Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Lenin Hills

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Наименование Article Цена
Photo Draft
Photo SINIKON Standart T-piece 87°, PP, PP, d - 110*40 [Code number: 510029] Draft SINIKON Standart T-piece 87°, PP, PP, d - 110*40 [Code number: 510029]
SINIKON Standart T-piece 87°, PP, PP, d - 110*40 [Code number: 510029]
Details 		510029 517 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2 Angle Weight Colour
mm mm   kg  
110 40 87° 0,105 Gray
Photo Draft
Photo SINIKON Comfort Plus T-piece 45°, PP, d - 110*50 [Code number: 510031.K] Draft SINIKON Comfort Plus T-piece 45°, PP, d - 110*50 [Code number: 510031.K]
SINIKON Comfort Plus T-piece 45°, PP, d - 110*50 [Code number: 510031.K]
Details 		510031.K 273 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d d2 Angle Wall thickness Colour
mm mm   mm  
110 50 45° 2,7 white
Photo Draft
Photo SINIKON Standart T-piece 45°, PP, d - 110*50 [Code number: 510031.R] Draft SINIKON Standart T-piece 45°, PP, d - 110*50 [Code number: 510031.R]
SINIKON Standart T-piece 45°, PP, d - 110*50 [Code number: 510031.R]
Details 		510031.R 195 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2 Angle Weight Colour
mm mm   kg  
110 50 45° 0,250 Gray
Photo Draft
Photo SINIKON Standart T-piece 67°, PP, PP, d - 110*50 [Code number: 510033] Draft SINIKON Standart T-piece 67°, PP, PP, d - 110*50 [Code number: 510033]
SINIKON Standart T-piece 67°, PP, PP, d - 110*50 [Code number: 510033]
Details 		510033 259 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2 Angle Weight Colour
mm mm   kg  
110 50 67° 0,235 Gray
Photo Draft
Photo SINIKON Comfort Plus T-piece 87°, PP, d - 110*50 [Code number: 510035.K] Draft SINIKON Comfort Plus T-piece 87°, PP, d - 110*50 [Code number: 510035.K]
SINIKON Comfort Plus T-piece 87°, PP, d - 110*50 [Code number: 510035.K]
Details 		510035.K 273 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Reinforced fitting with increased wall thickness.

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d d2 Angle Wall thickness Colour
mm mm   mm  
110 50 87° 3,4 white
Photo Draft
Photo SINIKON Standart T-piece 87°, PP, d - 110*50 [Code number: 510035.R] Draft SINIKON Standart T-piece 87°, PP, d - 110*50 [Code number: 510035.R]
SINIKON Standart T-piece 87°, PP, d - 110*50 [Code number: 510035.R]
Details 		510035.R 195 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2 Angle Weight Colour
mm mm   kg  
110 50 87° 0,230 Gray
Photo Draft
Photo (PART NUMBER REPLACED TO: 510037CR) - SINIKON Standart T-piece 45˚, PP, d - 110x75 [Code number: 510037.C] Draft (PART NUMBER REPLACED TO: 510037CR) - SINIKON Standart T-piece 45˚, PP, d - 110x75 [Code number: 510037.C]
(PART NUMBER REPLACED TO: 510037CR) - SINIKON Standart T-piece 45˚, PP, d - 110x75 [Code number: 510037.C]
Details 		510037.C

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 Angle Colour
mm mm    
110 75 45˚ Gray
Photo Draft
Photo SINIKON Standart T-piece 45˚, PP, d - 110, d1 - 75 [Code number: 510037CR] Draft SINIKON Standart T-piece 45˚, PP, d - 110, d1 - 75 [Code number: 510037CR]
SINIKON Standart T-piece 45˚, PP, d - 110, d1 - 75 [Code number: 510037CR]
Details 		510037CR 479 rub

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: PP-H polypropylene.

Material density: 0.9-0.95 g/cm3.

Maximum operating temperature: +80 °C (short-term up to +95 °C).

Melting point: +160 °С.

