Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Leninsky urban district

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Наименование Article Цена
Photo Draft
Photo Hutterer & Lechner Flat stainless steel shower channel with removable siphon cartridge(h = 24 mm), without cover, horizontal, length 1200 mm, DN 50 [Code number: HL 50WU.0/120] Draft Hutterer & Lechner Flat stainless steel shower channel with removable siphon cartridge(h = 24 mm), without cover, horizontal, length 1200 mm, DN 50 [Code number: HL 50WU.0/120]
Hutterer & Lechner Flat stainless steel shower channel with removable siphon cartridge(h = 24 mm), without cover, horizontal, length 1200 mm, DN 50 [Code number: HL 50WU.0/120]
Details 		HL 50WU.0/120 105 664 rub

Stainless steel shower gutter HL 50WU.0/120 to be connected to the wall, and it allows a linear diversion of wastewater from showers. It is mounted to pipes with a diameter of 50 mm, and shower gutter is equipped with a ball joint for ease of connection to drainage pipe. PP drain with horizontal outlet. Shower gutter supplies with adjustment screws. Length of shower gutter is 1200 mm.

Diameter Size, mm Capacity Load Weight
DN, mm L H min l/s kg kg
50 1200 68 0,46 300 4.863
 
Material of spare parts
Trap body Drain
   
stainless steel / polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1450 4,863 0,049626250

Documentation

Download data sheet: Shower gutter HL 50WU.0/120

Download example of product installation:  Flat shower channel HL 50WU.0/120

Photo Draft
Photo Hutterer & Lechner Extremly flat shower channel for installation near the wall, drain (h = 24 mm), without cover, horizontal, 1500 mm, DN 50 [Code number: HL 50WU.0/150] Photo Hutterer & Lechner Extremly flat shower channel for installation near the wall, drain (h = 24 mm), without cover, horizontal, 1500 mm, DN 50 [Code number: HL 50WU.0/150] Draft Hutterer & Lechner Extremly flat shower channel for installation near the wall, drain (h = 24 mm), without cover, horizontal, 1500 mm, DN 50 [Code number: HL 50WU.0/150]
Hutterer & Lechner Extremly flat shower channel for installation near the wall, drain (h = 24 mm), without cover, horizontal, 1500 mm, DN 50 [Code number: HL 50WU.0/150]
Details 		HL 50WU.0/150 188 773 rub

The HL Company produces a shower channel HL 50WU.0/150 with length of 1500 mm and capacity of 0.82 l/s. Shower channel cfor installation near the wall has a lowered height - it is only 68 mm. Consisting of channel body with sanded flange for thin-bed waterproofings. 2 PP drains DN50 horizontal with removable trap 24 mm. This shower channel can be used only in low-rise building.

Diameter Size, mm LY Capacity Load Weight
DN, mm L H min mm l/s kg gr
50 1500 68 500 0,82 300 6480
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 7,06 0,0513375

Documentation

Download data sheet: Shower gutter HL 50WU.0/150

Download the installation instructions of product: Extremly flat shower channel HL 50WU.0/150
Photo Draft
Photo Hutterer & Lechner Flat stainless steel shower channel with removable siphon cartridge h = 24 mm, horizontal, length 1600 mm, without cover, DN 50 [Code number: HL 50WU.0/160] Draft Hutterer & Lechner Flat stainless steel shower channel with removable siphon cartridge h = 24 mm, horizontal, length 1600 mm, without cover, DN 50 [Code number: HL 50WU.0/160]
Hutterer & Lechner Flat stainless steel shower channel with removable siphon cartridge h = 24 mm, horizontal, length 1600 mm, without cover, DN 50 [Code number: HL 50WU.0/160]
Details 		HL 50WU.0/160 192 656 rub

Extremly flat stainless steel shower channel HL 50WU.0/160 is angled and it is designed for wall mounting, has a reduced height - only 68 mm. Consisting of channel body with sanded flange for thin-bed waterproofings. The outlet is horizontal, the trap is removed. The height of the trap is 24 mm. This shower tray can be used in low-rise buildings only.

