When installing internal sewage, special fittings are used that are connected to pipes:
- Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
- Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
- Crosses are used to create two branches (in some cases three) from the main pipeline.
- Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
- Reducers are used to connect sewer pipes with different diameters.
- Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
- Siphons are mounted with sanitary equipment.
- Brackets allow you to rigidly fix the pipeline system.
- Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
![Photo Geberit HDPE Straight adapter with shrink-fitted sleeve, d315, di355 [Code number: 372.550.16.1]](/rails/active_storage/blobs/redirect/eyJfcmFpbHMiOnsibWVzc2FnZSI6IkJBaHBBbG5GIiwiZXhwIjpudWxsLCJwdXIiOiJibG9iX2lkIn19--005fd17d28f62274bd4b4ba39ae5cc8061f7e37f/372.550.16.1-photo.jpg?locale=en)
![Draft Geberit HDPE Straight adapter with shrink-fitted sleeve, d315, di355 [Code number: 372.550.16.1]](/rails/active_storage/blobs/redirect/eyJfcmFpbHMiOnsibWVzc2FnZSI6IkJBaHBBbHJGIiwiZXhwIjpudWxsLCJwdXIiOiJibG9iX2lkIn19--b6bfc92788d8d2a6c83894bdf01ae0148bf5f456/372.550.16.1-draft.jpg?locale=en)