Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Lenin Hills

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Наименование Article Цена
Photo Draft
Photo SINIKON Standart Cap, PP, d - 32 [Code number: KO.032] Draft SINIKON Standart Cap, PP, d - 32 [Code number: KO.032]
SINIKON Standart Cap, PP, d - 32 [Code number: KO.032]
Details 		KO.032

Application purposes:

  • For domestic drainage system
  • For plugging dead-end sections of pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d L Weight Colour
mm mm kg  
32 28 0,005 Gray
Photo Draft
Photo SINICON Standard Bend 15°, d - 32, PP [Code number: Kolano 32/15] Draft SINICON Standard Bend 15°, d - 32, PP [Code number: Kolano 32/15]
SINICON Standard Bend 15°, d - 32, PP [Code number: Kolano 32/15]
Details 		Kolano 32/15 146 rub
Photo Draft
Photo SINICON Standard Bend 30°, d - 32, PP (Aquer) [Code number: Kolano 32/30] Draft SINICON Standard Bend 30°, d - 32, PP (Aquer) [Code number: Kolano 32/30]
SINICON Standard Bend 30°, d - 32, PP (Aquer) [Code number: Kolano 32/30]
Details 		Kolano 32/30 146 rub
Photo
Photo SINIKON Standart Bend universal, PP, gray, d - 50 [Code number: KU.050.G] Photo SINIKON Standart Bend universal, PP, gray, d - 50 [Code number: KU.050.G]
1 2
SINIKON Standart Bend universal, PP, gray, d - 50 [Code number: KU.050.G]
Details 		KU.050.G 191 rub

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Colour
mm  
50 Gray
Photo
Photo SINIKON Standart Bend universal, PP, gray, d - 110 [Code number: KU.110.G] Photo SINIKON Standart Bend universal, PP, gray, d - 110 [Code number: KU.110.G]
1 2
SINIKON Standart Bend universal, PP, gray, d - 110 [Code number: KU.110.G]
Details 		KU.110.G 468 rub

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Colour
mm  
110 Gray
Photo Draft
Photo (REMOVED FROM PRODUCTION) - SINIKON Standart Bend 45° for WC, PP, black seal, d - 110 [Code number: PU.110045.B.R] Draft (REMOVED FROM PRODUCTION) - SINIKON Standart Bend 45° for WC, PP, black seal, d - 110 [Code number: PU.110045.B.R]
(REMOVED FROM PRODUCTION) - SINIKON Standart Bend 45° for WC, PP, black seal, d - 110 [Code number: PU.110045.B.R]
Details 		PU.110045.B.R

Application purposes:

  • For WC
  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Weight Colour of seal
mm   kg  
110 45° 0,259 black
Photo Draft
Photo SINIKON Standart Bend 45° for WC, PP, white seal, d - 110 [Code number: PU.110045.W.R] Draft SINIKON Standart Bend 45° for WC, PP, white seal, d - 110 [Code number: PU.110045.W.R]
SINIKON Standart Bend 45° for WC, PP, white seal, d - 110 [Code number: PU.110045.W.R]
Details 		PU.110045.W.R 362 rub

Application purposes:

  • For WC
  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Weight Colour of seal
mm   kg  
110 45° 0,259 white
Photo Draft
Photo (REMOVED FROM PRODUCTION) - SINIKON Standart Bend 90° for WC, PP, black seal, d - 110 [Code number: PU.110090.B.R] Draft (REMOVED FROM PRODUCTION) - SINIKON Standart Bend 90° for WC, PP, black seal, d - 110 [Code number: PU.110090.B.R]
(REMOVED FROM PRODUCTION) - SINIKON Standart Bend 90° for WC, PP, black seal, d - 110 [Code number: PU.110090.B.R]
Details 		PU.110090.B.R
REMOVED FROM PRODUCTION

Application purposes:

  • For WC
  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Weight Colour of seal
mm   kg  
110 90° 0,332 black
Photo Draft
Photo SINIKON Standart Bend 90° for WC, PP, white seal, d - 110 [Code number: PU.110090.W.R] Draft SINIKON Standart Bend 90° for WC, PP, white seal, d - 110 [Code number: PU.110090.W.R]
SINIKON Standart Bend 90° for WC, PP, white seal, d - 110 [Code number: PU.110090.W.R]
Details 		PU.110090.W.R 465 rub

Application purposes:

  • For WC
  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Weight Colour of seal
mm   kg  
110 90° 0,332 white
Photo Draft
Photo SINIKON Standart Rubber reduction, white, d - 32*25 [Code number: RG.32.25] Draft SINIKON Standart Rubber reduction, white, d - 32*25 [Code number: RG.32.25]
SINIKON Standart Rubber reduction, white, d - 32*25 [Code number: RG.32.25]
Details 		RG.32.25 76 rub

Application purposes:

  • For domestic drainage system

Material: rubber

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2
mm mm
32 25
Photo Draft
Photo SINIKON Standart Rubber reduction, white, d - 40*25 [Code number: RG.40.25] Draft SINIKON Standart Rubber reduction, white, d - 40*25 [Code number: RG.40.25]
SINIKON Standart Rubber reduction, white, d - 40*25 [Code number: RG.40.25]
Details 		RG.40.25 90 rub

