Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Lenin Hills

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Наименование Article Цена
Photo Draft
Photo (REPLACEMENT: 524005CR) - SINIKON Standart Cap, PP, D75 [Code number: 524005.C] Draft (REPLACEMENT: 524005CR) - SINIKON Standart Cap, PP, D75 [Code number: 524005.C]
(REPLACEMENT: 524005CR) - SINIKON Standart Cap, PP, D75 [Code number: 524005.C]
Details 		524005.C

Application purposes:

  • For domestic drainage system
  • For closing dead-end parts of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Colour
mm  
75 Gray
Photo Draft
Photo SINIKON Standart Cap, PP, D75 [Code number: 524005CR] Draft SINIKON Standart Cap, PP, D75 [Code number: 524005CR]
SINIKON Standart Cap, PP, D75 [Code number: 524005CR]
Details 		524005CR 104 rub

Application purposes:

  • For domestic drainage system
  • For plugging dead-end sections of pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d L Weight Colour
mm mm kg  
75 - 0,028 Gray
Photo Draft
Photo (REPLACEMENT: 524005.C) - SINIKON Standart Cap, PP, D75 [Code number: 524005.R] Draft (REPLACEMENT: 524005.C) - SINIKON Standart Cap, PP, D75 [Code number: 524005.R]
(REPLACEMENT: 524005.C) - SINIKON Standart Cap, PP, D75 [Code number: 524005.R]
Details 		524005.R
REPLACEMENT: 524005.C

Application purposes:

  • For domestic drainage system
  • For plugging dead-end sections of pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d L Weight Colour
mm mm kg  
75 - 0,028 Gray
Photo Draft
Photo SINIKON Comfort Plus Cap, PP, d - 110 [Code number: 524007.K] Draft SINIKON Comfort Plus Cap, PP, d - 110 [Code number: 524007.K]
SINIKON Comfort Plus Cap, PP, d - 110 [Code number: 524007.K]
Details 		524007.K 75 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d Colour
mm  
110 white
Photo Draft
Photo SINIKON Standart Cap, PP, d - 110 [Code number: 524007.R] Draft SINIKON Standart Cap, PP, d - 110 [Code number: 524007.R]
SINIKON Standart Cap, PP, d - 110 [Code number: 524007.R]
Details 		524007.R 51 rub

Application purposes:

  • For domestic drainage system
  • For plugging dead-end sections of pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d L Weight Colour
mm mm kg  
110 32 0,066 Gray
Photo Draft
Photo SINIKON Universal Cap for outdoor sewage, PP, d - 110 [Code number: 524007.U] Draft SINIKON Universal Cap for outdoor sewage, PP, d - 110 [Code number: 524007.U]
SINIKON Universal Cap for outdoor sewage, PP, d - 110 [Code number: 524007.U]
Details 		524007.U 69 rub

Application purposes:

  • For domestic drainage system
  • For outdoor drainage system
  • For storm water drainage system
  • For closing of pipeline dead ends

Material: homopolymer of propylene PP-H

Warranty: 20 years

Maximum continuous temperature of waste water: +80 °С

Maximum short-term of waste water: +95 °С

Service life: not less than 50 years

The main advantages of the SINIKON Universal system:

  • High chemical resistance
  • Corrosion resistance
  • Does not conduct electricity
  • Tightness of connections
  • Low roughness coefficient
  • Resistance to hydroabrasive wear
  • Resistance to impact (including at low temperatures)
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d Colour
mm  
110 brown
Photo Draft
Photo SINICON Universal Plug, PP, d - 160 [Code number: 524011.U] Draft SINICON Universal Plug, PP, d - 160 [Code number: 524011.U]
SINICON Universal Plug, PP, d - 160 [Code number: 524011.U]
Details 		524011.U 121 rub

Application purposes:

  • For domestic drainage system
  • For outdoor drainage system
  • For storm water drainage system
  • For closing of pipeline dead ends

Material: homopolymer of propylene PP-H

Warranty: 20 years

Maximum continuous temperature of waste water: +80 °С

Maximum short-term of waste water: +95 °С

Service life: not less than 50 years

The main advantages of the SINIKON Universal system:

