Fittings for domestic sewerage

Characteristics of HL sewage equipment:

• Complies with ISO 9001
• Safety for ecology and health
• Products undergo laboratory testing
• Durability
• Attractive appearance

Size: 5/4"

Weight: 0,012 kg/pc

Floor drain body is made of polymer with sound disconnected adjusting screws, with fitting for grates, with fiber glass textile and removable sifon, with ball joint outlet DN50, adjustable 0-15° horizontal.

The HL 530 mounting block with an integrated drain. This product is designed for wall-mounted installation and provides linear drainage from floor level. It is used in showers with a concrete structure. The drain, integrated into the mounting plate, can be used to drain wastewater with temperatures below 85°C. The height of the extension can be adjusted by trimming it during installation. The drain body, integrated into the mounting plate, can be rotated 180° if necessary. The dimensions of the block are 1200 x 256 x 115 mm. It is supplied without a grate or subframe.

Application purpose:

• For waste disposal

Characteristics:

• the height of the shower tray is 79 mm;
• built into the mounting element, which is made of extruded polystyrene EPS-40 (size 1200x200x79 mm);
• there is a subframe (size 499x80x13 mm), as well as a grate (size 480x50 mm) made of stainless steel;
• the surface of the mounting casing is covered with Montaplast waterproofing sheet;
• suitable for wall mounting;
• the length is adjusted to the desired trimming (no more than 600 mm);
• element HL531V is used to extend the tray;
• the slope to the wall is 3°;
• it is possible to use wall tiles (thickness with tile adhesive no more than 17 mm) or floor tiles (thickness with tile adhesive no more than 28 mm);
• the drain is equipped with a dry siphon "Primus" (water seal height 25 mm);
• warranty period: 1 year;
• service life: 50 years.

Dimensions and components

Technical characteristics

Shower channel HL 531.0 is integrated in an EPS-installation block. Waterproof, fleece-laminated surface with 3% incline. For direct tiling. You can fine-tune of shower channel. Channel is equipped with PRIMUS-trap - this device allows you forget about the unpleasant smell of sewage. Another important advantage of the shower channel is its capacity - 0.6 l/s. For near-wall installation. Including lot cover, but without stainless steel cover.

Shower channel HL 531.0/18 is integrated in an EPS-installation block. It is also equipped with stainless steel frame, but without cover. Waterproof, fleece-laminated surface with 3% incline. For direct tiling. You can fine-tune of shower channel. Channel is equipped with PRIMUS-trap - this device allows you forget about the unpleasant smell of sewage. Another important advantage of the shower channel is its capacity - 0.6 l/s. For near-wall installation. Including lot cover..

Shower channel HL 531.0/23 is integrated in an EPS-installation block. It is also equipped with stainless steel frame, but without cover. Waterproof, fleece-laminated surface with 3% incline. For direct tiling. You can fine-tune of shower channel. Channel is equipped with PRIMUS-trap - this device allows you forget about the unpleasant smell of sewage. Another important advantage of the shower channel is its capacity - 0.6 l/s. For near-wall installation. Including lot cover..

Shower channel HL 531.0/28 is integrated in an EPS-installation block. It is also equipped with stainless steel frame, but without cover. Waterproof, fleece-laminated surface with 3% incline. For direct tiling. You can fine-tune of shower channel. Channel is equipped with PRIMUS-trap - this device allows you forget about the unpleasant smell of sewage. Another important advantage of the shower channel is its capacity - 0.6 l/s. For near-wall installation. Including lot cover..

Shower channel HL 531/18 is integrated in an EPS-installation block. It is also equipped with stainless steel frame. Waterproof, fleece-laminated surface with 3% incline. For direct tiling. You can fine-tune of shower channel. Channel is equipped with PRIMUS-trap - this device allows you forget about the unpleasant smell of sewage. Another important advantage of the shower channel is its capacity - 0.6 l/s. For near-wall installation. Including lot cover..

Shower channel HL 531/23 is integrated in an EPS-installation block. It is also equipped with stainless steel frame. Waterproof, fleece-laminated surface with 3% incline. For direct tiling. You can fine-tune of shower channel. Channel is equipped with PRIMUS-trap - this device allows you forget about the unpleasant smell of sewage. Another important advantage of the shower channel is its capacity - 0.6 l/s. For near-wall installation. Including lot cover..

Shower channel HL 531/28 is integrated in an EPS-installation block. It is also equipped with stainless steel frame. Waterproof, fleece-laminated surface with 3% incline. For direct tiling. You can fine-tune of shower channel. Channel is equipped with PRIMUS-trap - this device allows you forget about the unpleasant smell of sewage. Another important advantage of the shower channel is its capacity - 0.6 l/s. For near-wall installation. Including lot cover..

Application area:

• For barriere-free showers

Characteristics:

• Material: EPS - 20
• Dimension: 1200 x 185 mm
• installation height: 20 mm

Weight: 0,196 kg

Drain body InFloor, outlet DN50 horizontal, polypropylene, with ball-joint, adjustable 0-15 degrees.

Documentation

Download data sheet: Drain body kit HL 53K

HL 53K.2 - drain body for flat slot shower channel. Guaranteed service life is 50 years (with correct operation of the device, in particular when draining liquids whose temperature does not exceed +100°C). The capacity of the trap is 1,45 l/s.

Documentation

Download data sheet: Drain body kit HL 53K.2

HL 53KC - drain body for flat slot shower channel. Guaranteed service life is 50 years (with correct operation of the device, in particular when draining liquids whose temperature does not exceed +100°C). The capacity of the trap is 0,80 l/s.

Documentation

Download data sheet: Drain body kit HL 53KFC

Drain body InFloor, outlet DN40 horizontal, polypropylene, with ball-joint, adjustable 0-15 degrees.

Documentation

Download data sheet: Drain body kit HL 53KF

HL 53KFC - drain body for flat slot shower channel. Guaranteed service life is 50 years (with correct operation of the device, in particular when draining liquids whose temperature does not exceed +100°C). The capacity of the trap is 0.40 l/s.

Documentation

Download data sheet: Drain body kit HL 53KFC

HL 53KV - drain body for flat slot shower channel. Guaranteed service life is 50 years (with correct operation of the device, in particular when draining liquids whose temperature does not exceed +100°C). The capacity of the trap is 0,98 l/s.

Documentation

Download data sheet: Drain body kit HL 53KV

Purpose of use:

• For bathtubs

Main characteristics:

• has a siphon and a ball-joint tub-trap;
• 60 cm Bowden cable (material - stainless steel CrNi 18/10);
• 8-13 mm hose connection;
• type of outlet - horizontal (outlet 280° rotation, 10° tilt).

Material of the body: polypropylene.

There is a new system for fixing the rotating handle, as well as a new toothed rack mechanism for precise movement. The overflow hose is flexible, the gasket for the drain plate is double.

Documentation

Download example of product installation:  Waste and overflow assembly HL 555N.0