Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Lenin Hills

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Наименование Article Цена
Hutterer Lechner concealed installation kit for connecting a washbasin with a replaceable siphon block and a set of plastic connecting elements [Code number: HL 4300.K]
Details 		HL 4300.K 7 845 rub
Photo
Photo Hutterer & Lechner urinal trap (1 liter), DN40 [Code number: HL 430-1L/40]
Hutterer & Lechner urinal trap (1 liter), DN40 [Code number: HL 430-1L/40]
Details 		HL 430-1L/40 5 671 rub

HL 430-1L/40 - urinal trap with horizontal outlet.

Diameter Material Smooth customization
DN, mm
40 PP 0 - 90°
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
85 105 300 0,188 0,002677500
Photo Draft
Photo Hutterer & Lechner Urinal trap (1 litre), DN50 [Code number: HL 430-1L/50] Draft Hutterer & Lechner Urinal trap (1 litre), DN50 [Code number: HL 430-1L/50]
Hutterer & Lechner Urinal trap (1 litre), DN50 [Code number: HL 430-1L/50]
Details 		HL 430-1L/50 5 671 rub

Urinal trap HL 430-1L/50 with outlet DN50 horizontal. It is made of polypropylene and is intended for connection to urinals and bidet. With lip seal and swivelling connector (0°- 90°).

Diameter Material Weight
DN, mm   gr
50 polypropylene 197
Photo Draft
Photo Hutterer & Lechner Urinal trap, DN40 [Code number: HL 430/40] Draft Hutterer & Lechner Urinal trap, DN40 [Code number: HL 430/40]
Hutterer & Lechner Urinal trap, DN40 [Code number: HL 430/40]
Details 		HL 430/40 5 653 rub

Urinal trap HL 430/40 with outlet DN40 horizontal. It is made of polypropylene and is intended for connection to urinals and bidet. The trap is equipped with lip seal and swivelling connector (0°- 90°).

Diameter Material Weight
DN, mm   gr
40 polypropylene 180

Documentation

Download example of product installation:  Urinal trap HL 430/40

Photo Draft
Photo Hutterer & Lechner Urinal trap, DN50 [Code number: HL 430/50] Draft Hutterer & Lechner Urinal trap, DN50 [Code number: HL 430/50]
Hutterer & Lechner Urinal trap, DN50 [Code number: HL 430/50]
Details 		HL 430/50 5 372 rub

Urinal trap HL 430/50 with outlet DN50 horizontal. It is made of polypropylene and is intended for connection to urinals and bidet. The trap is equipped with lip seal and swivelling connector (0°- 90°).

Diameter Material Weight
DN, mm   gr
50 polypropylene 185

Documentation

Download example of product installation:  Urinal trap HL 430/50

Photo Draft
Photo Hutterer & Lechner Urinal trap with electronic 4-channel sensor for urinals with microprocessor control HLiQ145 and HLiQ110, DN40 [Code number: HL 430E/40] Draft Hutterer & Lechner Urinal trap with electronic 4-channel sensor for urinals with microprocessor control HLiQ145 and HLiQ110, DN40 [Code number: HL 430E/40]
Hutterer & Lechner Urinal trap with electronic 4-channel sensor for urinals with microprocessor control HLiQ145 and HLiQ110, DN40 [Code number: HL 430E/40]
Details 		HL 430E/40 34 630 rub

Urinal trap HL 430E/40 with outlet DN40. With electronic 4-channel sensor for urinals with microprocessor control HLiQ145 and HLiQ110.

Diameter Material Weight
DN, mm   gr
40 polypropylene 190
Photo Draft
Photo Hutterer & Lechner Urinal trap for bowls with vertical outlet, DN40 [Code number: HL 431/40] Draft Hutterer & Lechner Urinal trap for bowls with vertical outlet, DN40 [Code number: HL 431/40]
Hutterer & Lechner Urinal trap for bowls with vertical outlet, DN40 [Code number: HL 431/40]
Details 		HL 431/40 6 936 rub

Urinal trap HL 431/40 with vertical outlet DN40. It is made of polypropylene. The trap is equipped with lip seal and swivelling connector (0°- 90°).

