Fittings for domestic sewerage

Watch products by Brands

When installing internal sewage, special fittings are used that are connected to pipes:

Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
Crosses are used to create two branches (in some cases three) from the main pipeline.
Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
Reducers are used to connect sewer pipes with different diameters.
Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
Siphons are mounted with sanitary equipment.
Brackets allow you to rigidly fix the pipeline system.
Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.

Photo Наименование Article Цена

SINIKON Standart Access pipe, PP, d - 110 [Code number: 516007.R]

Details

516007.R

329 rub

Application purposes:

For domestic drainage system
For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

Smooth inner surface
Corrosion resistance
Tightness of connections
Frost resistance
Low weight
Economy
Easy installation
Lifetime at least 50 years

d	Dc	Weight	Colour
mm	mm	kg
110	115	0,370	Gray

SINIKON Universal Access pipe for outdoor sewage, PP, d - 110 [Code number: 516007.U]

Details

516007.U

402 rub

Application purposes:

For domestic drainage system
For outdoor drainage system
For storm water drainage system
For pipeline inspection

Material: homopolymer of propylene PP-H

Warranty: 20 years

Maximum continuous temperature of waste water: +80 °С

Maximum short-term of waste water: +95 °С

Service life: not less than 50 years

The main advantages of the SINIKON Universal system:

High chemical resistance
Corrosion resistance
Does not conduct electricity
Tightness of connections
Low roughness coefficient
Resistance to hydroabrasive wear
Resistance to impact (including at low temperatures)
Ease of installation
Service life - at least 50 years

Technical specifications

d	Colour
mm
110	brown

SINICON Standard Access pipe, PP, d - 125 [Code number: 516009.R]

Details

516009.R

1 369 rub

Application purposes:

For domestic drainage system
For pipeline inspection

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

Smooth inner surface
Corrosion resistance
Tightness of connections
Frost resistance
Low weight
Economy
Easy installation
Lifetime at least 50 years

d	Colour
mm
125	Gray

SINIKON Universal Access pipe, PP, d - 160 [Code number: 516011.U]

Details

516011.U

1 392 rub

Application purposes:

For domestic drainage system
For outdoor drainage system
For storm water drainage system
For pipeline inspection

Material: homopolymer of propylene PP-H

Warranty: 20 years

Maximum continuous temperature of waste water: +80 °С

Maximum short-term of waste water: +95 °С

Ring stiffness: 4 kN/m2

Service life: not less than 50 years

The main advantages of the SINIKON Universal system:

High chemical resistance
Corrosion resistance
Does not conduct electricity
Tightness of connections
Low roughness coefficient
Resistance to hydroabrasive wear
Resistance to impact (including at low temperatures)
Ease of installation
Service life - at least 50 years

Technical specifications

d	Colour
mm
160	brown

РТП BETA Super-compact adapter, d - 110, d1 - 90, for gravity internal sewerage, PP, gray, (12 pcs per package) [Code number: 51789 (RTP)]

Details

51789 (RTP)

714 rub

РТП BETA Corner adapter, d - 40, 2 fittings, for gravity internal sewerage, PP, gray, (10 pcs per package) [Code number: 51790 (RTP)]

Details

51790 (RTP)

971 rub

РТП BETA Corner adapter, d - 50, 2 fittings, for gravity internal sewerage, PP, gray, (10 pcs per package) [Code number: 51791 (RTP)]

Details

51791 (RTP)

971 rub

Ostendorf HT Bend 87° HTBR reducer, white, PP, d - 32, d1 - 50 [Code number: 521412]

Details

521412

201 rub

Application purpose:

For drainage systems
For rainwater systems
For ventilation systems

System characteristics:

Low noise level;
Resistance to corrosion and chemicals;
Flammability;
Simple and fast installation;
Long service life and warranty.

Colour: white

Material: Polypropylene.

Diameter: 32 - 50 mm

Download the installation instructions of product: HT bend

Chemical resistance of: HT system

SINICON Comfort Plus Cap, d - 32, (20 pcs per package) [Code number: 524000.K]

Details

524000.K

26 rub

SINICON Standard Cap, d - 32 [Code number: 524000.R]

Details

524000.R

19 rub

Application purposes:

For domestic drainage system
For plugging dead-end sections of pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

Smooth inner surface
Corrosion resistance
Tightness of connections
Frost resistance
Low weight
Economy
Easy installation
Lifetime at least 50 years

d	L	Weight	Colour
mm	mm	kg
32	28	0,005	Gray

SINIKON Comfort Plus Cap, PP, d - 40 [Code number: 524001.K]

Details

524001.K

43 rub

Application purposes:

For domestic drainage system
For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

Reduced noise level
Resistance to silting
Resistance to corrosion
Tightness of connections
Ease of installation
Service life - at least 50 years

Technical specifications

d	Colour
mm
40	white

SINIKON Standart Cap, PP, d - 40 [Code number: 524001.R]

Details

524001.R

31 rub

Application purposes:

For domestic drainage system
For plugging dead-end sections of pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

Smooth inner surface
Corrosion resistance
Tightness of connections
Frost resistance
Low weight
Economy
Easy installation
Lifetime at least 50 years

d	L	Weight	Colour
mm	mm	kg
40	28	0,012	Gray

SINIKON Comfort Plus Cap, PP, d - 50 [Code number: 524003.K]

Details

524003.K

46 rub

Application purposes:

For domestic drainage system
For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

Reduced noise level
Resistance to silting
Resistance to corrosion
Tightness of connections
Ease of installation
Service life - at least 50 years

Technical specifications

d	Colour
mm
50	white

SINIKON Standart Cap, PP, d - 50 [Code number: 524003.R]

Details

524003.R

33 rub

Application purposes:

For domestic drainage system
For plugging dead-end sections of pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

Smooth inner surface
Corrosion resistance
Tightness of connections
Frost resistance
Low weight
Economy
Easy installation
Lifetime at least 50 years

d	L	Weight	Colour
mm	mm	kg
50	28	0,014	Gray

SINIKON Standart Cap, PP, D75 [Code number: 524005CR]

Details

524005CR

114 rub

Application purposes:

For domestic drainage system
For plugging dead-end sections of pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

Smooth inner surface
Corrosion resistance
Tightness of connections
Frost resistance
Low weight
Economy
Easy installation
Lifetime at least 50 years

d	L	Weight	Colour
mm	mm	kg
75	-	0,028	Gray

(REPLACEMENT: 524005.C) - SINIKON Standart Cap, PP, D75 [Code number: 524005.R]

Details

524005.R

46 rub

REPLACEMENT: 524005.C

Application purposes:

For domestic drainage system
For plugging dead-end sections of pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

Smooth inner surface
Corrosion resistance
Tightness of connections
Frost resistance
Low weight
Economy
Easy installation
Lifetime at least 50 years

d	L	Weight	Colour
mm	mm	kg
75	-	0,028	Gray

SINIKON Comfort Plus Cap, PP, d - 110 [Code number: 524007.K]

Details

524007.K

82 rub

Application purposes:

For domestic drainage system
For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

Reduced noise level
Resistance to silting
Resistance to corrosion
Tightness of connections
Ease of installation
Service life - at least 50 years

Technical specifications

d	Colour
mm
110	white

SINIKON Standart Cap, PP, d - 110 [Code number: 524007.R]

Details

524007.R

59 rub

Application purposes:

For domestic drainage system
For plugging dead-end sections of pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

Smooth inner surface
Corrosion resistance
Tightness of connections
Frost resistance
Low weight
Economy
Easy installation
Lifetime at least 50 years

d	L	Weight	Colour
mm	mm	kg
110	32	0,066	Gray

SINIKON Universal Cap for outdoor sewage, PP, d - 110 [Code number: 524007.U]

Details

524007.U

78 rub

Application purposes:

For domestic drainage system
For outdoor drainage system
For storm water drainage system
For closing of pipeline dead ends

Material: homopolymer of propylene PP-H

Warranty: 20 years

Maximum continuous temperature of waste water: +80 °С

Maximum short-term of waste water: +95 °С

Service life: not less than 50 years

The main advantages of the SINIKON Universal system:

High chemical resistance
Corrosion resistance
Does not conduct electricity
Tightness of connections
Low roughness coefficient
Resistance to hydroabrasive wear
Resistance to impact (including at low temperatures)
Ease of installation
Service life - at least 50 years

Technical specifications

d	Colour
mm
110	brown

SINICON Universal Plug, PP, d - 160 [Code number: 524011.U]

Details

524011.U

139 rub

Application purposes:

For domestic drainage system
For outdoor drainage system
For storm water drainage system
For closing of pipeline dead ends

Material: homopolymer of propylene PP-H

Warranty: 20 years

Maximum continuous temperature of waste water: +80 °С

Maximum short-term of waste water: +95 °С

Service life: not less than 50 years

The main advantages of the SINIKON Universal system:

High chemical resistance
Corrosion resistance
Does not conduct electricity
Tightness of connections
Low roughness coefficient
Resistance to hydroabrasive wear
Resistance to impact (including at low temperatures)
Ease of installation
Service life - at least 50 years

Technical specifications

d	Colour
mm
160	brown