Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
Crosses are used to create two branches (in some cases three) from the main pipeline.
Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
Reducers are used to connect sewer pipes with different diameters.
Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
Siphons are mounted with sanitary equipment.
Brackets allow you to rigidly fix the pipeline system.
Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.

Photo Name Article Price

Hutterer & Lechner Shower trap for waste holes d 60 mm, with ball-joint, horizontal, DN40/50 x 80 mm [Code number: HL 514/SN-80]

Details

HL 514/SN-80

3 201 rub

HL 514/SN-80 shower trap DN40/50x80 horizontal is designed for shower trays and is equipped with ball-joint. The HL Company for manufacturing HL 514 / SN-80 uses polypropylene. Capacity of the trap is 0.55 l/s. Diameter of waste holes is 60 mm. Trap is equipped with a stainless steel-coverplate d 86 mm. Trap is self-cleaning, and coverplate can be colored or covered with metal.

Diameter	Capacity	Material	Weight
DN, mm	l/s		gr
40/50	0,55	polypropylene	335

Hutterer & Lechner Shower trap for waste holes 1 1/2', with ball-joint, hose connector 8 - 13 mm, horizontal, DN40/50 x 1 1/2' [Code number: HL 514/SNV]

Details

HL 514/SNV

4 537 rub

HL 514/SNV shower trap DN40/50x1 1/2' horizontal is designed for shower trays and is equipped with ball-joint. The HL Company for manufacturing HL 514/SNV uses polypropylene. Capacity is 0.55 l/s. Diameter of waste holes is 1 1/2'. Trap is equipped with a stainless steel-coverplate d 86 mm and hose connector 8 - 13 mm. Trap is self-cleaning, and coverplate can be colored or covered with metal.

Diameter	Capacity	Material	Weight
DN, mm	l/s		gr
40/50	0,55	polypropylene	335

Hutterer & Lechner shower trap with ball-joint and hose connector 8-13mm, DN40/50 [Code number: HL 514/SNV.0]

Details

HL 514/SNV.0

4 366 rub

HL 514 / SNV.0 is a shower trap which is installed in shower trays and equipped with ball-joint. The shower trap is horizontal, drain hole 6/4", there is hose connector 8 - 13 mm (for a steam shower). Comes with function lot cover / assembling tool.

Diameter	Capacity	Material	Weight
DN, mm	l/s		kg
40/50	0,48	PP/PE	0,335

Hutterer & Lechner shower trap with ball-joint and hose connector 9-12 mm [Code number: HL 514/SNV-80]

Details

HL 514/SNV-80

4 537 rub

HL 514/SNV-80 is a shower trap which is installed in shower trays and equipped with ball-joint. The shower trap is horizontal, drain hole 6/4", there is hose connector 9-12 mm (for a steam shower).

Diameter	Capacity	Material	Weight
DN, mm	l/s		kg
40/50	0,48	PP/PE	0,335

Hutterer & Lechner Shower trap for waste holes d 90mm, with coverplate d 113mm, with ball-joint, DN50 [Code number: HL 520]

Details

HL 520

9 027 rub

HL 520 Shower trap DN50 is intended for installation in a shower tray and is equipped with a waste hole d 90mm and cleanable hair strainer. Also shower trap is equipped with a removable sifon. Stainless steel cover plate 112 mm can paint in different colors. Capacity is 0,90 l/s.

Diameter	Capacity	Material	Weight
DN, mm	l/s		gr
50	0,90	polypropylene	530

Hutterer & Lechner Shower trap for shower trays with waste holes d 90mm, without cover plate, DN50 [Code number: HL 520.0]

Details

HL 520.0

4 486 rub

HL 520.0 Shower trap DN50 is intended for installation in a shower tray and is equipped with a waste hole d 90mm and cleanable hair strainer, but without cover plate. Also shower trap is equipped with a removable sifon and ball-joint. Capacity is 0,90 l/s.

Diameter	Capacity	Material	Weight
DN, mm	l/s		gr
50	0,90	polypropylene	370

Hutterer & Lechner Flat shower trap for waste holes d 90mm, with stainless steel coverplate d 113mm, with ball-joint, DN40/50 [Code number: HL 520F]

Details

HL 520F

9 027 rub

Flat shower trap HL 520F has a low mounting height. The diameter of the drain hole is 90 mm. There is a hair strainer, a removable trap seal cartridge and a stainless steel cover DN 112 mm.

Diameter	Material	Capacity	Weight
DN, mm		l/s	gr
40/50	PP, outlet - PE	horizontal - 0,6 vertical - 0,8	530

Hutterer & Lechner Flat shower trap with ball-joint for waste holes d 90mm [Code number: HL 520F.0]

Details

HL 520F.0

4 722 rub

HL 520F.0 is a shower trap which is installed in shower trays. The shower trap is horizontal, drain hole d 90 mm.

Diameter	Material	Weight
DN, mm		kg
50	PP/PE	0,37

Hutterer & Lechner Siphon for shower tray flat, with ball-joint outlet for hole d 90mm, Q=0,42 l/s, DN 40 [Code number: HL 521]

Details

HL 521

10 019 rub

HL 521 is a shower trap which is installed in shower trays and equipped with ball-joint. The shower trap is flat, drain hole d 90 mm. Trap can be removed, there is stainless steel cover plate d 113 mm also. Mounting height is 60 mm.