Main advantages of the SINIKON Standard system:

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Colour
mm    
110x75 45˚ Metallic grey
Photo Draft
Photo (REPLACEMENT: 510037.C) - SINIKON Standart T-piece 45°, PP, d - 110x75 [Code number: 510037.R] Draft (REPLACEMENT: 510037.C) - SINIKON Standart T-piece 45°, PP, d - 110x75 [Code number: 510037.R]
(REPLACEMENT: 510037.C) - SINIKON Standart T-piece 45°, PP, d - 110x75 [Code number: 510037.R]
Details 		510037.R
REPLACEMENT: 510037.C

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2 Angle Weight Colour
mm mm   kg  
110 75 45° 0.266 Gray
Photo Draft
Photo SINIKON Standart T-piece 67˚, PP, d - 110x75 [Code number: 510039.C] Draft SINIKON Standart T-piece 67˚, PP, d - 110x75 [Code number: 510039.C]
SINIKON Standart T-piece 67˚, PP, d - 110x75 [Code number: 510039.C]
Details 		510039.C 340 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 Angle Colour
mm mm    
110 75 67˚ Gray
Photo Draft
Photo (REPLACEMENT: 510039.C) - SINIKON Standart T-piece 67°, PP, d - 110x75 [Code number: 510039.R] Draft (REPLACEMENT: 510039.C) - SINIKON Standart T-piece 67°, PP, d - 110x75 [Code number: 510039.R]
(REPLACEMENT: 510039.C) - SINIKON Standart T-piece 67°, PP, d - 110x75 [Code number: 510039.R]
Details 		510039.R
REPLACEMENT: 510039.C

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2 Angle Weight Colour
mm mm   kg  
110 75 67° 0,242 Gray
Photo Draft
Photo (PART NUMBER REPLACED TO: 510041CR] -SINIKON Standart T-piece 87˚, PP, d - 110x75 [Code number: 510041.C] Draft (PART NUMBER REPLACED TO: 510041CR] -SINIKON Standart T-piece 87˚, PP, d - 110x75 [Code number: 510041.C]
(PART NUMBER REPLACED TO: 510041CR] -SINIKON Standart T-piece 87˚, PP, d - 110x75 [Code number: 510041.C]
Details 		510041.C 428 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 Angle Colour
mm mm    
110 75 87˚ Gray
Photo Draft
Photo SINICON Standard T-piece 87°, PP, d - 110, d1 - 75 [Code number: 510041CR] Draft SINICON Standard T-piece 87°, PP, d - 110, d1 - 75 [Code number: 510041CR]
SINICON Standard T-piece 87°, PP, d - 110, d1 - 75 [Code number: 510041CR]
Details 		510041CR 479 rub

Application purposes:

  • For domestic drainage system
  • For branching the pipeline

Material: PP-H polypropylene.

Material density: 0.9-0.95 g/cm3.

Maximum operating temperature: +80 °C (short-term up to +95 °C).

Melting point: +160 °С.

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Colour
mm    
110x75 87˚ Gray
Photo Draft
Photo (REPLACEMENT: 510041.C) - SINIKON Standart T-piece 87°, PP, d - 110x75 [Code number: 510041.R] Draft (REPLACEMENT: 510041.C) - SINIKON Standart T-piece 87°, PP, d - 110x75 [Code number: 510041.R]
(REPLACEMENT: 510041.C) - SINIKON Standart T-piece 87°, PP, d - 110x75 [Code number: 510041.R]
Details 		510041.R
REPLACEMENT: 510041.C

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2 Angle Weight Colour
mm mm   kg  
110 75 87° 0,226 Gray
Photo Draft
Photo SINICON Standard T-piece 45°, PP, d - 125, d1 - 110 [Code number: 510049.R] Draft SINICON Standard T-piece 45°, PP, d - 125, d1 - 110 [Code number: 510049.R]
SINICON Standard T-piece 45°, PP, d - 125, d1 - 110 [Code number: 510049.R]
Details 		510049.R 693 rub

Application purposes:

