Logo
Ru| En

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Name Article Price
Photo Draft
Photo Hutterer & Lechner Stainless steel shower gutter to be used in the surface without cover, vertical DN50, MOUNTING HEIGHT 31 mm!, length 2000 mm [Code number: HL 50FV.0/200] Draft Hutterer & Lechner Stainless steel shower gutter to be used in the surface without cover, vertical DN50, MOUNTING HEIGHT 31 mm!, length 2000 mm [Code number: HL 50FV.0/200]
Hutterer & Lechner Stainless steel shower gutter to be used in the surface without cover, vertical DN50, MOUNTING HEIGHT 31 mm!, length 2000 mm [Code number: HL 50FV.0/200]
Details 		HL 50FV.0/200 183 114 rub

Stainless steel shower gutter HL 50FV.0/200 comes with adjustable screws pads with sound-absorbing seal. Height of the water seal is 50 mm. Shower gutter is supplied with PP drain DN50 with vertical outlet. There is rubber endings to deaden sound. There are four legs that can be adjusted in height..

Diameter Size, mm Capacity Load Quantity of siphon cartridges
DN, mm L Mounting height l/s kg pieces
50 2000 130 1,4 300 2
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 10,12 0,0513375
Photo Draft
Photo Hutterer & Lechner Stainless steel shower gutter to be used in the surface without cover, vertical DN50, MOUNTING HEIGHT 31 mm!, length 2100 mm [Code number: HL 50FV.0/210] Draft Hutterer & Lechner Stainless steel shower gutter to be used in the surface without cover, vertical DN50, MOUNTING HEIGHT 31 mm!, length 2100 mm [Code number: HL 50FV.0/210]
Hutterer & Lechner Stainless steel shower gutter to be used in the surface without cover, vertical DN50, MOUNTING HEIGHT 31 mm!, length 2100 mm [Code number: HL 50FV.0/210]
Details 		HL 50FV.0/210 187 414 rub

Stainless steel shower gutter HL 50FV.0/210 comes with adjustable screws pads with sound-absorbing seal. Height of the water seal is 50 mm. Shower gutter is supplied with PP drain DN50 with vertical outlet. There is rubber endings to deaden sound. There are four legs that can be adjusted in height..

Diameter Size, mm Capacity Load Quantity of siphon cartridges Weight
DN, mm L Mounting height l/s kg pieces kg/pc
50 2100 130 1,4 300 2 9,87
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 10,37 0,0513375
Photo Draft
Photo Hutterer & Lechner Shower gutter to be used in the surface (h = 31 mm!), vertical drain DN50, without cover, length 600 mm [Code number: HL 50FV.0/60] Draft Hutterer & Lechner Shower gutter to be used in the surface (h = 31 mm!), vertical drain DN50, without cover, length 600 mm [Code number: HL 50FV.0/60]
Hutterer & Lechner Shower gutter to be used in the surface (h = 31 mm!), vertical drain DN50, without cover, length 600 mm [Code number: HL 50FV.0/60]
Details 		HL 50FV.0/60 77 313 rub

Flat shower gutter HL 50FV.0/60 comes with adjustable screws pads. Height of the siphon cartridge is 50 mm. Shower gutter is supplied with PP drain DN50 with vertical outlet. Body of the gutter has sanded flange for connection to hydroinsulation. Installation length is 600 mm, capacity is 0,8 l/s.

Diameter Size, mm LY Capacity Load Quantity of siphon cartridges
DN, mm L H min мм l/s kg pieces
50 600 31 500 0,8 300 1
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 4,26 0,0513375
Photo Draft
Photo Hutterer & Lechner Shower gutter to be used in the surface (h = 31 mm!), vertical drain DN50, without cover, length 700 mm [Code number: HL 50FV.0/70] Draft Hutterer & Lechner Shower gutter to be used in the surface (h = 31 mm!), vertical drain DN50, without cover, length 700 mm [Code number: HL 50FV.0/70]
Hutterer & Lechner Shower gutter to be used in the surface (h = 31 mm!), vertical drain DN50, without cover, length 700 mm [Code number: HL 50FV.0/70]
Details 		HL 50FV.0/70 79 720 rub

Flat shower gutter HL 50FV.0/70 comes with adjustable screws pads. Height of the siphon cartridge is 50 mm. Shower gutter is supplied with PP drain DN50 with vertical outlet. Body of the gutter has sanded flange for connection to hydroinsulation. Installation length is 700 mm, capacity is 0,8 l/s.