Diameter Size, mm Capacity Load Weight
DN, mm L H min l/s kg kg/pc
50 1600 68-238 0,82 300 7.37
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 2100 7,37 0,071872500

Documentation

Download data sheet: Shower gutter HL 50WU.0/160

Download example of product installation:  Flat shower channel HL 50WU.0/160

Photo Draft
Photo Hutterer & Lechner Flat stainless steel shower channel with removable siphon cartridge h = 24 mm, horizontal, length 1700 mm, without cover, DN 50 [Code number: HL 50WU.0/170] Draft Hutterer & Lechner Flat stainless steel shower channel with removable siphon cartridge h = 24 mm, horizontal, length 1700 mm, without cover, DN 50 [Code number: HL 50WU.0/170]
Hutterer & Lechner Flat stainless steel shower channel with removable siphon cartridge h = 24 mm, horizontal, length 1700 mm, without cover, DN 50 [Code number: HL 50WU.0/170]
Details 		HL 50WU.0/170 196 465 rub

Extremly flat stainless steel shower channel HL 50WU.0/170 is angled and it is designed for wall mounting, has a reduced height - only 68 mm. Consisting of channel body with sanded flange for thin-bed waterproofings. The outlet is horizontal, the trap is removed. The height of the trap is 24 mm. This shower tray can be used in low-rise buildings only.

Diameter Size, mm Capacity Load Weight
DN, mm L H min l/s kg kg/pc
50 1700 68-238 0,82 300 7.613
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 2100 7,613 0,071872500

Documentation

Download data sheet: Shower gutter HL 50WU.0/170

Download example of product installation:  Flat shower channel HL 50WU.0/170

Photo Draft
Photo Hutterer & Lechner Extremly flat stainless steel shower channel for installation near the wall incl. drain, fixing material and lot cover, but without cover, horizontal, Installation length 1900mm, DN 50 [Code number: HL 50WU.0/190] Draft Hutterer & Lechner Extremly flat stainless steel shower channel for installation near the wall incl. drain, fixing material and lot cover, but without cover, horizontal, Installation length 1900mm, DN 50 [Code number: HL 50WU.0/190]
Hutterer & Lechner Extremly flat stainless steel shower channel for installation near the wall incl. drain, fixing material and lot cover, but without cover, horizontal, Installation length 1900mm, DN 50 [Code number: HL 50WU.0/190]
Details 		HL 50WU.0/190 204 009 rub
Diameter Size, mm Capacity Load Weight
DN, mm L H min l/s kg kg/pc
50 1900 68-128 0,82 300 5,932
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 8,185 0,0513375

Documentation

Download data sheet: Shower gutter HL 50WU.0/190

Download the installation instructions of product: Extremly flat shower channel HL 50WU.0/190
Photo Draft
Photo Hutterer & Lechner Extremly flat shower channel for installation near the wall incl. drain (h = 24 mm), without cover, horizontal, 2000 mm, DN 50 [Code number: HL 50WU.0/200] Photo Hutterer & Lechner Extremly flat shower channel for installation near the wall incl. drain (h = 24 mm), without cover, horizontal, 2000 mm, DN 50 [Code number: HL 50WU.0/200] Draft Hutterer & Lechner Extremly flat shower channel for installation near the wall incl. drain (h = 24 mm), without cover, horizontal, 2000 mm, DN 50 [Code number: HL 50WU.0/200]
Hutterer & Lechner Extremly flat shower channel for installation near the wall incl. drain (h = 24 mm), without cover, horizontal, 2000 mm, DN 50 [Code number: HL 50WU.0/200]
Details 		HL 50WU.0/200 207 785 rub

The HL Company produces a shower channel HL 50WU.0/200 with length of 2000 mm and capacity of 0.82 l/s. Shower channel cfor installation near the wall has a lowered height - it is only 68 mm. Consisting of channel body with sanded flange for thin-bed waterproofings. 2 PP drains DN50 horizontal with removable trap 24 mm. This shower channel can be used only in low-rise building.

