Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Lenin Hills

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Наименование Article Цена
Photo Draft
Photo (REPLACEMENT: 504039.C) - SINIKON Standart Bend 30°, PP, D75 [Code number: 504039.R] Draft (REPLACEMENT: 504039.C) - SINIKON Standart Bend 30°, PP, D75 [Code number: 504039.R]
(REPLACEMENT: 504039.C) - SINIKON Standart Bend 30°, PP, D75 [Code number: 504039.R]
Details 		504039.R
REPLACEMENT: 504039.C

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Weight Colour
mm   kg  
75 30° 0,083 Gray
Photo Draft
Photo (REPLACEMENT: 504041.R) - SINIKON Standart Bend 45˚, PP, D75 [Code number: 504041.C] Draft (REPLACEMENT: 504041.R) - SINIKON Standart Bend 45˚, PP, D75 [Code number: 504041.C]
(REPLACEMENT: 504041.R) - SINIKON Standart Bend 45˚, PP, D75 [Code number: 504041.C]
Details 		504041.C

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Colour
mm    
75 45˚ Gray
Photo Draft
Photo (DISCONTINUED) - SINIKON Standart Bend 45°, PP, d - 75 [Code number: 504041CR] Draft (DISCONTINUED) - SINIKON Standart Bend 45°, PP, d - 75 [Code number: 504041CR]
(DISCONTINUED) - SINIKON Standart Bend 45°, PP, d - 75 [Code number: 504041CR]
Details 		504041CR

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: PP-H polypropylene.

Material density: 0.9-0.95 g/cm3.

Maximum operating temperature: +80 °C (short-term up to +95 °C).

Melting point: +160 °С.

Main advantages of the SINIKON Standard system:

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Colour
mm    
75 45˚ Metallic grey
Photo Draft
Photo (ARTICLE REPLACEMENT: 504041CR) - SINIKON Standart Bend 45°, PP, D75 [Code number: 504041.R] Draft (ARTICLE REPLACEMENT: 504041CR) - SINIKON Standart Bend 45°, PP, D75 [Code number: 504041.R]
(ARTICLE REPLACEMENT: 504041CR) - SINIKON Standart Bend 45°, PP, D75 [Code number: 504041.R]
Details 		504041.R 96 rub
ARTICLE REPLACEMENT: 504041CR

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Weight Colour
mm   kg  
75 45° 0,087 Gray
Photo Draft
Photo (ARTICLE REPLACEMENT: 504043CR) - SINIKON Standart Bend 67˚, PP, d - 75 [Code number: 504043.C] Draft (ARTICLE REPLACEMENT: 504043CR) - SINIKON Standart Bend 67˚, PP, d - 75 [Code number: 504043.C]
(ARTICLE REPLACEMENT: 504043CR) - SINIKON Standart Bend 67˚, PP, d - 75 [Code number: 504043.C]
Details 		504043.C

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Colour
mm    
75 67˚ Gray
Photo Draft
Photo SINIKON Standart Bend 67˚, PP, d - 75 [Code number: 504043CR] Draft SINIKON Standart Bend 67˚, PP, d - 75 [Code number: 504043CR]
SINIKON Standart Bend 67˚, PP, d - 75 [Code number: 504043CR]
Details 		504043CR 322 rub

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: PP-H polypropylene.

Material density: 0.9-0.95 g/cm3.

Maximum operating temperature: +80 °C (short-term up to +95 °C).

Melting point: +160 °С.