Diameter Size, mm LY Capacity Load Quantity of siphon cartridges
DN, mm L H min мм l/s kg pieces
50 700 31 600 0,8 300 1
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 4,34 0,0513375
Photo Draft
Photo Hutterer & Lechner Stainless steel shower gutter to be used in the surface without cover, vertical DN50, MOUNTING HEIGHT 31 mm!, length 800 mm [Code number: HL 50FV.0/80] Draft Hutterer & Lechner Stainless steel shower gutter to be used in the surface without cover, vertical DN50, MOUNTING HEIGHT 31 mm!, length 800 mm [Code number: HL 50FV.0/80]
Hutterer & Lechner Stainless steel shower gutter to be used in the surface without cover, vertical DN50, MOUNTING HEIGHT 31 mm!, length 800 mm [Code number: HL 50FV.0/80]
Details 		HL 50FV.0/80 85 739 rub

Stainless steel shower gutter HL 50FV.0/80 comes with adjustable screws pads with sound-absorbing seal. Height of the water seal is 50 mm. Shower gutter is supplied with PP drain DN50 with vertical outlet. There is rubber endings to deaden sound. There are four legs that can be adjusted in height..

Diameter Size, mm Capacity Load Quantity of siphon cartridges
DN, mm L Mounting height l/s kg pieces
50 800 130 0,8 300 1
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 4,56 0,0513375
Photo Draft
Photo Hutterer & Lechner Shower gutter to be connected to the wall, drain DN50, without cover, horizontal, length 1000 mm [Code number: HL 50W.0/100] Draft Hutterer & Lechner Shower gutter to be connected to the wall, drain DN50, without cover, horizontal, length 1000 mm [Code number: HL 50W.0/100]
Hutterer & Lechner Shower gutter to be connected to the wall, drain DN50, without cover, horizontal, length 1000 mm [Code number: HL 50W.0/100]
Details 		HL 50W.0/100 89 434 rub

Stainless steel shower gutter HL 50W.0/100 to be connected to the wall, and it allows a linear diversion of wastewater from showers. It is mounted to pipes with a diameter of 50 mm, and shower gutter is equipped with a ball joint for ease of connection to drainage pipe. PP drain with horizontal outlet. Body of gutter with sanded flange and egde for connection to hydroinsulation. Shower gutter supplies with adjustment screws. Length of shower gutter is 1000 mm.

Diameter Size, mm Capacity Load Weight
DN, mm L H min l/s kg gr
50 1000 110 0,8 300 3462
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 4,34 0,0513375

Download the installation instructions of product: HL 50W.0/100 Shower gutter HL 50W.0/100
Photo Draft
Photo Hutterer & Lechner Shower gutter to be connected to the wall, with 2 siphones, without cover, horizontal, length 1000 mm, DN 50 [Code number: HL 50W.0/100.2] Draft Hutterer & Lechner Shower gutter to be connected to the wall, with 2 siphones, without cover, horizontal, length 1000 mm, DN 50 [Code number: HL 50W.0/100.2]
Hutterer & Lechner Shower gutter to be connected to the wall, with 2 siphones, without cover, horizontal, length 1000 mm, DN 50 [Code number: HL 50W.0/100.2]
Details 		HL 50W.0/100.2 136 019 rub

Stainless steel shower gutter HL 50W.0/100.2 to be connected to the wall, and it allows a linear diversion of wastewater from showers. It is mounted to pipes with a diameter of 50 mm, and shower gutter is equipped with a ball joint for ease of connection to drainage pipe. 2 x PP drain with horizontal outlet. Body of gutter with sanded flange and egde for connection to hydroinsulation. Shower gutter supplies with adjustment screws. Length of shower gutter is 1000 mm.

