Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Lenin Hills

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Наименование Article Цена
Photo Draft
Photo SINIKON Standart Access pipe, PP, d - 50 [Code number: 516003.R] Draft SINIKON Standart Access pipe, PP, d - 50 [Code number: 516003.R]
SINIKON Standart Access pipe, PP, d - 50 [Code number: 516003.R]
Details 		516003.R 154 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Dc Weight Colour
mm mm kg  
50 90 0,110 Gray
Photo Draft
Photo SINIKON Standart Access pipe, PP, D75 [Code number: 516005.C] Draft SINIKON Standart Access pipe, PP, D75 [Code number: 516005.C]
SINIKON Standart Access pipe, PP, D75 [Code number: 516005.C]
Details 		516005.C 311 rub

Application purposes:

  • For domestic drainage system
  • For pipeline inspection

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Colour
mm  
75 Gray
Photo Draft
Photo (REPLACEMENT: 516005.C) - SINIKON Standart Access pipe, PP, D75 [Code number: 516005.R] Draft (REPLACEMENT: 516005.C) - SINIKON Standart Access pipe, PP, D75 [Code number: 516005.R]
(REPLACEMENT: 516005.C) - SINIKON Standart Access pipe, PP, D75 [Code number: 516005.R]
Details 		516005.R
REPLACEMENT: 516005.C

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Dc Weight Colour
mm mm kg  
75 - 0,132 Gray
Photo Draft
Photo SINIKON Comfort Plus Access pipe, PP, d - 110 [Code number: 516007.K] Draft SINIKON Comfort Plus Access pipe, PP, d - 110 [Code number: 516007.K]
SINIKON Comfort Plus Access pipe, PP, d - 110 [Code number: 516007.K]
Details 		516007.K 397 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Reinforced fitting with increased wall thickness.

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d Wall thickness Colour
mm mm  
110 3,4 white
Photo Draft
Photo SINIKON Standart Access pipe, PP, d - 110 [Code number: 516007.R] Draft SINIKON Standart Access pipe, PP, d - 110 [Code number: 516007.R]
SINIKON Standart Access pipe, PP, d - 110 [Code number: 516007.R]
Details 		516007.R 283 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Dc Weight Colour
mm mm kg  
110 115 0,370 Gray
Photo Draft
Photo SINIKON Universal Access pipe for outdoor sewage, PP, d - 110 [Code number: 516007.U] Draft SINIKON Universal Access pipe for outdoor sewage, PP, d - 110 [Code number: 516007.U]
SINIKON Universal Access pipe for outdoor sewage, PP, d - 110 [Code number: 516007.U]
Details 		516007.U 345 rub

Application purposes:

  • For domestic drainage system
  • For outdoor drainage system
  • For storm water drainage system
  • For pipeline inspection

Material: homopolymer of propylene PP-H

Warranty: 20 years

Maximum continuous temperature of waste water: +80 °С

Maximum short-term of waste water: +95 °С

Service life: not less than 50 years

The main advantages of the SINIKON Universal system:

  • High chemical resistance
  • Corrosion resistance
  • Does not conduct electricity
  • Tightness of connections
  • Low roughness coefficient
  • Resistance to hydroabrasive wear
  • Resistance to impact (including at low temperatures)
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d Colour
mm  
110 brown
Photo Draft
Photo SINICON Standard Access pipe, PP, d - 125 [Code number: 516009.R] Draft SINICON Standard Access pipe, PP, d - 125 [Code number: 516009.R]
SINICON Standard Access pipe, PP, d - 125 [Code number: 516009.R]
Details 		516009.R 1 177 rub

Application purposes:

  • For domestic drainage system
  • For pipeline inspection

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Colour
mm  
125 Gray
Photo Draft
Photo SINIKON Universal Access pipe, PP, d - 160 [Code number: 516011.U] Draft SINIKON Universal Access pipe, PP, d - 160 [Code number: 516011.U]
SINIKON Universal Access pipe, PP, d - 160 [Code number: 516011.U]
Details 		516011.U 1 196 rub

Application purposes:

  • For domestic drainage system
  • For outdoor drainage system
  • For storm water drainage system
  • For pipeline inspection

Material: homopolymer of propylene PP-H

Warranty: 20 years

Maximum continuous temperature of waste water: +80 °С

Maximum short-term of waste water: +95 °С

Ring stiffness: 4 kN/m2

Service life: not less than 50 years

The main advantages of the SINIKON Universal system:

  • High chemical resistance
  • Corrosion resistance
  • Does not conduct electricity
  • Tightness of connections
  • Low roughness coefficient
  • Resistance to hydroabrasive wear
  • Resistance to impact (including at low temperatures)
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d Colour
mm  
160 brown
Photo Draft
Photo Ostendorf HT Bend 87° HTBR reducer, white, PP, d - 32, d1 - 50 [Code number: 521412] Draft Ostendorf HT Bend 87° HTBR reducer, white, PP, d - 32, d1 - 50 [Code number: 521412]
Ostendorf HT Bend 87° HTBR reducer, white, PP, d - 32, d1 - 50 [Code number: 521412]
Details 		521412 172 rub

Application purpose:

  • For drainage systems
  • For rainwater systems
  • For ventilation systems

System characteristics:

  • Low noise level;
  • Resistance to corrosion and chemicals;
  • Flammability;
  • Simple and fast installation;
  • Long service life and warranty.

Colour: white

Material: Polypropylene.