Diameter	Capacity	Material	Weight
DN, mm	l/s		kg
40	0,42	PP/PE	0,41

Hutterer & Lechner Shower trap for waste holes d 90mm and with stainless steel-coverplate d 113mm, ball-joint, DN40/50 [Code number: HL 522]

Details

HL 522

9 501 rub

HL 522 Shower trap DN40/50 is intended for installation in a shower tray and is equipped with a waste hole d 90mm and ball-joint for horizontal or vertical use. Also shower trap is equipped with a removable trap seal insert. Stainless steel coverplate 113 mm can paint in different colors. Capacity is 0,50 l/s. Mounting height is 83 mm.

Diameter	Capacity	Material	Weight
DN, mm	l/s		gr
40/50	0,50	polypropylene	550

Hutterer & Lechner Shower trap body for waste holes d 90mm, with ball-joint, DN40/50 [Code number: HL 522.0]

Details

HL 522.0

4 722 rub

HL 522.0 Shower trap body DN40/50 is intended for installation in a shower tray and is equipped with a waste hole d 90mm and ball-joint for horizontal or vertical use. Also shower trap is equipped with a removable trap seal insert. Capacity is 0,50 l/s. Mounting height is 83 mm.

Diameter	Capacity	Material	Weight
DN, mm	l/s		gr
40/50	0,50	polypropylene	403

Hutterer Lechner Outlet for shower gutter HL 50FV.0 [Code number HL 522856]

Details

HL 522856

14 124 rub

Hutterer & Lechner Shower drain with grate frame 121 x 121 mm, for prefabricated shower floors, ball-joint, DN40/50 [Code number: HL 522KE]

Details

HL 522KE

11 364 rub

Hutterer & Lechner Shower drain with grate frame 121 x 121 mm, for prefabricated shower floors (H=30-50mm), ball-joint, DN40/50 [Code number: HL 522KE.XL]

Details

HL 522KE.XL

11 364 rub

Hutterer & Lechner Shower drain with grate frame 121 x 121 mm, for prefabricated shower floors (H=30-50mm), ball-joint, DN40/50 [Code number: HL 522KE.XL.0]

Details

HL 522KE.XL.0

9 062 rub

Hutterer & Lechner Shower trap for waste holes d 90 mm, ball-joint, DN40/50 [Code number: HL 522V]

Details

HL 522V

11 202 rub

HL 522V Shower trap DN40/50 is intended for installation in a shower tray and is equipped with a waste hole d 90mm and ball-joint for horizontal or vertical use. Also shower trap is equipped with a removable trap seal insert and trapped hose connector 8 - 13 mm. Shower trap is made of polypropylene, it weighs 565 grams. Capacity is 0,50 l/s. Mounting height is 83 mm. Stainless steel coverplate 112 mm can paint in different colors.

Diameter	Capacity	Material	Weight
DN, mm	l/s		gr
40/50	0,50	polypropylene	565

Hutterer & Lechner Prefabricated shower floor with siphon, 110 x 90 cm complete [Code number: HL 523N-110*90]

Details

HL 523N-110*90

75 067 rub

The HL Company produces prefabricated shower floor HL 523N-110*90. Include:
- Protection plate 110x90 cm with gravity layer. Plate is made of EPS;
- Shower trap DN50 with ball-joint, adjustable from vertical to horizontal;
- Siphon;
- Mounting plug;
- Stainless steel grate 115 x 115 mm and chromed frame 121 x 121 mm.
Application purpose: for shower trays.

Capacity	Diameter	Size of plate	Weight
l/s	DN mm	mm	gr
0,65	50	1100x900

Hutterer & Lechner Shower trap with integrated telescopic stand-pipe 0 - 70 mm, horizontal, DN50/40 x 75 mm [Code number: HL 524]

Details

HL 524

5 821 rub

Application area:

For shower trays

Characteristics:

Material: PP
Dimension: DN50
capacity: 0,8 l/s
installation height: 85 mm
grate: Plate d 75mm chrome-plated

Weight: 0,321 kg

Packaging data (PE-bag)

Height	Width	Depth	Weight	Volume
mm	mm	mm	kg	m3
80	120	240	0,325	0,002304000

Hutterer & Lechner hair stop, 5/4" [Code number: HL 525]

Details

HL 525

206 rub

Characteristics of HL sewage equipment:

Complies with ISO 9001
Safety for ecology and health
Products undergo laboratory testing
Durability
Attractive appearance

Size: 5/4"

Weight: 0,012 kg/pc

Hutterer & Lechner Floor drain body, adjustable 0-15° horizontal, with ball joint outlet DN50 [Code number: HL 52K]

Details

HL 52K

49 417 rub

Floor drain body is made of polymer with sound disconnected adjusting screws, with fitting for grates, with fiber glass textile and removable sifon, with ball joint outlet DN50, adjustable 0-15° horizontal.

Diameter	Capacity	Load	Weight
DN, mm	l/s	kg	gr
50			3970

Material of spare parts

Gutter	Drain	Trap body

stainless steel polymer	polypropylene	polypropylene