Diameter Size, mm LY Capacity Load Weight
DN, mm L H min mm l/s kg gr
50 2000 68 800 0,82 300 7920
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 8,535 0,0513375

Documentation

Download data sheet: Shower gutter HL 50WU.0/200

Download the installation instructions of product: Extremly flat shower channel HL 50WU.0/200
Photo Draft
Photo Hutterer & Lechner Extremly flat stainless steel shower channel for installation near the wall, with removable trap h = 24 mm, without cover, horizontal, length 2100 mm, DN 50 [Code number: HL 50WU.0/210] Photo Hutterer & Lechner Extremly flat stainless steel shower channel for installation near the wall, with removable trap h = 24 mm, without cover, horizontal, length 2100 mm, DN 50 [Code number: HL 50WU.0/210] Draft Hutterer & Lechner Extremly flat stainless steel shower channel for installation near the wall, with removable trap h = 24 mm, without cover, horizontal, length 2100 mm, DN 50 [Code number: HL 50WU.0/210]
Hutterer & Lechner Extremly flat stainless steel shower channel for installation near the wall, with removable trap h = 24 mm, without cover, horizontal, length 2100 mm, DN 50 [Code number: HL 50WU.0/210]
Details 		HL 50WU.0/210 211 509 rub

Extremly flat stainless steel shower channel HL 50WU.0/210 is angled and it is designed for wall mounting, has a reduced height - only 68 mm. Consisting of channel body with sanded flange for thin-bed waterproofings. The outlet is horizontal, the trap is removed. The height of the trap is 24 mm. This shower tray can be used in low-rise buildings only.

Diameter Size, mm Capacity Load Weight
DN, mm L H min l/s kg kg/pc
50 2100 68-128 0,82 300 6,191
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 8,672 0,0513375

Documentation

Download data sheet: Shower gutter HL 50WU.0/210

Download the installation instructions of product: Extremly flat shower channel HL 50WU.0/210
Photo Draft
Photo Hutterer & Lechner Extremly flat shower channel for installation near the wall incl. drain (h = 24 mm), without cover, horizontal, 600 mm, DN 50 [Code number: HL 50WU.0/60] Photo Hutterer & Lechner Extremly flat shower channel for installation near the wall incl. drain (h = 24 mm), without cover, horizontal, 600 mm, DN 50 [Code number: HL 50WU.0/60] Draft Hutterer & Lechner Extremly flat shower channel for installation near the wall incl. drain (h = 24 mm), without cover, horizontal, 600 mm, DN 50 [Code number: HL 50WU.0/60]
Hutterer & Lechner Extremly flat shower channel for installation near the wall incl. drain (h = 24 mm), without cover, horizontal, 600 mm, DN 50 [Code number: HL 50WU.0/60]
Details 		HL 50WU.0/60 90 828 rub

The HL Company produces a shower channel HL 50WU.0/60 with length of 600 mm and capacity of 0,46 l/s. Shower channel cfor installation near the wall has a lowered height - it is only 68 mm. Consisting of channel body with sanded flange for thin-bed waterproofings. PP drain DN50 horizontal with removable trap 24 mm. This shower channel can be used only in low-rise building.

Diameter Size, mm Capacity Load Weight
DN, mm L H min l/s kg gr
50 600 68 0,46 300 2409
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 2,757 0,0513375

Documentation

Download data sheet: Shower gutter HL 50WU.0/60

Download the installation instructions of product: Extremly flat shower channel HL 50WU.0/60
Photo Draft
Photo Hutterer & Lechner Extremly flat stainless steel shower channel for installation near the wall, with removable trap h = 24 mm, without cover, horizontal, length 700 mm, DN 50 [Code number: HL 50WU.0/70] Photo Hutterer & Lechner Extremly flat stainless steel shower channel for installation near the wall, with removable trap h = 24 mm, without cover, horizontal, length 700 mm, DN 50 [Code number: HL 50WU.0/70] Draft Hutterer & Lechner Extremly flat stainless steel shower channel for installation near the wall, with removable trap h = 24 mm, without cover, horizontal, length 700 mm, DN 50 [Code number: HL 50WU.0/70]
Hutterer & Lechner Extremly flat stainless steel shower channel for installation near the wall, with removable trap h = 24 mm, without cover, horizontal, length 700 mm, DN 50 [Code number: HL 50WU.0/70]
Details 		HL 50WU.0/70 92 098 rub