Diameter Material Weight
DN, mm   gr
40 polypropylene 250

Documentation

Download example of product installation:  Urinal trap HL 431/40

Photo Draft
Photo Hutterer & Lechner Urinal trap for bowls with vertical outlet, DN50 [Code number: HL 431/50] Draft Hutterer & Lechner Urinal trap for bowls with vertical outlet, DN50 [Code number: HL 431/50]
Hutterer & Lechner Urinal trap for bowls with vertical outlet, DN50 [Code number: HL 431/50]
Details 		HL 431/50 6 936 rub

Urinal trap HL 431/50 with vertical outlet DN50. It is made of polypropylene. The trap is equipped with lip seal and swivelling connector (0°- 90°).

Diameter Material Weight
DN, mm   gr
50 polypropylene 260

Documentation

Download example of product installation:  Urinal trap HL 431/50

Photo Draft
Photo Hutterer & Lechner Urinal trap, e.g. for Keramag 'Joly', DN40 [Code number: HL 432/40] Draft Hutterer & Lechner Urinal trap, e.g. for Keramag 'Joly', DN40 [Code number: HL 432/40]
Hutterer & Lechner Urinal trap, e.g. for Keramag 'Joly', DN40 [Code number: HL 432/40]
Details 		HL 432/40 5 653 rub

Urinal trap HL 432/40 with horizontal outlet DN40. It is made of polypropylene. For Keramag 'Joly'. The trap is equipped with lip seal and swivelling connector (0°- 90°).

Diameter Material Weight
DN, mm   gr
40 polypropylene 190
Photo Draft
Photo Hutterer & Lechner Urinal trap, e.g. for Keramag 'Joly', DN50 [Code number: HL 432/50] Draft Hutterer & Lechner Urinal trap, e.g. for Keramag 'Joly', DN50 [Code number: HL 432/50]
Hutterer & Lechner Urinal trap, e.g. for Keramag 'Joly', DN50 [Code number: HL 432/50]
Details 		HL 432/50 5 653 rub

Urinal trap HL 432/50 with horizontal outlet DN50. It is made of polypropylene. For Keramag 'Joly'. The trap is equipped with lip seal and swivelling connector (0°- 90°).

Diameter Material Weight
DN, mm   gr
50 polypropylene 195
Photo Draft
Photo Hutterer & Lechner Recessed washing device trap, DN40/50 [Code number: HL 440] Draft Hutterer & Lechner Recessed washing device trap, DN40/50 [Code number: HL 440]
Hutterer & Lechner Recessed washing device trap, DN40/50 [Code number: HL 440]
Details 		HL 440 2 437 rub

Recessed washing device trap HL 440 is equipped with a cleaning eye and stainless steel coverplate 160 x 110 mm. Capacity is 0.33 l/s. Minimum installation depth 55 mm.

Diameter Capacity Material Weight
DN mm l/s   gr
40/50 0,33 PE 200

Documentation

Download example of product installation:  Recessed washing device trap HL 440

Photo Draft
Photo Hutterer & Lechner Bath tub trap with ball-joint, DN40/50x1 1/4' [Code number: HL 500-5/4] Draft Hutterer & Lechner Bath tub trap with ball-joint, DN40/50x1 1/4' [Code number: HL 500-5/4]
Hutterer & Lechner Bath tub trap with ball-joint, DN40/50x1 1/4' [Code number: HL 500-5/4]
Details 		HL 500-5/4 2 388 rub

Application area:

  • For bath

Characteristics:

  • Material: PP/PE
  • Dimension: DN40/50 x 5/4"
  • Capacity: 0,83 l/s
  • Installation height: 93 mm

Weight: 0,09 kg

 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
80 100 252 0,098 0,002016000

Documentation

Download example of product installation:  Bath tub trap HL 500-5/4

Photo Draft
Photo Hutterer & Lechner Shower gutter to be used in the surface, without cover, horizontal, length 1000mm, DN 50 [Code number: HL 50F.0/100] Draft Hutterer & Lechner Shower gutter to be used in the surface, without cover, horizontal, length 1000mm, DN 50 [Code number: HL 50F.0/100]
Hutterer & Lechner Shower gutter to be used in the surface, without cover, horizontal, length 1000mm, DN 50 [Code number: HL 50F.0/100]
Details 		HL 50F.0/100 87 418 rub

The HL Company produces shower gutter HL 50F.0/100 with PP drain with ball joint DN50 with horizontal outlet. Length is 1000 mm. Height of siphon cartridge is 50 mm. Body of gutter with sanded flange for connection to hydroinsulation. Capacity of shower gutter is 0.8 l/s, and load class is K3 - 300kg. Included adjustable screws pads.