Diameter Size, mm Load Weight
DN, mm L H min kg gr
50 1000 110 300  
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 0 0

Download the installation instructions of product: HL 50W.0/100.2 Shower gutter HL 50W.0/100.2
Photo Draft
Photo Hutterer & Lechner Flat stainless steel shower channel for installation near the wall without cover, horizontal, length 1100 mm, DN 50 [Code number: HL 50W.0/110] Draft Hutterer & Lechner Flat stainless steel shower channel for installation near the wall without cover, horizontal, length 1100 mm, DN 50 [Code number: HL 50W.0/110]
Hutterer & Lechner Flat stainless steel shower channel for installation near the wall without cover, horizontal, length 1100 mm, DN 50 [Code number: HL 50W.0/110]
Details 		HL 50W.0/110 93 815 rub

Stainless steel shower channel HL 50W.0/110 to be connected to the wall, and it allows a linear diversion of wastewater from showers. There is rubber endings to deaden sound. The outlet is horizontal with ball joint. It has sanded flange and egde for connection to hydroinsulation.

Diameter Size, mm Capacity Load Weight
DN, mm L H l/s kg kg
50 1100 110-128 0,8 300 3,769
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 4,647 0,0513375

Download the installation instructions of product: HL 50W.0/110 Shower channel HL 50W.0/110
Photo Draft
Photo Hutterer & Lechner Shower gutter to be connected to the wall, with 2 siphones, without cover, horizontal, length 1100 mm, DN 50 [Code number: HL 50W.0/110.2] Draft Hutterer & Lechner Shower gutter to be connected to the wall, with 2 siphones, without cover, horizontal, length 1100 mm, DN 50 [Code number: HL 50W.0/110.2]
Hutterer & Lechner Shower gutter to be connected to the wall, with 2 siphones, without cover, horizontal, length 1100 mm, DN 50 [Code number: HL 50W.0/110.2]
Details 		HL 50W.0/110.2 167 058 rub

Stainless steel shower gutter HL 50W.0/110 to be connected to the wall, and it allows a linear diversion of wastewater from showers. It is mounted to pipes with a diameter of 50 mm, and shower gutter is equipped with a ball joint for ease of connection to drainage pipe. 2 x PP drain with horizontal outlet. Body of gutter with sanded flange and egde for connection to hydroinsulation. Shower gutter supplies with adjustment screws. Length of shower gutter is 1100 mm.

Diameter Size, mm Load Weight
DN, mm L H min kg gr
50 1000 110 300  
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 0 0

Download the installation instructions of product: HL 50W.0/110.2 Shower gutter HL 50W.0/110.2
Photo Draft
Photo Hutterer & Lechner Shower gutter to be connected to the wall, incl. drain DN50, without cover, horizontal, length 1200 mm [Code number: HL 50W.0/120] Draft Hutterer & Lechner Shower gutter to be connected to the wall, incl. drain DN50, without cover, horizontal, length 1200 mm [Code number: HL 50W.0/120]
Hutterer & Lechner Shower gutter to be connected to the wall, incl. drain DN50, without cover, horizontal, length 1200 mm [Code number: HL 50W.0/120]
Details 		HL 50W.0/120 94 891 rub

Stainless steel shower gutter HL 50W.0/120 to be connected to the wall, and it allows a linear diversion of wastewater from showers. It is mounted to pipes with a diameter of 50 mm, and shower gutter is equipped with a ball joint for ease of connection to drainage pipe. PP drain with horizontal outlet. Body of gutter with sanded flange and egde for connection to hydroinsulation. Shower gutter supplies with adjustment screws. Length of shower gutter is 1200 mm.