  • High chemical resistance
  • Corrosion resistance
  • Does not conduct electricity
  • Tightness of connections
  • Low roughness coefficient
  • Resistance to hydroabrasive wear
  • Resistance to impact (including at low temperatures)
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d Colour
mm  
160 brown
Photo Draft
Photo (ARTICLE AMENDED BY 551001.R) - SINIKON Standart Bend 87° with frontal outlet (output up), PP, d - 110*50 [Code number: 551001.Е] Draft (ARTICLE AMENDED BY 551001.R) - SINIKON Standart Bend 87° with frontal outlet (output up), PP, d - 110*50 [Code number: 551001.Е]
(ARTICLE AMENDED BY 551001.R) - SINIKON Standart Bend 87° with frontal outlet (output up), PP, d - 110*50 [Code number: 551001.Е]
Details 		551001.E
ARTICLE AMENDED BY 551001.R

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline
There is an additional frontal outlet (output up).

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 Angle Weight Colour
mm mm   kg  
110 50 87° 0,255 Gray
Photo Draft
Photo SINIKON Bend 87° with front branch pipe (upward outlet), PP, d - 110, d1 - 50 [Code number: 551001.R] Draft SINIKON Bend 87° with front branch pipe (upward outlet), PP, d - 110, d1 - 50 [Code number: 551001.R]
SINIKON Bend 87° with front branch pipe (upward outlet), PP, d - 110, d1 - 50 [Code number: 551001.R]
Details 		551001.R 370 rub

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

There is an additional front branch pipe (upward outlet).

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Colour
mm    
110x50 87˚ Gray
Photo Draft
Photo (ARTICLE AMENDED BY 551002.R) - SINIKON Standart Bend 87° with frontal outlet (output back), PP, d - 110*50 [Code number: 551002.Е] Draft (ARTICLE AMENDED BY 551002.R) - SINIKON Standart Bend 87° with frontal outlet (output back), PP, d - 110*50 [Code number: 551002.Е]
(ARTICLE AMENDED BY 551002.R) - SINIKON Standart Bend 87° with frontal outlet (output back), PP, d - 110*50 [Code number: 551002.Е]
Details 		551002.E

ARTICLE AMENDED BY 551002.R

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

There is an additional frontal outlet (output back).

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 Angle Weight Colour
mm mm   kg  
110 50 87° 0,255 Gray
Photo Draft
Photo SINIKON Standart Bend 87° with frontal outlet (output back), PP, d - 110*50 [Code number: 551002.R] Draft SINIKON Standart Bend 87° with frontal outlet (output back), PP, d - 110*50 [Code number: 551002.R]
SINIKON Standart Bend 87° with frontal outlet (output back), PP, d - 110*50 [Code number: 551002.R]
Details 		551002.R 370 rub

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

There is an additional front branch pipe (output back).

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Colour
mm    
110x50 87˚ Gray
Photo Draft
Photo Wavin ML access pipe, d - 315 (on request) [Code number: 551806 / 22770400] Draft Wavin ML access pipe, d - 315 (on request) [Code number: 551806 / 22770400]
Wavin ML access pipe, d - 315 (on request) [Code number: 551806 / 22770400]
Details 		551806

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For outdoor drainage systems

Description

Wavin ML access pipe is suitable for the installation of external outdoor drainage systems, also it can be used to drain stormwater. It is used for inspection pipeline of the and cleaning it when necessary. It is resistant to acids and alkalis.

The access pipe is equipped with a sealing ring made of butadiene styrene - it is created a sealed connection.

Technical characteristics

Material: polyvinyl chloride (PVC).

Dy L1 F1 F2
mm mm mm mm
315 745 370 183
Photo Draft
Photo Wavin ML access pipe, d - 400 (on request) [Code number: 551807 / 22776400] Draft Wavin ML access pipe, d - 400 (on request) [Code number: 551807 / 22776400]
Wavin ML access pipe, d - 400 (on request) [Code number: 551807 / 22776400]
Details 		551807

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For outdoor drainage systems

Description

Wavin ML access pipe is suitable for the installation of external outdoor drainage systems, also it can be used to drain stormwater. It is used for inspection pipeline of the and cleaning it when necessary. It is resistant to acids and alkalis.

The access pipe is equipped with a sealing ring made of butadiene styrene - it is created a sealed connection.

Technical characteristics

Material: polyvinyl chloride (PVC).