Extremly flat stainless steel shower channel HL 50WU.0/70 is angled and it is designed for wall mounting, has a reduced height - only 68 mm. Consisting of channel body with sanded flange for thin-bed waterproofings. The outlet is horizontal, the trap is removed. The height of the trap is 24 mm. This shower tray can be used in low-rise buildings only.

Diameter Size, mm Capacity Load
DN, mm L H min l/s kg
50 700 68-128 0,46 300
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 3,003 0,0513375

Documentation

Download data sheet: Shower gutter HL 50WU.0/70

Download the installation instructions of product: Extremly flat shower channel HL 50WU.0/70
Photo Draft
Photo Hutterer & Lechner Extremly flat stainless steel shower channel for installation near the wall with removable trap h = 24 mm, without cover, horizontal, length 800 mm, DN 50 [Code number: HL 50WU.0/80] Photo Hutterer & Lechner Extremly flat stainless steel shower channel for installation near the wall with removable trap h = 24 mm, without cover, horizontal, length 800 mm, DN 50 [Code number: HL 50WU.0/80] Draft Hutterer & Lechner Extremly flat stainless steel shower channel for installation near the wall with removable trap h = 24 mm, without cover, horizontal, length 800 mm, DN 50 [Code number: HL 50WU.0/80]
Hutterer & Lechner Extremly flat stainless steel shower channel for installation near the wall with removable trap h = 24 mm, without cover, horizontal, length 800 mm, DN 50 [Code number: HL 50WU.0/80]
Details 		HL 50WU.0/80 94 171 rub

Extremly flat stainless steel shower channel HL 50WU.0/80 is angled and it is designed for wall mounting, has a reduced height - only 68 mm. Consisting of channel body with sanded flange for thin-bed waterproofings. The outlet is horizontal, the trap is removed. The height of the trap is 24 mm. This shower tray can be used in low-rise buildings only.

Diameter Size, mm Capacity Load Weight
DN, mm L H min l/s kg kg/pc
50 800 68-128 0,46 300 2,868
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 3,313 0,0513375

Documentation

Download data sheet: Shower gutter HL 50WU.0/80

Download the installation instructions of product: Extremly flat shower channel HL 50WU.0/80
Photo Draft
Photo Hutterer & Lechner Extremly flat stainless steel shower channel for installation near the wall, with removable trap h = 24 mm, without cover, horizontal, length 900 mm, DN 50 [Code number: HL 50WU.0/90] Photo Hutterer & Lechner Extremly flat stainless steel shower channel for installation near the wall, with removable trap h = 24 mm, without cover, horizontal, length 900 mm, DN 50 [Code number: HL 50WU.0/90] Draft Hutterer & Lechner Extremly flat stainless steel shower channel for installation near the wall, with removable trap h = 24 mm, without cover, horizontal, length 900 mm, DN 50 [Code number: HL 50WU.0/90]
Hutterer & Lechner Extremly flat stainless steel shower channel for installation near the wall, with removable trap h = 24 mm, without cover, horizontal, length 900 mm, DN 50 [Code number: HL 50WU.0/90]
Details 		HL 50WU.0/90 98 174 rub

Extremly flat stainless steel shower channel HL 50WU.0/90 is angled and it is designed for wall mounting, has a reduced height - only 68 mm. Consisting of channel body with sanded flange for thin-bed waterproofings. The outlet is horizontal, the trap is removed. The height of the trap is 24 mm. This shower tray can be used in low-rise buildings only.