Main advantages of the SINIKON Standard system:

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Colour
mm    
75 67˚ Metallic grey
Photo Draft
Photo (REPLACEMENT: 504043.C) - SINIKON Standart Bend 67°, PP, D75 [Code number: 504043.R] Draft (REPLACEMENT: 504043.C) - SINIKON Standart Bend 67°, PP, D75 [Code number: 504043.R]
(REPLACEMENT: 504043.C) - SINIKON Standart Bend 67°, PP, D75 [Code number: 504043.R]
Details 		504043.R
REPLACEMENT: 504043.C

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Weight Colour
mm   kg  
75 67° 0,090 Gray
Photo Draft
Photo (REPLACEMENT: 504047.R) - SINIKON Standart Bend 87˚, D75 [Code number: 504047.C] Draft (REPLACEMENT: 504047.R) - SINIKON Standart Bend 87˚, D75 [Code number: 504047.C]
(REPLACEMENT: 504047.R) - SINIKON Standart Bend 87˚, D75 [Code number: 504047.C]
Details 		504047.C

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Colour
mm    
75 87˚ Gray
Photo Draft
Photo SINICON Standard Bend 87°, PP, d - 75 [Code number: 504047CR] Draft SINICON Standard Bend 87°, PP, d - 75 [Code number: 504047CR]
SINICON Standard Bend 87°, PP, d - 75 [Code number: 504047CR]
Details 		504047CR 247 rub

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: PP-H polypropylene.

Material density: 0.9-0.95 g/cm3.

Maximum operating temperature: +80 °C (short-term up to +95 °C).

Melting point: +160 °С.

Main advantages of the SINIKON Standard system:

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Colour
mm    
75 87˚ Metallic grey
Photo Draft
Photo (ARTICLE REPLACEMENT: 504047CR) - SINIKON Standart Bend 87°, PP, D75 [Code number: 504047.R] Draft (ARTICLE REPLACEMENT: 504047CR) - SINIKON Standart Bend 87°, PP, D75 [Code number: 504047.R]
(ARTICLE REPLACEMENT: 504047CR) - SINIKON Standart Bend 87°, PP, D75 [Code number: 504047.R]
Details 		504047.R 96 rub
ARTICLE REPLACEMENT: 504047CR

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Weight Colour
mm   kg  
75 87° 0,097 Gray
Photo Draft
Photo SINIKON Comfort Plus Bend 15°, PP, d - 110 [Code number: 504049.K] Draft SINIKON Comfort Plus Bend 15°, PP, d - 110 [Code number: 504049.K]
SINIKON Comfort Plus Bend 15°, PP, d - 110 [Code number: 504049.K]
Details 		504049.K 220 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d Angle Wall thickness Colour
mm   mm  
110 15° 2,7 white
Photo Draft
Photo SINIKON Standart Bend 15°, PP, d - 110 [Code number: 504049.R] Draft SINIKON Standart Bend 15°, PP, d - 110 [Code number: 504049.R]
SINIKON Standart Bend 15°, PP, d - 110 [Code number: 504049.R]
Details 		504049.R 157 rub

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Weight Colour
mm   kg  
110 15° 0,165 Gray
Photo
Photo SINIKON Universal Bend 15° for outdoor sewage, PP, d - 110 [Code number: 504049.U]
SINIKON Universal Bend 15° for outdoor sewage, PP, d - 110 [Code number: 504049.U]
Details 		504049.U 176 rub

Application purposes:

  • For domestic drainage system
  • For outdoor drainage system
  • For storm water drainage system
  • To change the direction of pipeline

Material: homopolymer of propylene PP-H

Warranty: 20 years

Maximum continuous temperature of waste water: +80 °С

Maximum short-term of waste water: +95 °С

Service life: not less than 50 years

The main advantages of the SINIKON Universal system:

  • High chemical resistance
  • Corrosion resistance
  • Does not conduct electricity
  • Tightness of connections
  • Low roughness coefficient
  • Resistance to hydroabrasive wear
  • Resistance to impact (including at low temperatures)
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d Angle Colour
mm    
110 15° brown
Photo Draft
Photo SINIKON Comfort Plus Bend 30°, PP, d - 110 [Code number: 504051.K] Draft SINIKON Comfort Plus Bend 30°, PP, d - 110 [Code number: 504051.K]
SINIKON Comfort Plus Bend 30°, PP, d - 110 [Code number: 504051.K]
Details 		504051.K 220 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d Angle Wall thickness Colour
mm   mm  
110 30° 2,7 white
Photo Draft
Photo SINIKON Standart Bend 30°, PP, d - 110 [Code number: 504051.R] Draft SINIKON Standart Bend 30°, PP, d - 110 [Code number: 504051.R]
SINIKON Standart Bend 30°, PP, d - 110 [Code number: 504051.R]
Details 		504051.R 135 rub

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Weight Colour
mm   kg  
110 30° 0,175 Gray
Photo
Photo SINIKON Universal Bend 30° for outdoor sewage, PP, d - 110 [Code number: 504051.U]
SINIKON Universal Bend 30° for outdoor sewage, PP, d - 110 [Code number: 504051.U]
Details 		504051.U 176 rub

Application purposes:

  • For domestic drainage system
  • For outdoor drainage system
  • For storm water drainage system
  • To change the direction of pipeline

Material: homopolymer of propylene PP-H

Warranty: 20 years

Maximum continuous temperature of waste water: +80 °С

Maximum short-term of waste water: +95 °С

Service life: not less than 50 years

The main advantages of the SINIKON Universal system:

  • High chemical resistance
  • Corrosion resistance
  • Does not conduct electricity
  • Tightness of connections
  • Low roughness coefficient
  • Resistance to hydroabrasive wear
  • Resistance to impact (including at low temperatures)
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d Angle Colour
mm    
110 30° brown
Photo Draft
Photo SINIKON Comfort Plus Bend 45°, PP, d - 110 [Code number: 504053.K] Draft SINIKON Comfort Plus Bend 45°, PP, d - 110 [Code number: 504053.K]
SINIKON Comfort Plus Bend 45°, PP, d - 110 [Code number: 504053.K]
Details 		504053.K 201 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Reinforced fitting with increased wall thickness.

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d Angle Wall thickness Colour
mm   mm  
110 45° 3,4 white
Photo Draft
Photo SINIKON Standart Bend 45°, PP, d - 110 [Code number: 504053.R] Draft SINIKON Standart Bend 45°, PP, d - 110 [Code number: 504053.R]
SINIKON Standart Bend 45°, PP, d - 110 [Code number: 504053.R]
Details 		504053.R 143 rub

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Weight Colour
mm   kg  
110 45° 0,185 Gray
Photo
Photo SINIKON Universal Bend 45° for outdoor sewage, PP, d - 110 [Code number: 504053.U]
SINIKON Universal Bend 45° for outdoor sewage, PP, d - 110 [Code number: 504053.U]
Details 		504053.U 176 rub

Application purposes:

  • For domestic drainage system
  • For outdoor drainage system
  • For storm water drainage system
  • To change the direction of pipeline

Material: homopolymer of propylene PP-H

Warranty: 20 years

Maximum continuous temperature of waste water: +80 °С

Maximum short-term of waste water: +95 °С

Service life: not less than 50 years

The main advantages of the SINIKON Universal system:

  • High chemical resistance
  • Corrosion resistance
  • Does not conduct electricity
  • Tightness of connections
  • Low roughness coefficient
  • Resistance to hydroabrasive wear
  • Resistance to impact (including at low temperatures)
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d Angle Colour
mm    
110 45° brown
Photo Draft
Photo SINIKON Comfort Plus Bend 67°, PP, d - 110 [Code number: 504055.K] Draft SINIKON Comfort Plus Bend 67°, PP, d - 110 [Code number: 504055.K]
SINIKON Comfort Plus Bend 67°, PP, d - 110 [Code number: 504055.K]
Details 		504055.K 220 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d Angle Wall thickness Colour
mm   mm  
110 67° 2,7 white
© Inrusstrade.ru 1999-2025. "Inrusstrade" Ltd. Copying and quoting is prohibited