Logo
Ru| En

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Name Article Price
Photo Draft
Photo SINIKON Standart Rubber reduction, white, d - 32*25 (Aquer) [Code number: RG.32.25] Draft SINIKON Standart Rubber reduction, white, d - 32*25 (Aquer) [Code number: RG.32.25]
SINIKON Standart Rubber reduction, white, d - 32*25 (Aquer) [Code number: RG.32.25]
Details 		RG.32.25 60 rub

Application purposes:

  • For domestic drainage system

Material: rubber

d d2
mm mm
32 25
Photo Draft
Photo SINIKON Standart Rubber reduction, white, d - 40*25 (Aquer) [Code number: RG.40.25] Draft SINIKON Standart Rubber reduction, white, d - 40*25 (Aquer) [Code number: RG.40.25]
SINIKON Standart Rubber reduction, white, d - 40*25 (Aquer) [Code number: RG.40.25]
Details 		RG.40.25 71 rub

Application purposes:

  • For domestic drainage system

Material: rubber

d d2
mm mm
40 25
Photo Draft
Photo SINIKON Standart Rubber reduction, white, d - 40*32 (Aquer) [Code number: RG.40.32] Draft SINIKON Standart Rubber reduction, white, d - 40*32 (Aquer) [Code number: RG.40.32]
SINIKON Standart Rubber reduction, white, d - 40*32 (Aquer) [Code number: RG.40.32]
Details 		RG.40.32 71 rub

Application purposes:

  • For domestic drainage system

Material: rubber

d d2
mm mm
40 32
Photo Draft
Photo SINIKON Standart Reducer, rubber, d - 50*25 (Aquer) [Code number: RG.50.25] Draft SINIKON Standart Reducer, rubber, d - 50*25 (Aquer) [Code number: RG.50.25]
SINIKON Standart Reducer, rubber, d - 50*25 (Aquer) [Code number: RG.50.25]
Details 		RG.50.25 77 rub

Application purposes:

  • For domestic drainage system

Material: rubber

d d2
mm mm
50 25
Photo Draft
Photo SINIKON Standart Reducer, rubber, d - 50*32 (Aquer) [Code number: RG.50.32] Draft SINIKON Standart Reducer, rubber, d - 50*32 (Aquer) [Code number: RG.50.32]
SINIKON Standart Reducer, rubber, d - 50*32 (Aquer) [Code number: RG.50.32]
Details 		RG.50.32 77 rub

Application purposes:

  • For domestic drainage system

Material: rubber

d d2
mm mm
50 32
Photo Draft
Photo SINIKON Standart Rubber reduction, white, d - 50*40 (Aquer) [Code number: RG.50.40] Draft SINIKON Standart Rubber reduction, white, d - 50*40 (Aquer) [Code number: RG.50.40]
SINIKON Standart Rubber reduction, white, d - 50*40 (Aquer) [Code number: RG.50.40]
Details 		RG.50.40 77 rub

Application purposes:

  • For domestic drainage system

Material: rubber

d d2
mm mm
50 40
Photo Draft
Photo SINIKON Standart Rubber reduction, white, d - 56*32 (Aquer) (price on request) [Code number: RG.56.32] Draft SINIKON Standart Rubber reduction, white, d - 56*32 (Aquer) (price on request) [Code number: RG.56.32]
SINIKON Standart Rubber reduction, white, d - 56*32 (Aquer) (price on request) [Code number: RG.56.32]
Details 		RG.56.32

Application purposes:

  • For domestic drainage system

Material: rubber

d d2
mm mm
56 32
Photo Draft
Photo SINIKON Standart Rubber reduction, white, d - 56*40 (Aquer) (price on request) [Code number: RG.56.40] Draft SINIKON Standart Rubber reduction, white, d - 56*40 (Aquer) (price on request) [Code number: RG.56.40]
SINIKON Standart Rubber reduction, white, d - 56*40 (Aquer) (price on request) [Code number: RG.56.40]
Details 		RG.56.40

Application purposes:

  • For domestic drainage system

Material: rubber

d d2
mm mm
56 40
Photo Draft
Photo SINIKON Standart Eccentric reducer 90°, corner, PP, white, d - 50*32 [Code number: RP.P.050.032] Draft SINIKON Standart Eccentric reducer 90°, corner, PP, white, d - 50*32 [Code number: RP.P.050.032]
SINIKON Standart Eccentric reducer 90°, corner, PP, white, d - 50*32 [Code number: RP.P.050.032]
Details 		RP.P.050.032 78 rub

Application purposes:

  • For domestic drainage system

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

d d2 Colour
mm mm  
50 32 White/Gray
Photo Draft
Photo Wavin PVC Pressure Pipe systems T-piece flared, d - 63*63*63 [Code number: RRS010063 / 20134009] Draft Wavin PVC Pressure Pipe systems T-piece flared, d - 63*63*63 [Code number: RRS010063 / 20134009]
Wavin PVC Pressure Pipe systems T-piece flared, d - 63*63*63 [Code number: RRS010063 / 20134009]
Details 		RRS010063

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin T-piece flared can be used for installation of pressure piping systems. It is used to combine two branches of the pipeline into one flow. You can see the appearance of T-piece flared and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

D1 D3 B1 Z1 B3 Z3
mm mm mm mm mm mm
63-63-63 - 96 41 - -
Photo Draft
Photo Wavin PVC Pressure Pipe systems T-piece flared, d - 75*63*75 [Code number: RRS010074 / 20137009] Draft Wavin PVC Pressure Pipe systems T-piece flared, d - 75*63*75 [Code number: RRS010074 / 20137009]
Wavin PVC Pressure Pipe systems T-piece flared, d - 75*63*75 [Code number: RRS010074 / 20137009]
Details 		RRS010074

ATTENTION! This product is temporarily unavailable for order!

D1 D3 B1 Z1 B3 Z3
mm mm mm mm mm mm
75-63-75 63 102 48 96 48
Photo Draft
Photo Wavin PVC Pressure Pipe systems T-piece flared, d - 75*75*75 [Code number: RRS010075 / 20137019] Draft Wavin PVC Pressure Pipe systems T-piece flared, d - 75*75*75 [Code number: RRS010075 / 20137019]
Wavin PVC Pressure Pipe systems T-piece flared, d - 75*75*75 [Code number: RRS010075 / 20137019]
Details 		RRS010075

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin T-piece flared can be used for installation of pressure piping systems. It is used to combine two branches of the pipeline into one flow. You can see the appearance of T-piece flared and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

D1 D3 B1 Z1 B3 Z3
mm mm mm mm mm mm
75-75-75 - 102 48 - -
Photo Draft
Photo Wavin PVC Pressure Pipe systems T-piece flared, d - 90*63*90 [Code number: RRS010088 / 20140009] Draft Wavin PVC Pressure Pipe systems T-piece flared, d - 90*63*90 [Code number: RRS010088 / 20140009]
Wavin PVC Pressure Pipe systems T-piece flared, d - 90*63*90 [Code number: RRS010088 / 20140009]
Details 		RRS010088

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin T-piece flared can be used for installation of pressure piping systems. It is used to combine two branches of the pipeline into one flow. You can see the appearance of T-piece flared and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

D1 D3 B1 Z1 B3 Z3
mm mm mm mm mm mm
90-63-90 63 108 50 96 54
Photo Draft
Photo Wavin PVC Pressure Pipe systems T-piece flared, d - 90*75*90 [Code number: RRS010089 / 20140019] Draft Wavin PVC Pressure Pipe systems T-piece flared, d - 90*75*90 [Code number: RRS010089 / 20140019]
Wavin PVC Pressure Pipe systems T-piece flared, d - 90*75*90 [Code number: RRS010089 / 20140019]
Details 		RRS010089

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin T-piece flared can be used for installation of pressure piping systems. It is used to combine two branches of the pipeline into one flow. You can see the appearance of T-piece flared and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