Diameter Size, mm Capacity Load Weight
DN, mm L H min l/s kg kg/pc
50 900 68-128 0,46 300 3,151
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 3,596 0,0513375

Documentation

Download data sheet: Shower gutter HL 50WU.0/90

Download the installation instructions of product: Extremly flat shower channel HL 50WU.0/90
Photo Draft
Photo Hutterer & Lechner Shower tray trap DN50 for shower trays with whole d 90 mm [Code number: HL 511] Draft Hutterer & Lechner Shower tray trap DN50 for shower trays with whole d 90 mm [Code number: HL 511]
Hutterer & Lechner Shower tray trap DN50 for shower trays with whole d 90 mm [Code number: HL 511]
Details 		HL 511 10 926 rub

Purpose of use:

  • For shower trays

Main characteristics:

  • outlet type - vertical;
  • for shower trays with a diameter of 90 mm.

Diameter: DN50.

Main advantages of HL siphons for shower trays:

  • self-cleaning ability;
  • made of high-quality raw materials;
  • easy and quick installation;
  • tightness of connections;
  • high throughput.
Photo Draft
Photo Hutterer & Lechner Shower tray trap DN50 for shower trays with whole d 90 mm, vertical [Code number: HL 511N] Draft Hutterer & Lechner Shower tray trap DN50 for shower trays with whole d 90 mm, vertical [Code number: HL 511N]
Hutterer & Lechner Shower tray trap DN50 for shower trays with whole d 90 mm, vertical [Code number: HL 511N]
Details 		HL 511N 10 924 rub

HL 511N Shower tray trap DN50 vertical is designed for mounting on shower trays. Shower tray trap has whole d 90 mm. The trap is equipped with a removable siphon cartridge and stainless steel cover d 112 mm. Weight of the trap is 300 grams and  capacity is 0,53 l/s. Siphon cartridge and trap body are made of polypropylene.

Diameter Capacity Weight
DN, mm l/s gr
50 0,53 300
 
Material of spare parts
Cover Siphon cartridge Body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
130 195 260 0,4 0,006591
Photo
Photo Hutterer & Lechner Shower trap for waste holes d 90 mm, with ball-joint, DN50 [Code number: HL 512]
Hutterer & Lechner Shower trap for waste holes d 90 mm, with ball-joint, DN50 [Code number: HL 512]
Details 		HL 512

Purpose of use:

  • For shower trays

Main characteristics:

  • type of outlet - horizontal / rotary joint;
  • for shower trays with a diameter of 90 mm.

Diameter: DN50.

Main advantages of HL siphons for shower trays:

  • self-cleaning ability;
  • made of high-quality raw materials;
  • simple and quick installation;
  • tightness of connections;
  • high throughput.
Photo Draft
Photo Hutterer & Lechner Shower trap with ball-joint, waste fitting 1 1/2', hair stop HL526 and plug, horizontal, DN40/50x1 1/2' [Code number: HL 514] Draft Hutterer & Lechner Shower trap with ball-joint, waste fitting 1 1/2', hair stop HL526 and plug, horizontal, DN40/50x1 1/2' [Code number: HL 514]
Hutterer & Lechner Shower trap with ball-joint, waste fitting 1 1/2', hair stop HL526 and plug, horizontal, DN40/50x1 1/2' [Code number: HL 514]
Details 		HL 514 3 565 rub

HL 514 shower trap DN40/50 x 1 1/2' horizontal is designed for shower trays. It is equipped with ball-joint, waste fitting 1 1/2' and hair stop 1 1/2' HL526. Trap is made of polypropylene, weight of trap is 275 g and capacity is 0,58 l/s. Trap is equipped with water seal with 50 mm high.

Diameter Capacity Material Weight
DN, mm l/s   gr
40/50 0,58 polypropylene 275

Documentation

Download example of product installation:  Shower trap HL 514

Photo
Photo Hutterer & Lechner shower trap with ball-joint, waste fitting 1 1/2', hair stop HL526 and plug, horizontal, DN40/50x80 mm [Code number: HL 514-80]
Hutterer & Lechner shower trap with ball-joint, waste fitting 1 1/2', hair stop HL526 and plug, horizontal, DN40/50x80 mm [Code number: HL 514-80]
Details 		HL 514-80 3 917 rub

HL 514-80 is a shower trap which is installed in shower trays and equipped with ball-joint. The shower trap is horizontal, drain hole d 80 mm for shower tray with drain hole d 60 mm. There is hair stop HL 526 and plug. The mounting height is 95 mm.