  • For domestic drainage system
  • For branching the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Colour
mm    
125x110 45˚ Gray
Photo Draft
Photo SINICON Standard T-piece 87,5°, PP, d - 125, d1 - 110 (on request) [Code number: 510053.R] Draft SINICON Standard T-piece 87,5°, PP, d - 125, d1 - 110 (on request) [Code number: 510053.R]
SINICON Standard T-piece 87,5°, PP, d - 125, d1 - 110 (on request) [Code number: 510053.R]
Details 		510053.R 737 rub

Application purposes:

  • For domestic drainage system
  • For branching the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Colour
mm    
125x110 87,5˚ Gray
Photo
Photo SINIKON Universal T-piece 45°, PP, d - 160, d1 - 110 [Code number: 510061.U]
SINIKON Universal T-piece 45°, PP, d - 160, d1 - 110 [Code number: 510061.U]
Details 		510061.U 827 rub

Application purposes:

  • For domestic drainage system
  • For outdoor drainage system
  • For storm water drainage system
  • For branching the pipeline

Material: homopolymer of propylene PP-H

Warranty: 20 years

Maximum continuous temperature of waste water: +80 °С

Maximum short-term of waste water: +95 °С

Service life: not less than 50 years

The main advantages of the SINIKON Universal system:

  • High chemical resistance
  • Corrosion resistance
  • Does not conduct electricity
  • Tightness of connections
  • Low roughness coefficient
  • Resistance to hydroabrasive wear
  • Resistance to impact (including at low temperatures)
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d Angle Colour
mm    
160*110 45° brown
Photo Draft
Photo SINIKON Universal T-piece 87°, PP, d - 160, d1 - 110 [Code number: 510065.U] Draft SINIKON Universal T-piece 87°, PP, d - 160, d1 - 110 [Code number: 510065.U]
SINIKON Universal T-piece 87°, PP, d - 160, d1 - 110 [Code number: 510065.U]
Details 		510065.U 827 rub

Application purposes:

  • For domestic drainage system
  • For outdoor drainage system
  • For storm water drainage system
  • For branching the pipeline

Material: homopolymer of propylene PP-H

Warranty: 20 years

Maximum continuous temperature of waste water: +80 °С

Maximum short-term of waste water: +95 °С

Service life: not less than 50 years

The main advantages of the SINIKON Universal system:

  • High chemical resistance
  • Corrosion resistance
  • Does not conduct electricity
  • Tightness of connections
  • Low roughness coefficient
  • Resistance to hydroabrasive wear
  • Resistance to impact (including at low temperatures)
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d Angle Colour
mm    
160*110 87° brown
Photo Draft
Photo SINIKON Standart Corner branch fitting 67°, PP, d - 110*110*110 [Code number: 512001] Draft SINIKON Standart Corner branch fitting 67°, PP, d - 110*110*110 [Code number: 512001]
SINIKON Standart Corner branch fitting 67°, PP, d - 110*110*110 [Code number: 512001]
Details 		512001 1 057 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years

Rule for determining the execution (right or left) of two-plane crosses D110x110x50:

when holding the cross in the working position, with the socket up, and when the socket D110mm is directed towards you, the position of the socket D50mm on the right or left determines the execution of the cross.

d d1 d2 Angle Weight Colour
mm mm mm   kg  
110 110 110 67° 0,440 Gray
Photo Draft
Photo SINIKON Standart Corner branch fitting 67°, left, PP, d - 110*50*110 [Code number: 512003] Draft SINIKON Standart Corner branch fitting 67°, left, PP, d - 110*50*110 [Code number: 512003]
SINIKON Standart Corner branch fitting 67°, left, PP, d - 110*50*110 [Code number: 512003]
Details 		512003 2 740 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years

Rule for determining the execution (right or left) of two-plane crosses D110x110x50:

when holding the cross in the working position, with the socket up, and when the socket D110mm is directed towards you, the position of the socket D50mm on the right or left determines the execution of the cross.

d d1 d2 Angle Weight Colour
mm mm mm   kg  
110 50 110 67° 0,360 Gray
© Inrusstrade.ru 1999-2026. "Inrusstrade" Ltd. Copying and quoting is prohibited