D1 D3 B1 Z1 B3 Z3
mm mm mm mm mm mm
90-75-90 75 108 50 102 56
Photo Draft
Photo Wavin PVC Pressure Pipe systems T-piece flared, d - 90*90*90 [Code number: RRS010090 / 20140029] Draft Wavin PVC Pressure Pipe systems T-piece flared, d - 90*90*90 [Code number: RRS010090 / 20140029]
Wavin PVC Pressure Pipe systems T-piece flared, d - 90*90*90 [Code number: RRS010090 / 20140029]
Details 		RRS010090

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin T-piece flared can be used for installation of pressure piping systems. It is used to combine two branches of the pipeline into one flow. You can see the appearance of T-piece flared and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

D1 D3 B1 Z1 B3 Z3
mm mm mm mm mm mm
90-90-90 - 108 57 - -
Photo Draft
Photo Wavin PVC Pressure Pipe systems T-piece flared, d - 110*63*110 [Code number: RRS010107 / 20146009] Draft Wavin PVC Pressure Pipe systems T-piece flared, d - 110*63*110 [Code number: RRS010107 / 20146009]
Wavin PVC Pressure Pipe systems T-piece flared, d - 110*63*110 [Code number: RRS010107 / 20146009]
Details 		RRS010107

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin T-piece flared can be used for installation of pressure piping systems. It is used to combine two branches of the pipeline into one flow. You can see the appearance of T-piece flared and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

D1 D3 B1 Z1 B3 Z3
mm mm mm mm mm mm
110-63-110 63 115 53 96 72
Photo Draft
Photo Wavin PVC Pressure Pipe systems T-piece flared, d - 110*75*110 [Code number: RRS010108 / 20146019] Draft Wavin PVC Pressure Pipe systems T-piece flared, d - 110*75*110 [Code number: RRS010108 / 20146019]
Wavin PVC Pressure Pipe systems T-piece flared, d - 110*75*110 [Code number: RRS010108 / 20146019]
Details 		RRS010108

ATTENTION! This product is temporarily unavailable for order!

D1 D3 B1 Z1 B3 Z3
mm mm mm mm mm mm
110-75-110 75 115 53 102 66
Photo Draft
Photo Wavin PVC Pressure Pipe systems T-piece flared, d - 110*90*110 [Code number: RRS010109 / 20146029] Draft Wavin PVC Pressure Pipe systems T-piece flared, d - 110*90*110 [Code number: RRS010109 / 20146029]
Wavin PVC Pressure Pipe systems T-piece flared, d - 110*90*110 [Code number: RRS010109 / 20146029]
Details 		RRS010109

ATTENTION! This product is temporarily unavailable for order!

D1 D3 B1 Z1 B3 Z3
mm mm mm mm mm mm
110-90-110 90 115 61 108 67
Photo Draft
Photo Wavin PVC Pressure Pipe systems T-piece flared, d - 110*110*110 [Code number: RRS010110 / 20146039] Draft Wavin PVC Pressure Pipe systems T-piece flared, d - 110*110*110 [Code number: RRS010110 / 20146039]
Wavin PVC Pressure Pipe systems T-piece flared, d - 110*110*110 [Code number: RRS010110 / 20146039]
Details 		RRS010110

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin T-piece flared can be used for installation of pressure piping systems. It is used to combine two branches of the pipeline into one flow. You can see the appearance of T-piece flared and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

D1 D3 B1 Z1 B3 Z3
mm mm mm mm mm mm
110-110-110 - 115 69 - -
Photo Draft
Photo Wavin PVC Pressure Pipe systems T-piece flared, d - 160*90*160 [Code number: RRS010156 / 20156009] Draft Wavin PVC Pressure Pipe systems T-piece flared, d - 160*90*160 [Code number: RRS010156 / 20156009]
Wavin PVC Pressure Pipe systems T-piece flared, d - 160*90*160 [Code number: RRS010156 / 20156009]
Details 		RRS010156

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin T-piece flared can be used for installation of pressure piping systems. It is used to combine two branches of the pipeline into one flow. You can see the appearance of T-piece flared and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

D1 D3 B1 Z1 B3 Z3
mm mm mm mm mm mm
160-90-160 90 131 67 108 92

© Inrusstrade.ru 1999-2024. "Inrusstrade" Ltd. Copying and quoting is prohibited