Diameter Size, mm Capacity Load Weight
DN, mm L H min l/s kg gr
50 1200 110 0,8 300 4082
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 4,96 0,0513375

Download the installation instructions of product: HL 50W.0/120 Shower gutter HL 50W.0/120
Photo Draft
Photo Hutterer & Lechner Shower gutter to be connected to the wall, with 2 siphones, without cover, horizontal, length 1200 mm, DN 50 [Code number: HL 50W.0/120.2] Draft Hutterer & Lechner Shower gutter to be connected to the wall, with 2 siphones, without cover, horizontal, length 1200 mm, DN 50 [Code number: HL 50W.0/120.2]
Hutterer & Lechner Shower gutter to be connected to the wall, with 2 siphones, without cover, horizontal, length 1200 mm, DN 50 [Code number: HL 50W.0/120.2]
Details 		HL 50W.0/120.2 124 841 rub

Stainless steel shower gutter HL 50W.0/120.2 to be connected to the wall, and it allows a linear diversion of wastewater from showers. It is mounted to pipes with a diameter of 50 mm, and shower gutter is equipped with a ball joint for ease of connection to drainage pipe. 2 x PP drain with horizontal outlet. Body of gutter with sanded flange and egde for connection to hydroinsulation. Shower gutter supplies with adjustment screws. Length of shower gutter is 1200 mm.

Diameter Size, mm Load Weight
DN, mm L H min kg gr
50 1200 110 300  
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 0 0

Download the installation instructions of product: HL 50W.0/120.2 Shower gutter HL 50W.0/120.2
Photo Draft
Photo Hutterer & Lechner Shower gutter to be connected to the wall, incl. drain DN50, without cover, horizontal, length 1300 mm [Code number: HL 50W.0/130] Draft Hutterer & Lechner Shower gutter to be connected to the wall, incl. drain DN50, without cover, horizontal, length 1300 mm [Code number: HL 50W.0/130]
Hutterer & Lechner Shower gutter to be connected to the wall, incl. drain DN50, without cover, horizontal, length 1300 mm [Code number: HL 50W.0/130]
Details 		HL 50W.0/130 122 168 rub

Stainless steel shower gutter HL 50W.0/130 to be connected to the wall, and it allows a linear diversion of wastewater from showers. It is mounted to pipes with a diameter of 50 mm, and shower gutter is equipped with a ball joint for ease of connection to drainage pipe. PP drain with horizontal outlet. Body of gutter with sanded flange and egde for connection to hydroinsulation. Shower gutter supplies with adjustment screws. Length of shower gutter is 1300 mm.

Diameter Size, mm Capacity Load Weight
DN, mm L H min l/s kg gr
50 1300 110 0,8 300 4283
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 5,161 0,0513375

Download the installation instructions of product: HL 50W.0/130 Shower gutter HL 50W.0/130
Photo Draft
Photo Hutterer & Lechner Shower gutter to be connected to the wall, with 2 siphones, without cover, horizontal, length 1300 mm, DN 50 [Code number: HL 50W.0/130 + 2 Sifone] Draft Hutterer & Lechner Shower gutter to be connected to the wall, with 2 siphones, without cover, horizontal, length 1300 mm, DN 50 [Code number: HL 50W.0/130 + 2 Sifone]
Hutterer & Lechner Shower gutter to be connected to the wall, with 2 siphones, without cover, horizontal, length 1300 mm, DN 50 [Code number: HL 50W.0/130 + 2 Sifone]
Details 		HL 50W.0/130 + 2 Sifone 175 155 rub

Stainless steel shower gutter HL 50W.0/130 + 2 Sifone to be connected to the wall, and it allows a linear diversion of wastewater from showers. It is mounted to pipes with a diameter of 50 mm, and shower gutter is equipped with a ball joint for ease of connection to drainage pipe. 2 x PP drain with horizontal outlet. Body of gutter with sanded flange and egde for connection to hydroinsulation. Shower gutter supplies with adjustment screws. Length of shower gutter is 1300 mm.

Diameter Size, mm Capacity Load Weight
DN, mm L H min l/s kg gr
50 1300 110 0,8 300  
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 0 0

Download the installation instructions of product: HL 50W.0/130 + 2 Sifone Shower gutter HL 50W.0/130 + 2 Sifone
Photo Draft
Photo Hutterer & Lechner Shower gutter to be connected to the wall, incl. drain DN50, without cover, horizontal, length 1400 mm [Code number: HL 50W.0/140] Draft Hutterer & Lechner Shower gutter to be connected to the wall, incl. drain DN50, without cover, horizontal, length 1400 mm [Code number: HL 50W.0/140]
Hutterer & Lechner Shower gutter to be connected to the wall, incl. drain DN50, without cover, horizontal, length 1400 mm [Code number: HL 50W.0/140]
Details 		HL 50W.0/140 166 114 rub

Stainless steel shower gutter HL 50W.0/140 to be connected to the wall, and it allows a linear diversion of wastewater from showers. It is mounted to pipes with a diameter of 50 mm, and shower gutter is equipped with a ball joint for ease of connection to drainage pipe. 2 x PP drain with horizontal outlet. Body of gutter with sanded flange and egde for connection to hydroinsulation. Shower gutter supplies with adjustment screws. Length of shower gutter is 1400 mm.