Diameter Capacity Material Weight
DN, mm l/s   kg
40/50 х d 80 0,58 PP/PE 0,253
Photo
Photo Hutterer & Lechner shower trap as HL 514 but without HL 526 [Code number: HL 514-K]
Hutterer & Lechner shower trap as HL 514 but without HL 526 [Code number: HL 514-K]
Details 		HL 514-K

HL 514-K is a shower trap which is installed in shower trays and equipped with ball-joint. The shower trap is horizontal.Without a hair stop. Mounting height 95 mm.

Diameter Capacity Material Weight
DN, mm l/s   kg
40/50 x 6/4" 0,58 PP/PE 0,275
Photo Draft
Photo Hutterer & Lechner Shower trap with ball-joint and stainless steel-coverplate d 86mm, horizontal, DN40/50x1 1/2' [Code number: HL 514/SN] Draft Hutterer & Lechner Shower trap with ball-joint and stainless steel-coverplate d 86mm, horizontal, DN40/50x1 1/2' [Code number: HL 514/SN]
Hutterer & Lechner Shower trap with ball-joint and stainless steel-coverplate d 86mm, horizontal, DN40/50x1 1/2' [Code number: HL 514/SN]
Details 		HL 514/SN 3 565 rub

HL 514/SN shower trap DN40/50x1 1/2' horizontal is designed for shower trays. It is equipped with ball-joint and stainless steel-coverplate d 86 mm. Color of the decorative coverplate can be different. It is mounted on 85 mm height, capacity is 0.48 l/s.

Diameter Capacity Material Weight
DN, mm l/s   gr
40/50 0,48 polypropylene / polyethylene 330

Documentation

Download example of product installation:  Shower trap HL 514/SN

Photo Draft
Photo Hutterer & Lechner shower trap horizontal with ball-joint, DN40/50x1 1/2' [Code number: HL 514/SN.0] Draft Hutterer & Lechner shower trap horizontal with ball-joint, DN40/50x1 1/2' [Code number: HL 514/SN.0]
Hutterer & Lechner shower trap horizontal with ball-joint, DN40/50x1 1/2' [Code number: HL 514/SN.0]
Details 		HL 514/SN.0 2 639 rub

HL 514/SN.0 is a shower trap which is installed in shower trays and equipped with ball-joint. The shower trap is horizontal, drain hole 6/4". Comes with function lot cover / assembling tool.

Diameter Capacity Material Weight
DN, mm l/s   kg
40/50 0,48 PP/PE 0,33

Documentation

Download example of product installation:  Shower trap HL 514/SN.0

Photo Draft
Photo Hutterer & Lechner Shower trap for waste holes d 60 mm, with ball-joint, horizontal, DN40/50 x 80 mm [Code number: HL 514/SN-80] Draft Hutterer & Lechner Shower trap for waste holes d 60 mm, with ball-joint, horizontal, DN40/50 x 80 mm [Code number: HL 514/SN-80]
Hutterer & Lechner Shower trap for waste holes d 60 mm, with ball-joint, horizontal, DN40/50 x 80 mm [Code number: HL 514/SN-80]
Details 		HL 514/SN-80 3 565 rub

HL 514/SN-80 shower trap DN40/50x80 horizontal is designed for shower trays and is equipped with ball-joint. The HL Company for manufacturing  HL 514 / SN-80 uses polypropylene. Capacity of the trap is 0.55 l/s. Diameter of waste holes is 60 mm. Trap is equipped with a stainless steel-coverplate d 86 mm. Trap is self-cleaning, and coverplate can be colored or covered with metal.

Diameter Capacity Material Weight
DN, mm l/s   gr
40/50 0,55 polypropylene 335

">
© Inrusstrade.ru 1999-2026. "Inrusstrade" Ltd. Copying and quoting is prohibited

Privacy policy