Dy L1 F1 F2
mm mm mm mm
400 792 — —
Photo Draft
Photo (REPLACEMENT: 552003.R) - SINIKON Standart Bend 87° with left outlet, PP, d - 110*50 [Code number: 552003.Е] Draft (REPLACEMENT: 552003.R) - SINIKON Standart Bend 87° with left outlet, PP, d - 110*50 [Code number: 552003.Е]
(REPLACEMENT: 552003.R) - SINIKON Standart Bend 87° with left outlet, PP, d - 110*50 [Code number: 552003.Е]
Details 		552003.E
REPLACEMENT: 552003.R

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline
There is an additional left outlet.

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 Angle Weight Colour
mm mm   kg  
110 50 87° 0,255 Gray
Photo Draft
Photo SINIKON Standart Elbow 87° with left branch pipe, PP, d - 110, d1 - 50 [Code number: 552003.R] Draft SINIKON Standart Elbow 87° with left branch pipe, PP, d - 110, d1 - 50 [Code number: 552003.R]
SINIKON Standart Elbow 87° with left branch pipe, PP, d - 110, d1 - 50 [Code number: 552003.R]
Details 		552003.R 370 rub

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

There is a left branch pipe.

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Colour
mm    
110x50 87˚ Gray
Photo Draft
Photo (ARTICLE AMENDED BY 554003.R) - SINIKON Standart Bend 87° with right outlet, PP, d - 110*50 [Code number: 554003.Е] Draft (ARTICLE AMENDED BY 554003.R) - SINIKON Standart Bend 87° with right outlet, PP, d - 110*50 [Code number: 554003.Е]
(ARTICLE AMENDED BY 554003.R) - SINIKON Standart Bend 87° with right outlet, PP, d - 110*50 [Code number: 554003.Е]
Details 		554003.E
ARTICLE AMENDED BY 554003.R

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline
There is an additional right outlet,.

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 Angle Weight Colour
mm mm   kg  
110 50 87° 0,255 Gray
Photo Draft
Photo SINIKON Standart Bend 87° with right outlet, PP, d - 110*50 [Code number: 554003.R] Draft SINIKON Standart Bend 87° with right outlet, PP, d - 110*50 [Code number: 554003.R]
SINIKON Standart Bend 87° with right outlet, PP, d - 110*50 [Code number: 554003.R]
Details 		554003.R 370 rub

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

There is a right outlet.

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Colour
mm    
110x50 87˚ Gray
Photo Draft
Photo SINIKON Standart Bend 87° with 2 outlets, PP, d - 110*50 [Code number: 556003.R] Draft SINIKON Standart Bend 87° with 2 outlets, PP, d - 110*50 [Code number: 556003.R]
SINIKON Standart Bend 87° with 2 outlets, PP, d - 110*50 [Code number: 556003.R]
Details 		556003.R 425 rub

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

There are 2 outlets.

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 Angle Weight Colour
mm mm   kg  
110 50 87° 0,285 Gray
Photo Draft
Photo Ostendorf HT Bend 15° HTBw, white, PP, d - 32 [Code number: 559300] Draft Ostendorf HT Bend 15° HTBw, white, PP, d - 32 [Code number: 559300]
Ostendorf HT Bend 15° HTBw, white, PP, d - 32 [Code number: 559300]
Details 		559300 68 rub

Application purpose:

  • For drainage systems
  • For rainwater systems
  • For ventilation systems

Colour: white

Material: Polypropylene.

d α Z1 Z2 l1
mm mm mm mm mm
32 15° 3 8 42

Download the installation instructions of product: HT bend

Chemical resistance of: HT system
Photo Draft
Photo Ostendorf HT Bend 30° HTBw, white, PP, d - 32 [Code number: 559310] Draft Ostendorf HT Bend 30° HTBw, white, PP, d - 32 [Code number: 559310]
Ostendorf HT Bend 30° HTBw, white, PP, d - 32 [Code number: 559310]
Details 		559310 75 rub

Application purpose:

  • For drainage systems
  • For rainwater systems
  • For ventilation systems

Colour: white

Material: Polypropylene.

d α Z1 Z2 l1
mm mm mm mm mm
32 30° 6 10 42

Download the installation instructions of product: HT bend

Chemical resistance of: HT system
© Inrusstrade.ru 1999-2026. "Inrusstrade" Ltd. Copying and quoting is prohibited