Application purposes:

  • For domestic drainage system

Material: rubber

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2
mm mm
40 25
Photo Draft
Photo SINIKON Standart Rubber reduction, white, d - 40*32 [Code number: RG.40.32] Draft SINIKON Standart Rubber reduction, white, d - 40*32 [Code number: RG.40.32]
SINIKON Standart Rubber reduction, white, d - 40*32 [Code number: RG.40.32]
Details 		RG.40.32 90 rub

Application purposes:

  • For domestic drainage system

Material: rubber

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2
mm mm
40 32
Photo Draft
Photo SINIKON Standart Reducer, rubber, d - 50*25 [Code number: RG.50.25] Draft SINIKON Standart Reducer, rubber, d - 50*25 [Code number: RG.50.25]
SINIKON Standart Reducer, rubber, d - 50*25 [Code number: RG.50.25]
Details 		RG.50.25 97 rub

Application purposes:

  • For domestic drainage system

Material: rubber

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2
mm mm
50 25
Photo Draft
Photo SINIKON Standart Reducer, rubber, d - 50*32 [Code number: RG.50.32] Draft SINIKON Standart Reducer, rubber, d - 50*32 [Code number: RG.50.32]
SINIKON Standart Reducer, rubber, d - 50*32 [Code number: RG.50.32]
Details 		RG.50.32 97 rub

Application purposes:

  • For domestic drainage system

Material: rubber

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2
mm mm
50 32
Photo Draft
Photo SINIKON Standart Rubber reduction, white, d - 50*40 [Code number: RG.50.40] Draft SINIKON Standart Rubber reduction, white, d - 50*40 [Code number: RG.50.40]
SINIKON Standart Rubber reduction, white, d - 50*40 [Code number: RG.50.40]
Details 		RG.50.40 97 rub

Application purposes:

  • For domestic drainage system

Material: rubber

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2
mm mm
50 40
Photo Draft
Photo SINIKON Standart Rubber reduction, white, d - 56*32 (price on request) [Code number: RG.56.32] Draft SINIKON Standart Rubber reduction, white, d - 56*32 (price on request) [Code number: RG.56.32]
SINIKON Standart Rubber reduction, white, d - 56*32 (price on request) [Code number: RG.56.32]
Details 		RG.56.32

Application purposes:

  • For domestic drainage system

Material: rubber

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2
mm mm
56 32
Photo Draft
Photo SINIKON Standart Rubber reduction, white, d - 56*40 (price on request) [Code number: RG.56.40] Draft SINIKON Standart Rubber reduction, white, d - 56*40 (price on request) [Code number: RG.56.40]
SINIKON Standart Rubber reduction, white, d - 56*40 (price on request) [Code number: RG.56.40]
Details 		RG.56.40

Application purposes:

  • For domestic drainage system

Material: rubber

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2
mm mm
56 40
Photo Draft
Photo SINIKON Standart Eccentric reducer 90°, corner, PP, white, d - 50*32 [Code number: RP.P.050.032] Draft SINIKON Standart Eccentric reducer 90°, corner, PP, white, d - 50*32 [Code number: RP.P.050.032]
SINIKON Standart Eccentric reducer 90°, corner, PP, white, d - 50*32 [Code number: RP.P.050.032]
Details 		RP.P.050.032 99 rub

Application purposes:

  • For domestic drainage system
  • For connecting pipes with different diameters

Material: Polypropylene (PP)

Warranty: 20 years

Type: angular.

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2 Colour
mm mm  
50 32 White/Gray
Photo Draft
Photo Wavin PVC Pressure Pipe systems T-piece flared, d - 63*63*63 [Code number: RRS010063 / 20134009] Draft Wavin PVC Pressure Pipe systems T-piece flared, d - 63*63*63 [Code number: RRS010063 / 20134009]
Wavin PVC Pressure Pipe systems T-piece flared, d - 63*63*63 [Code number: RRS010063 / 20134009]
Details 		RRS010063

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin T-piece flared can be used for installation of pressure piping systems. It is used to combine two branches of the pipeline into one flow. You can see the appearance of T-piece flared and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

D1 D3 B1 Z1 B3 Z3
mm mm mm mm mm mm
63-63-63 - 96 41 - -
Photo Draft
Photo Wavin PVC Pressure Pipe systems T-piece flared, d - 75*63*75 [Code number: RRS010074 / 20137009] Draft Wavin PVC Pressure Pipe systems T-piece flared, d - 75*63*75 [Code number: RRS010074 / 20137009]
Wavin PVC Pressure Pipe systems T-piece flared, d - 75*63*75 [Code number: RRS010074 / 20137009]
Details 		RRS010074

ATTENTION! This product is temporarily unavailable for order!

D1 D3 B1 Z1 B3 Z3
mm mm mm mm mm mm
75-63-75 63 102 48 96 48
© Inrusstrade.ru 1999-2026. "Inrusstrade" Ltd. Copying and quoting is prohibited