Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Leninsky urban district

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Наименование Article Цена
Photo Draft
Photo SINICON Standard T-piece 87,5°, PP, d - 125, d1 - 110 (on request) [Code number: 510053.R] Draft SINICON Standard T-piece 87,5°, PP, d - 125, d1 - 110 (on request) [Code number: 510053.R]
SINICON Standard T-piece 87,5°, PP, d - 125, d1 - 110 (on request) [Code number: 510053.R]
Details 		510053.R 737 rub

Application purposes:

  • For domestic drainage system
  • For branching the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Colour
mm    
125x110 87,5˚ Gray
Photo
Photo SINIKON Universal T-piece 45°, PP, d - 160, d1 - 110 [Code number: 510061.U]
SINIKON Universal T-piece 45°, PP, d - 160, d1 - 110 [Code number: 510061.U]
Details 		510061.U 946 rub

Application purposes:

  • For domestic drainage system
  • For outdoor drainage system
  • For storm water drainage system
  • For branching the pipeline

Material: homopolymer of propylene PP-H

Warranty: 20 years

Maximum continuous temperature of waste water: +80 °С

Maximum short-term of waste water: +95 °С

Service life: not less than 50 years

The main advantages of the SINIKON Universal system:

  • High chemical resistance
  • Corrosion resistance
  • Does not conduct electricity
  • Tightness of connections
  • Low roughness coefficient
  • Resistance to hydroabrasive wear
  • Resistance to impact (including at low temperatures)
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d Angle Colour
mm    
160*110 45° brown
Photo Draft
Photo SINIKON Universal T-piece 87°, PP, d - 160, d1 - 110 [Code number: 510065.U] Draft SINIKON Universal T-piece 87°, PP, d - 160, d1 - 110 [Code number: 510065.U]
SINIKON Universal T-piece 87°, PP, d - 160, d1 - 110 [Code number: 510065.U]
Details 		510065.U 946 rub

Application purposes:

  • For domestic drainage system
  • For outdoor drainage system
  • For storm water drainage system
  • For branching the pipeline

Material: homopolymer of propylene PP-H

Warranty: 20 years

Maximum continuous temperature of waste water: +80 °С

Maximum short-term of waste water: +95 °С

Service life: not less than 50 years

The main advantages of the SINIKON Universal system:

  • High chemical resistance
  • Corrosion resistance
  • Does not conduct electricity
  • Tightness of connections
  • Low roughness coefficient
  • Resistance to hydroabrasive wear
  • Resistance to impact (including at low temperatures)
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d Angle Colour
mm    
160*110 87° brown
Photo Draft
Photo SINIKON Standart Corner branch fitting 67°, PP, d - 110*110*110 [Code number: 512001] Draft SINIKON Standart Corner branch fitting 67°, PP, d - 110*110*110 [Code number: 512001]
SINIKON Standart Corner branch fitting 67°, PP, d - 110*110*110 [Code number: 512001]
Details 		512001 1 163 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years

Rule for determining the execution (right or left) of two-plane crosses D110x110x50:

when holding the cross in the working position, with the socket up, and when the socket D110mm is directed towards you, the position of the socket D50mm on the right or left determines the execution of the cross.

d d1 d2 Angle Weight Colour
mm mm mm   kg  
110 110 110 67° 0,440 Gray
Photo Draft
Photo SINIKON Standart Corner branch fitting 67°, left, PP, d - 110*50*110 [Code number: 512003] Draft SINIKON Standart Corner branch fitting 67°, left, PP, d - 110*50*110 [Code number: 512003]
SINIKON Standart Corner branch fitting 67°, left, PP, d - 110*50*110 [Code number: 512003]
Details 		512003 3 014 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years

Rule for determining the execution (right or left) of two-plane crosses D110x110x50:

when holding the cross in the working position, with the socket up, and when the socket D110mm is directed towards you, the position of the socket D50mm on the right or left determines the execution of the cross.

d d1 d2 Angle Weight Colour
mm mm mm   kg  
110 50 110 67° 0,360 Gray
Photo Draft
Photo SINIKON Standart Corner branch fitting 67°, right, PP, d - 110*110*50 [Code number: 512005] Draft SINIKON Standart Corner branch fitting 67°, right, PP, d - 110*110*50 [Code number: 512005]
SINIKON Standart Corner branch fitting 67°, right, PP, d - 110*110*50 [Code number: 512005]
Details 		512005 3 014 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years