Diameter Size, mm Capacity Load Weight
DN, mm L H min l/s kg gr
50 1000 110 0,8 300 3224
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 4,055 0,0513375

Documentation

Download data sheet: Shower gutter HL 50F.0/100

Download example of product installation:  Shower gutter HL 50F.0/100

Photo Draft
Photo Hutterer & Lechner Stainless steel shower gutter to be used in the surface with 2 PP drains, without cover, horizontal, length 1000mm, DN 50 [Code number: HL 50F.0/100.2] Draft Hutterer & Lechner Stainless steel shower gutter to be used in the surface with 2 PP drains, without cover, horizontal, length 1000mm, DN 50 [Code number: HL 50F.0/100.2]
Hutterer & Lechner Stainless steel shower gutter to be used in the surface with 2 PP drains, without cover, horizontal, length 1000mm, DN 50 [Code number: HL 50F.0/100.2]
Details 		HL 50F.0/100.2 131 784 rub

The HL Company produces shower gutter HL 50F.0/100.2 with PP drain with ball joint. Height of siphon cartridge is 50 mm. Body of gutter with sanded flange for connection to hydroinsulation. Included adjustable screws pads.

Diameter Size, mm Load
DN, mm L H kg
50 1000 110-128 300
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 4,055 0,0513375

Documentation

Download data sheet: Shower gutter HL 50F.0/100.2

Download example of product installation:  Shower gutter HL 50F.0/100.2

Photo Draft
Photo Hutterer & Lechner Shower gutter to be used in the surface, without cover, horizontal, length 1100mm, DN 50 [Code number: HL 50F.0/110] Draft Hutterer & Lechner Shower gutter to be used in the surface, without cover, horizontal, length 1100mm, DN 50 [Code number: HL 50F.0/110]
Hutterer & Lechner Shower gutter to be used in the surface, without cover, horizontal, length 1100mm, DN 50 [Code number: HL 50F.0/110]
Details 		HL 50F.0/110 89 830 rub

The HL Company produces shower gutter HL 50F.0/110 with PP drain with ball joint DN50 with horizontal outlet. Length is 1100 mm. Height of siphon cartridge is 50 mm. Body of gutter with sanded flange for connection to hydroinsulation. Capacity of shower gutter is 0.8 l/s, and load class is K3 - 300kg. Included adjustable screws pads.

Diameter Size, mm Capacity Load Weight
DN, mm L H min l/s kg gr
50 1100 110 0,8 300 3525
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 4,356 0,0513375

Documentation

Download data sheet: Shower gutter HL 50F.0/110

Download example of product installation:  Shower gutter HL 50F.0/110

Photo Draft
Photo Hutterer & Lechner Stainless steel shower gutter to be used in the surface with 2 drains, without cover, horizontal, length 1100mm, DN 50 [Code number: HL 50F.0/110.2] Draft Hutterer & Lechner Stainless steel shower gutter to be used in the surface with 2 drains, without cover, horizontal, length 1100mm, DN 50 [Code number: HL 50F.0/110.2]
Hutterer & Lechner Stainless steel shower gutter to be used in the surface with 2 drains, without cover, horizontal, length 1100mm, DN 50 [Code number: HL 50F.0/110.2]
Details 		HL 50F.0/110.2 134 523 rub

The HL Company produces shower gutter HL 50F.0/110.2 with PP drain with ball joint. Height of siphon cartridge is 50 mm. Body of gutter with sanded flange for connection to hydroinsulation. Included adjustable screws pads.

Diameter Size, mm Drains Load
DN, mm L H pc kg
50 1100 110-128 2 300
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 4,356 0,0513375

Documentation

Download data sheet: Shower gutter HL 50F.0/110.2

Download example of product installation:  Shower gutter HL 50F.0/110.2

Photo Draft
Photo Hutterer & Lechner Shower gutter to be used in the surface, but without cover, horizontal, length 1200mm, DN 50 [Code number: HL 50F.0/120] Draft Hutterer & Lechner Shower gutter to be used in the surface, but without cover, horizontal, length 1200mm, DN 50 [Code number: HL 50F.0/120]
Hutterer & Lechner Shower gutter to be used in the surface, but without cover, horizontal, length 1200mm, DN 50 [Code number: HL 50F.0/120]
Details 		HL 50F.0/120 94 299 rub

The HL Company produces shower gutter HL 50F.0/120 with PP drain with ball joint DN50 with horizontal outlet. Length is 1200 mm. Height of siphon cartridge is 50 mm. Body of gutter with sanded flange for connection to hydroinsulation. Capacity of shower gutter is 0.8 l/s, and load class is K3 - 300kg. Included adjustable screws pads.