Diameter Size, mm LY Capacity Load Weight
DN, mm L H min mm l/s kg gr
50 1400 110 500 1,4 300 6200
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 6,851 0,0513375

Download the installation instructions of product: HL 50W.0/140 Shower gutter HL 50W.0/140
Photo Draft
Photo Hutterer & Lechner Shower gutter to be connected to the wall, incl. drain DN50, without cover, horizontal, length 1500 mm [Code number: HL 50W.0/150] Draft Hutterer & Lechner Shower gutter to be connected to the wall, incl. drain DN50, without cover, horizontal, length 1500 mm [Code number: HL 50W.0/150]
Hutterer & Lechner Shower gutter to be connected to the wall, incl. drain DN50, without cover, horizontal, length 1500 mm [Code number: HL 50W.0/150]
Details 		HL 50W.0/150 169 528 rub

Stainless steel shower gutter HL 50W.0/150 to be connected to the wall, and it allows a linear diversion of wastewater from showers. It is mounted to pipes with a diameter of 50 mm, and shower gutter is equipped with a ball joint for ease of connection to drainage pipe. 2 x PP drain with horizontal outlet. Body of gutter with sanded flange and egde for connection to hydroinsulation. Shower gutter supplies with adjustment screws. Length of shower gutter is 1500 mm.

Diameter Size, mm LY Capacity Load Weight
DN, mm L H min mm l/s kg gr
50 1500 110 500 1,4 300 6480
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 7,157 0,0513375

Download the installation instructions of product: HL 50W.0/150 Shower gutter HL 50W.0/150
Photo Draft
Photo Hutterer & Lechner Flat stainless steel shower channel for installation near the wall with 2 PP drains, without cover, horizontal, length 1600 mm, DN 50 [Code number: HL 50W.0/160] Draft Hutterer & Lechner Flat stainless steel shower channel for installation near the wall with 2 PP drains, without cover, horizontal, length 1600 mm, DN 50 [Code number: HL 50W.0/160]
Hutterer & Lechner Flat stainless steel shower channel for installation near the wall with 2 PP drains, without cover, horizontal, length 1600 mm, DN 50 [Code number: HL 50W.0/160]
Details 		HL 50W.0/160 173 014 rub

Stainless steel shower channel HL 50W.0/160 to be connected to the wall, and it allows a linear diversion of wastewater from showers. There is rubber endings to deaden sound. The outlet is horizontal with ball joint. It has sanded flange and egde for connection to hydroinsulation.

Diameter Size, mm Capacity Load Weight
DN, mm L H l/s kg kg
50 1600 110-128 1,4 300 5,285
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 7,467 0,0513375

Download the installation instructions of product: HL 50W.0/160 Shower channel HL 50W.0/160
Photo Draft
Photo Hutterer & Lechner Shower gutter to be connected to the wall, incl. drain DN50, without cover, horizontal, length 1700 mm [Code number: HL 50W.0/170] Draft Hutterer & Lechner Shower gutter to be connected to the wall, incl. drain DN50, without cover, horizontal, length 1700 mm [Code number: HL 50W.0/170]
Hutterer & Lechner Shower gutter to be connected to the wall, incl. drain DN50, without cover, horizontal, length 1700 mm [Code number: HL 50W.0/170]
Details 		HL 50W.0/170 176 434 rub

Stainless steel shower gutter HL 50W.0/170 to be connected to the wall, and it allows a linear diversion of wastewater from showers. It is mounted to pipes with a diameter of 50 mm, and shower gutter is equipped with a ball joint for ease of connection to drainage pipe. 2 x PP drain with horizontal outlet. Body of gutter with sanded flange and egde for connection to hydroinsulation. Shower gutter supplies with adjustment screws. Length of shower gutter is 1700 mm.