Rule for determining the execution (right or left) of two-plane crosses D110x110x50:

when holding the cross in the working position, with the socket up, and when the socket D110mm is directed towards you, the position of the socket D50mm on the right or left determines the execution of the cross.

d d1 d2 Angle Weight Colour
mm mm mm   kg  
110 110 50 67° 0,360 Gray
Photo Draft
Photo SINIKON Standart Corner branch fitting 67°, PP, d - 110*50*50 [Code number: 512007] Draft SINIKON Standart Corner branch fitting 67°, PP, d - 110*50*50 [Code number: 512007]
SINIKON Standart Corner branch fitting 67°, PP, d - 110*50*50 [Code number: 512007]
Details 		512007 3 014 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years

Maximum working temperature: +90 °С

Rule for determining the execution (right or left) of two-plane crosses D110x110x50:

when holding the cross in the working position, with the socket up, and when the socket D110mm is directed towards you, the position of the socket D50mm on the right or left determines the execution of the cross.

d d1 d2 Angle Weight Colour
mm mm mm   kg  
110 50 50 67° 0,240 Gray
Photo Draft
Photo SINIKON Comfort Plus Corner branch fitting 87°, left, PP, d - 110*110*50 [Code number: 512033.K] Draft SINIKON Comfort Plus Corner branch fitting 87°, left, PP, d - 110*110*50 [Code number: 512033.K]
SINIKON Comfort Plus Corner branch fitting 87°, left, PP, d - 110*110*50 [Code number: 512033.K]
Details 		512033.K 903 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Outlet: left

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d d2 d3 Angle Wall thickness Colour
mm mm mm   mm  
110 110 50 87° 2,7 white
Photo Draft
Photo SINIKON Standart Corner branch fitting 87°, left, PP, d - 110*110*50 [Code number: 512033.R] Draft SINIKON Standart Corner branch fitting 87°, left, PP, d - 110*110*50 [Code number: 512033.R]
SINIKON Standart Corner branch fitting 87°, left, PP, d - 110*110*50 [Code number: 512033.R]
Details 		512033.R 644 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years

Rule for determining the execution (right or left) of two-plane crosses D110x110x50:

when holding the cross in the working position, with the socket up, and when the socket D110mm is directed towards you, the position of the socket D50mm on the right or left determines the execution of the cross.

d d1 d2 Angle Weight Colour
mm mm mm   kg  
110 50 110 87° 0,400 Gray
Photo Draft
Photo SINIKON Comfort Plus Corner branch fitting 87°, right, PP, d - 110*110*50 [Code number: 512035.K] Draft SINIKON Comfort Plus Corner branch fitting 87°, right, PP, d - 110*110*50 [Code number: 512035.K]
SINIKON Comfort Plus Corner branch fitting 87°, right, PP, d - 110*110*50 [Code number: 512035.K]
Details 		512035.K 903 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Outlet: right

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d d2 d3 Angle Wall thickness Colour
mm mm mm   mm  
110 110 50 87° 2,7 white
Photo Draft
Photo SINIKON Standart Corner branch fitting 87°, right, PP, d - 110*110*50 [Code number: 512035.R] Draft SINIKON Standart Corner branch fitting 87°, right, PP, d - 110*110*50 [Code number: 512035.R]
SINIKON Standart Corner branch fitting 87°, right, PP, d - 110*110*50 [Code number: 512035.R]
Details 		512035.R 644 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years

Rule for determining the execution (right or left) of two-plane crosses D110x110x50:

when holding the cross in the working position, with the socket up, and when the socket D110mm is directed towards you, the position of the socket D50mm on the right or left determines the execution of the cross.

d d1 d2 Angle Weight Colour
mm mm mm   kg  
110 110 50 87° 0,400 Gray
Photo Draft
Photo SINIKON Comfort Plus Double-sided branch fitting 87°, PP, d - 110, d1 - 110, d2 - 50 [Code number: 512037.K] Photo SINIKON Comfort Plus Double-sided branch fitting 87°, PP, d - 110, d1 - 110, d2 - 50 [Code number: 512037.K] Draft SINIKON Comfort Plus Double-sided branch fitting 87°, PP, d - 110, d1 - 110, d2 - 50 [Code number: 512037.K]
SINIKON Comfort Plus Double-sided branch fitting 87°, PP, d - 110, d1 - 110, d2 - 50 [Code number: 512037.K]
Details 		512037.K 990 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements
  • For connecting pipeline branches on both sides