Diameter: 32 - 50 mm

Download the installation instructions of product: HT bend

Chemical resistance of: HT system
Photo Draft
Photo SINICON Standard Cap, d - 32 [Code number: 524000.R] Draft SINICON Standard Cap, d - 32 [Code number: 524000.R]
SINICON Standard Cap, d - 32 [Code number: 524000.R]
Details 		524000.R 16 rub

Application purposes:

  • For domestic drainage system
  • For plugging dead-end sections of pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d L Weight Colour
mm mm kg  
32 28 0,005 Gray
Photo Draft
Photo SINIKON Comfort Plus Cap, PP, d - 40 [Code number: 524001.K] Draft SINIKON Comfort Plus Cap, PP, d - 40 [Code number: 524001.K]
SINIKON Comfort Plus Cap, PP, d - 40 [Code number: 524001.K]
Details 		524001.K 37 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d Colour
mm  
40 white
Photo Draft
Photo SINIKON Standart Cap, PP, d - 40 [Code number: 524001.R] Draft SINIKON Standart Cap, PP, d - 40 [Code number: 524001.R]
SINIKON Standart Cap, PP, d - 40 [Code number: 524001.R]
Details 		524001.R 26 rub

Application purposes:

  • For domestic drainage system
  • For plugging dead-end sections of pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d L Weight Colour
mm mm kg  
40 28 0,012 Gray
Photo Draft
Photo SINIKON Comfort Plus Cap, PP, d - 50 [Code number: 524003.K] Draft SINIKON Comfort Plus Cap, PP, d - 50 [Code number: 524003.K]
SINIKON Comfort Plus Cap, PP, d - 50 [Code number: 524003.K]
Details 		524003.K 41 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d Colour
mm  
50 white
Photo Draft
Photo SINIKON Standart Cap, PP, d - 50 [Code number: 524003.R] Draft SINIKON Standart Cap, PP, d - 50 [Code number: 524003.R]
SINIKON Standart Cap, PP, d - 50 [Code number: 524003.R]
Details 		524003.R 28 rub

Application purposes:

  • For domestic drainage system
  • For plugging dead-end sections of pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d L Weight Colour
mm mm kg  
50 28 0,014 Gray
Photo Draft
Photo (REPLACEMENT: 524005CR) - SINIKON Standart Cap, PP, D75 [Code number: 524005.C] Draft (REPLACEMENT: 524005CR) - SINIKON Standart Cap, PP, D75 [Code number: 524005.C]
(REPLACEMENT: 524005CR) - SINIKON Standart Cap, PP, D75 [Code number: 524005.C]
Details 		524005.C

Application purposes:

  • For domestic drainage system
  • For closing dead-end parts of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Colour
mm  
75 Gray
Photo Draft
Photo SINIKON Standart Cap, PP, D75 [Code number: 524005CR] Draft SINIKON Standart Cap, PP, D75 [Code number: 524005CR]
SINIKON Standart Cap, PP, D75 [Code number: 524005CR]
Details 		524005CR 102 rub

Application purposes:

  • For domestic drainage system
  • For plugging dead-end sections of pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d L Weight Colour
mm mm kg  
75 - 0,028 Gray
Photo Draft
Photo (REPLACEMENT: 524005.C) - SINIKON Standart Cap, PP, D75 [Code number: 524005.R] Draft (REPLACEMENT: 524005.C) - SINIKON Standart Cap, PP, D75 [Code number: 524005.R]
(REPLACEMENT: 524005.C) - SINIKON Standart Cap, PP, D75 [Code number: 524005.R]
Details 		524005.R
REPLACEMENT: 524005.C

Application purposes:

  • For domestic drainage system
  • For plugging dead-end sections of pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d L Weight Colour
mm mm kg  
75 - 0,028 Gray
Photo Draft
Photo SINIKON Comfort Plus Cap, PP, d - 110 [Code number: 524007.K] Draft SINIKON Comfort Plus Cap, PP, d - 110 [Code number: 524007.K]
SINIKON Comfort Plus Cap, PP, d - 110 [Code number: 524007.K]
Details 		524007.K 74 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d Colour
mm  
110 white
Photo Draft
Photo SINIKON Standart Cap, PP, d - 110 [Code number: 524007.R] Draft SINIKON Standart Cap, PP, d - 110 [Code number: 524007.R]
SINIKON Standart Cap, PP, d - 110 [Code number: 524007.R]
Details 		524007.R 50 rub

Application purposes:

  • For domestic drainage system
  • For plugging dead-end sections of pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d L Weight Colour
mm mm kg  
110 32 0,066 Gray
Photo Draft
Photo SINIKON Universal Cap for outdoor sewage, PP, d - 110 [Code number: 524007.U] Draft SINIKON Universal Cap for outdoor sewage, PP, d - 110 [Code number: 524007.U]
SINIKON Universal Cap for outdoor sewage, PP, d - 110 [Code number: 524007.U]
Details 		524007.U 67 rub

Application purposes:

  • For domestic drainage system
  • For outdoor drainage system
  • For storm water drainage system
  • For closing of pipeline dead ends

Material: homopolymer of propylene PP-H

Warranty: 20 years

Maximum continuous temperature of waste water: +80 °С

Maximum short-term of waste water: +95 °С

Service life: not less than 50 years

The main advantages of the SINIKON Universal system:

  • High chemical resistance
  • Corrosion resistance
  • Does not conduct electricity
  • Tightness of connections
  • Low roughness coefficient
  • Resistance to hydroabrasive wear
  • Resistance to impact (including at low temperatures)
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d Colour
mm  
110 brown
© Inrusstrade.ru 1999-2025. "Inrusstrade" Ltd. Copying and quoting is prohibited