

PU.110045.B.R

Application purposes:

For WC
For domestic drainage system
For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

Smooth inner surface
Corrosion resistance
Tightness of connections
Frost resistance
Low weight
Economy
Easy installation
Lifetime at least 50 years

d	Angle	Weight	Colour of seal
mm		kg
110	45°	0,259	black

SINIKON Standart Bend 45° for WC, PP, white seal, d - 110 [Code number: PU.110045.W.R]

Details

PU.110045.W.R

330 rub

Application purposes:

For WC
For domestic drainage system
For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

Smooth inner surface
Corrosion resistance
Tightness of connections
Frost resistance
Low weight
Economy
Easy installation
Lifetime at least 50 years

d	Angle	Weight	Colour of seal
mm		kg
110	45°	0,259	white

(REMOVED FROM PRODUCTION) - SINIKON Standart Bend 90° for WC, PP, black seal, d - 110 [Code number: PU.110090.B.R]

Details

PU.110090.B.R

REMOVED FROM PRODUCTION

Application purposes:

For WC
For domestic drainage system
For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

Smooth inner surface
Corrosion resistance
Tightness of connections
Frost resistance
Low weight
Economy
Easy installation
Lifetime at least 50 years

d	Angle	Weight	Colour of seal
mm		kg
110	90°	0,332	black

SINIKON Standart Bend 90° for WC, PP, white seal, d - 110 [Code number: PU.110090.W.R]

Details

PU.110090.W.R

423 rub

Application purposes:

For WC
For domestic drainage system
For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

Smooth inner surface
Corrosion resistance
Tightness of connections
Frost resistance
Low weight
Economy
Easy installation
Lifetime at least 50 years

d	Angle	Weight	Colour of seal
mm		kg
110	90°	0,332	white

SINIKON Standart Rubber reduction, white, d - 32*25 (Aquer) [Code number: RG.32.25]

Details

RG.32.25

60 rub

Application purposes:

For domestic drainage system

Material: rubber

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

Corrosion resistance
Tightness of connections
Frost resistance
Low weight
Economy
Easy installation
Lifetime at least 50 years

d	d2
mm	mm
32	25

SINIKON Standart Rubber reduction, white, d - 40*25 (Aquer) [Code number: RG.40.25]

Details

RG.40.25

71 rub

Application purposes:

For domestic drainage system

Material: rubber

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

Corrosion resistance
Tightness of connections
Frost resistance
Low weight
Economy
Easy installation
Lifetime at least 50 years

d	d2
mm	mm
40	25

SINIKON Standart Rubber reduction, white, d - 40*32 (Aquer) [Code number: RG.40.32]

Details

RG.40.32

71 rub

Application purposes:

For domestic drainage system

Material: rubber

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

Corrosion resistance
Tightness of connections
Frost resistance
Low weight
Economy
Easy installation
Lifetime at least 50 years

d	d2
mm	mm
40	32

SINIKON Standart Reducer, rubber, d - 50*25 (Aquer) [Code number: RG.50.25]

Details

RG.50.25

77 rub

Application purposes:

For domestic drainage system

Material: rubber

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

Corrosion resistance
Tightness of connections
Frost resistance
Low weight
Economy
Easy installation
Lifetime at least 50 years

d	d2
mm	mm
50	25

SINIKON Standart Reducer, rubber, d - 50*32 (Aquer) [Code number: RG.50.32]

Details

RG.50.32

77 rub

Application purposes:

For domestic drainage system

Material: rubber

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

Corrosion resistance
Tightness of connections
Frost resistance
Low weight
Economy
Easy installation
Lifetime at least 50 years

d	d2
mm	mm
50	32

SINIKON Standart Rubber reduction, white, d - 50*40 (Aquer) [Code number: RG.50.40]

Details

RG.50.40

77 rub

Application purposes:

For domestic drainage system

Material: rubber

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

Corrosion resistance
Tightness of connections
Frost resistance
Low weight
Economy
Easy installation
Lifetime at least 50 years

d	d2
mm	mm
50	40

SINIKON Standart Rubber reduction, white, d - 56*32 (Aquer) (price on request) [Code number: RG.56.32]

Details

RG.56.32

Application purposes:

For domestic drainage system

Material: rubber

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

Corrosion resistance
Tightness of connections
Frost resistance
Low weight
Economy
Easy installation
Lifetime at least 50 years

d	d2
mm	mm
56	32

SINIKON Standart Rubber reduction, white, d - 56*40 (Aquer) (price on request) [Code number: RG.56.40]

Details

RG.56.40

Application purposes:

For domestic drainage system

Material: rubber

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

Corrosion resistance
Tightness of connections
Frost resistance
Low weight
Economy
Easy installation
Lifetime at least 50 years

d	d2
mm	mm
56	40

SINIKON Standart Eccentric reducer 90°, corner, PP, white, d - 50*32 [Code number: RP.P.050.032]

Details

RP.P.050.032

78 rub

Application purposes:

For domestic drainage system
For connecting pipes with different diameters

Material: Polypropylene (PP)

Warranty: 20 years

Type: angular.

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

Smooth inner surface
Corrosion resistance
Tightness of connections
Frost resistance
Low weight
Economy
Easy installation
Lifetime at least 50 years

d	d2	Colour
mm	mm
50	32	White/Gray

Wavin PVC Pressure Pipe systems T-piece flared, d - 63*63*63 [Code number: RRS010063 / 20134009]

Details

RRS010063

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

For pressure drainage systems

Description

Wavin T-piece flared can be used for installation of pressure piping systems. It is used to combine two branches of the pipeline into one flow. You can see the appearance of T-piece flared and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

Ease of elements;
High resistance to corrosion;
Excellent hydraulic performance;
High strength;
Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

D1	D3	B1	Z1	B3	Z3
mm	mm	mm	mm	mm	mm
63-63-63	-	96	41	-	-

Wavin PVC Pressure Pipe systems T-piece flared, d - 75*63*75 [Code number: RRS010074 / 20137009]

Details

RRS010074

ATTENTION! This product is temporarily unavailable for order!

D1	D3	B1	Z1	B3	Z3
mm	mm	mm	mm	mm	mm
75-63-75	63	102	48	96	48