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d d2 d3 Angle Wall thickness Colour
mm mm mm   mm  
110 110 50 87° 2,7 white
Photo Draft
Photo SINIKON Standart Double-sided branch fitting 87°, PP, d - 110*110*50 [Code number: 512037.R] Draft SINIKON Standart Double-sided branch fitting 87°, PP, d - 110*110*50 [Code number: 512037.R]
SINIKON Standart Double-sided branch fitting 87°, PP, d - 110*110*50 [Code number: 512037.R]
Details 		512037.R 708 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years

Rule for determining the execution (right or left) of two-plane crosses D110x110x50:

when holding the cross in the working position, with the socket up, and when the socket D110mm is directed towards you, the position of the socket D50mm on the right or left determines the execution of the cross.

d d1 d2 Angle L Colour
mm mm mm   mm  
110 110 50 87° 252 Gray
Photo Draft
Photo SINIKON Comfort Plus Corner branch 87˚, PP, d - 110/110/110 [Code number: 512041.K] Draft SINIKON Comfort Plus Corner branch 87˚, PP, d - 110/110/110 [Code number: 512041.K]
SINIKON Comfort Plus Corner branch 87˚, PP, d - 110/110/110 [Code number: 512041.K]
Details 		512041.K 991 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d d2 d3 Angle Wall thickness Colour
mm mm mm   mm  
110 110 110 87° 2,7 white
Photo Draft
Photo SINIKON Standart Corner branch fitting 87°, PP, d - 110х110х110 [Code number: 512041.R] Draft SINIKON Standart Corner branch fitting 87°, PP, d - 110х110х110 [Code number: 512041.R]
SINIKON Standart Corner branch fitting 87°, PP, d - 110х110х110 [Code number: 512041.R]
Details 		512041.R 708 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years

Rule for determining the execution (right or left) of two-plane crosses D110x110x50:

when holding the cross in the working position, with the socket up, and when the socket D110mm is directed towards you, the position of the socket D50mm on the right or left determines the execution of the cross.

d d1 d2 Angle Colour
mm mm mm    
110 110 110 87˚ Gray
Photo Draft
Photo SINIKON Comfort Plus Straight reducer, PP, d - 50*40 [Code number: 513001.K] Draft SINIKON Comfort Plus Straight reducer, PP, d - 50*40 [Code number: 513001.K]
SINIKON Comfort Plus Straight reducer, PP, d - 50*40 [Code number: 513001.K]
Details 		513001.K 84 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d d2 Colour
mm mm  
50 40 white
Photo Draft
Photo SINIKON Standart Reducer, PP, d - 50*40 [Code number: 513001.R] Draft SINIKON Standart Reducer, PP, d - 50*40 [Code number: 513001.R]
SINIKON Standart Reducer, PP, d - 50*40 [Code number: 513001.R]
Details 		513001.R 60 rub

Application purposes:

  • For domestic drainage system
  • For connecting pipes with different diameters

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d L Weight Colour
mm mm kg  
50/40 57 0,025 Gray
Photo Draft
Photo СИНИКОН Comfort Plus Straight reducer, d - 50, d1 - 32, ПП, (50 pcs per package) [Code number: 513002.K] Draft СИНИКОН Comfort Plus Straight reducer, d - 50, d1 - 32, ПП, (50 pcs per package) [Code number: 513002.K]
СИНИКОН Comfort Plus Straight reducer, d - 50, d1 - 32, ПП, (50 pcs per package) [Code number: 513002.K]
Details 		513002.K 101 rub
Photo Draft
Photo SINIKON Standart Reducer, PP, d - 50*32 [Code number: 513002.R] Draft SINIKON Standart Reducer, PP, d - 50*32 [Code number: 513002.R]
SINIKON Standart Reducer, PP, d - 50*32 [Code number: 513002.R]
Details 		513002.R 72 rub

Application purposes:

  • For domestic drainage system
  • For connecting pipes with different diameters

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d L Weight Colour
mm mm kg  
50/32 55 0,025 Gray
Photo
Photo SINICON Standard Reducer, d - 40, d1 - 32, PP [Code number: 514000.R]
SINICON Standard Reducer, d - 40, d1 - 32, PP [Code number: 514000.R]
Details 		514000.R 76 rub
© Inrusstrade.ru 1999-2026. "Inrusstrade" Ltd. Copying and quoting is prohibited

Privacy policy