Diameter Size, mm Capacity Load Weight
DN, mm L H min l/s kg gr
50 1200 110 0,8 300 3760
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 4,591 0,0513375

Documentation

Download data sheet: Shower gutter HL 50F.0/120

Download example of product installation:  Shower gutter HL 50F.0/120

Photo Draft
Photo Hutterer & Lechner Shower gutter to be used in the surface with 2 siphones, but without cover, horizontal, length 1200mm, DN 50 [Code number: HL 50F.0/120 + 2 Sifone] Draft Hutterer & Lechner Shower gutter to be used in the surface with 2 siphones, but without cover, horizontal, length 1200mm, DN 50 [Code number: HL 50F.0/120 + 2 Sifone]
Hutterer & Lechner Shower gutter to be used in the surface with 2 siphones, but without cover, horizontal, length 1200mm, DN 50 [Code number: HL 50F.0/120 + 2 Sifone]
Details 		HL 50F.0/120 + 2 Sifone 163 466 rub

Application area:

  • For barriere-free showers

Characteristics:

  • Material: stainless steel, PP
  • Dimension: 2 x DN50
  • capacity: 1,4 l/s
  • installation height: min. 110 mm
  • load class: Leaf catcher K3 - 300kg
  • standards: EN1253

Weight: 4,017 kg

 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1450 4,92 0,049626250

Documentation

Download data sheet: Shower gutter HL 50F.0/120 + 2 Sifone

Download example of product installation:  Shower gutter HL 50F.0/120 + 2 Sifone

Photo Draft
Photo Hutterer & Lechner Shower gutter to be used in the surface, but without cover, horizontal, length 1300mm, DN 50 [Code number: HL 50F.0/130] Draft Hutterer & Lechner Shower gutter to be used in the surface, but without cover, horizontal, length 1300mm, DN 50 [Code number: HL 50F.0/130]
Hutterer & Lechner Shower gutter to be used in the surface, but without cover, horizontal, length 1300mm, DN 50 [Code number: HL 50F.0/130]
Details 		HL 50F.0/130 125 945 rub

The HL Company produces shower gutter HL 50F.0/130 with PP drain with ball joint DN50 with horizontal outlet. Length is 1300 mm. Height of siphon cartridge is 50 mm. Body of gutter with sanded flange for connection to hydroinsulation. Capacity of shower gutter is 0.8 l/s, and load class is K3 - 300kg. Included adjustable screws pads.

Diameter Size, mm Capacity Load Weight
DN, mm L H min l/s kg gr
50 1300 110 0,8 300 3966
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 4,797 0,0513375

Documentation

Download data sheet: Shower gutter HL 50F.0/130

Download example of product installation:  Shower gutter HL 50F.0/130

Photo Draft
Photo Hutterer & Lechner Shower gutter to be used in the surface, but without cover, horizontal, length 1400mm, DN 50 [Code number: HL 50F.0/140] Draft Hutterer & Lechner Shower gutter to be used in the surface, but without cover, horizontal, length 1400mm, DN 50 [Code number: HL 50F.0/140]
Hutterer & Lechner Shower gutter to be used in the surface, but without cover, horizontal, length 1400mm, DN 50 [Code number: HL 50F.0/140]
Details 		HL 50F.0/140 173 895 rub

The HL Company produces shower gutter HL 50F.0/140 with 2x PP drain with ball joint DN50 with horizontal outlet. Length is 1400 mm. Height of siphon cartridge is 50 mm. Body of gutter with sanded flange for connection to hydroinsulation. Capacity of shower gutter is 0.8 l/s, and load class is K3 - 300kg. Included adjustable screws pads.

Diameter Size, mm LY Capacity Load Weight
DN, mm L H min mm l/s kg gr
50 1400 110 500 1,4 300 5840
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 6,344 0,0513375

Documentation

Download data sheet: Shower gutter HL 50F.0/140

Download example of product installation:  Shower gutter HL 50F.0/140]

© Inrusstrade.ru 1999-2026. "Inrusstrade" Ltd. Copying and quoting is prohibited