Diameter Size, mm LY Capacity Load Weight
DN, mm L H min mm l/s kg gr
50 1700 110 600 1,4 300 6960
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 7,71 0,0513375

Download the installation instructions of product: HL 50W.0/170 Shower gutter HL 50W.0/170
Photo Draft
Photo Hutterer & Lechner Shower gutter to be connected to the wall, incl. drain DN50, without cover, horizontal, length 1800 mm [Code number: HL 50W.0/180] Draft Hutterer & Lechner Shower gutter to be connected to the wall, incl. drain DN50, without cover, horizontal, length 1800 mm [Code number: HL 50W.0/180]
Hutterer & Lechner Shower gutter to be connected to the wall, incl. drain DN50, without cover, horizontal, length 1800 mm [Code number: HL 50W.0/180]
Details 		HL 50W.0/180 179 771 rub

Stainless steel shower gutter HL 50W.0/180 to be connected to the wall, and it allows a linear diversion of wastewater from showers. It is mounted to pipes with a diameter of 50 mm, and shower gutter is equipped with a ball joint for ease of connection to drainage pipe. 2 x PP drain with horizontal outlet. Body of gutter with sanded flange and egde for connection to hydroinsulation. Shower gutter supplies with adjustment screws. Length of shower gutter is 1800 mm.

Diameter Size, mm LY Capacity Load Weight
DN, mm L H min mm l/s kg gr
50 1800 110 700 1,4 300 7200
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 7,947 0,0513375

Download the installation instructions of product: HL 50W.0/180 Shower gutter HL 50W.0/180
Photo Draft
Photo Hutterer & Lechner Flat stainless steel shower channel for installation near the wall without cover (2 drains), horizontal, length 1900 mm, DN 50 [Code number: HL 50W.0/190] Draft Hutterer & Lechner Flat stainless steel shower channel for installation near the wall without cover (2 drains), horizontal, length 1900 mm, DN 50 [Code number: HL 50W.0/190]
Hutterer & Lechner Flat stainless steel shower channel for installation near the wall without cover (2 drains), horizontal, length 1900 mm, DN 50 [Code number: HL 50W.0/190]
Details 		HL 50W.0/190 183 187 rub

Stainless steel shower channel HL 50W.0/190 to be connected to the wall, and it allows a linear diversion of wastewater from showers. There is rubber endings to deaden sound. The outlet is horizontal with ball joint. It has sanded flange and egde for connection to hydroinsulation.

Diameter Size, mm Capacity Load Weight
DN, mm L H l/s kg kg
50 1900 110-128 1,4 300 6,029
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 8,282 0,0513375

Download the installation instructions of product: HL 50W.0/190 Shower channel HL 50W.0/190
Photo Draft
Photo Hutterer & Lechner Flat stainless steel shower channel for installation near the wall without cover (2 drains), horizontal, length 2000 mm, DN 50 [Code number: HL 50W.0/200] Draft Hutterer & Lechner Flat stainless steel shower channel for installation near the wall without cover (2 drains), horizontal, length 2000 mm, DN 50 [Code number: HL 50W.0/200]
Hutterer & Lechner Flat stainless steel shower channel for installation near the wall without cover (2 drains), horizontal, length 2000 mm, DN 50 [Code number: HL 50W.0/200]
Details 		HL 50W.0/200 186 600 rub

Stainless steel shower channel HL 50W.0/200 to be connected to the wall, and it allows a linear diversion of wastewater from showers. There is rubber endings to deaden sound. The outlet is horizontal with ball joint. It has sanded flange and egde for connection to hydroinsulation.

Diameter Size, mm Capacity Load Weight
DN, mm L H l/s kg kg
50 2000 110-128 1,4 300 6,151
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 8,632 0,0513375

Download the installation instructions of product: HL 50W.0/200 Shower channel HL 50W.0/200

© Inrusstrade.ru 1999-2024. "Inrusstrade" Ltd. Copying and quoting is prohibited