Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Leninsky urban district

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Наименование Article Цена
Photo Draft
Photo SINIKON Comfort Plus Double branch fitting 45°, d - 110, d1 - 50, d2 - 50 [Code number: 506008.K] Draft SINIKON Comfort Plus Double branch fitting 45°, d - 110, d1 - 50, d2 - 50 [Code number: 506008.K]
SINIKON Comfort Plus Double branch fitting 45°, d - 110, d1 - 50, d2 - 50 [Code number: 506008.K]
Details 		506008.K 812 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Connection type: socket. Installation does not require the use of special tools.

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years (subject to manufacturer's recommendations)

Technical specifications

D D1 D2 Angle Colour
mm mm mm    
110 50 50 45° white
Photo Draft
Photo SINIKON Standart Double branch fitting 45°, PP, d - 110*50*50 [Code number: 506008.R] Draft SINIKON Standart Double branch fitting 45°, PP, d - 110*50*50 [Code number: 506008.R]
SINIKON Standart Double branch fitting 45°, PP, d - 110*50*50 [Code number: 506008.R]
Details 		506008.R 579 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 d2 Angle Colour
mm mm mm    
110 50 50 45° Gray
Photo Draft
Photo SINIKON Standart Double branch fitting 67°, PP, d - 110*50*50 [Code number: 506009] Draft SINIKON Standart Double branch fitting 67°, PP, d - 110*50*50 [Code number: 506009]
SINIKON Standart Double branch fitting 67°, PP, d - 110*50*50 [Code number: 506009]
Details 		506009 557 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 d2 Angle Weight Colour
mm mm mm   kg  
110 50 50 67° 0,230 Gray
Photo Draft
Photo SINIKON Comfort Plus Double branch fitting 87°, PP, d - 110*50*50 [Code number: 506011.K] Draft SINIKON Comfort Plus Double branch fitting 87°, PP, d - 110*50*50 [Code number: 506011.K]
SINIKON Comfort Plus Double branch fitting 87°, PP, d - 110*50*50 [Code number: 506011.K]
Details 		506011.K 812 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d d2 d3 Angle Wall thickness Colour
mm mm mm   mm  
110 50 50 87° 2,7 white
Photo Draft
Photo SINIKON Standart Double branch fitting 87°, PP, d - 110*50*50 [Code number: 506011.R] Draft SINIKON Standart Double branch fitting 87°, PP, d - 110*50*50 [Code number: 506011.R]
SINIKON Standart Double branch fitting 87°, PP, d - 110*50*50 [Code number: 506011.R]
Details 		506011.R 579 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 d2 Angle Weight Colour
mm mm mm   kg  
110 50 50 87° 0,250 Gray
Photo Draft
Photo SINIKON Comfort Plus Double branch fitting 87°, PP, d - 110*110*50 [Code number: 506012.K] Draft SINIKON Comfort Plus Double branch fitting 87°, PP, d - 110*110*50 [Code number: 506012.K]
SINIKON Comfort Plus Double branch fitting 87°, PP, d - 110*110*50 [Code number: 506012.K]
Details 		506012.K 909 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Reinforced fitting with increased wall thickness.

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d d2 d3 Angle Wall thickness Colour
mm mm mm   mm  
110 110 50 87° 3,4 white
Photo Draft
Photo SINIKON Standart Double branch fitting 87°, PP, d - 110*110*50 [Code number: 506012.R] Draft SINIKON Standart Double branch fitting 87°, PP, d - 110*110*50 [Code number: 506012.R]
SINIKON Standart Double branch fitting 87°, PP, d - 110*110*50 [Code number: 506012.R]
Details 		506012.R 648 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 d2 Angle Weight Colour
mm mm mm   kg  
110 110 50 87° 0,505 Gray
Photo Draft
Photo SINIKON Standart Double branch fitting 67°, PP, d - 110*110*110 [Code number: 506013] Draft SINIKON Standart Double branch fitting 67°, PP, d - 110*110*110 [Code number: 506013]
SINIKON Standart Double branch fitting 67°, PP, d - 110*110*110 [Code number: 506013]
Details 		506013 722 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 d2 Angle Weight Colour
mm mm mm   kg  
110 110 110 67° 0,430 Gray
Photo Draft
Photo SINIKON Comfort Plus Double branch fitting 87°, PP, d - 110*110*110 [Code number: 506015.K] Draft SINIKON Comfort Plus Double branch fitting 87°, PP, d - 110*110*110 [Code number: 506015.K]
SINIKON Comfort Plus Double branch fitting 87°, PP, d - 110*110*110 [Code number: 506015.K]
Details 		506015.K 909 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Reinforced fitting with increased wall thickness.

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d d2 d3 Angle Wall thickness Colour
mm mm mm   mm  
110 110 110 87° 3,4 white
Photo Draft
Photo SINIKON Standart Double branch fitting 87°, PP, d - 110*110*110 [Code number: 506015.R] Draft SINIKON Standart Double branch fitting 87°, PP, d - 110*110*110 [Code number: 506015.R]
SINIKON Standart Double branch fitting 87°, PP, d - 110*110*110 [Code number: 506015.R]
Details 		506015.R 648 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 d2 Angle Weight Colour
mm mm mm   kg  
110 110 110 87° 0,505 Gray
Photo Draft
Photo SINIKON Comfort Plus Double branch fitting 45°, PP, d - 110х110х110 [Code number: 506016.K] Draft SINIKON Comfort Plus Double branch fitting 45°, PP, d - 110х110х110 [Code number: 506016.K]
SINIKON Comfort Plus Double branch fitting 45°, PP, d - 110х110х110 [Code number: 506016.K]
Details 		506016.K 909 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 10 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d d2 d3 Angle Wall thickness Colour
mm mm mm   mm  
110 110 110 45° 2,7 white
Photo Draft
Photo SINIKON Standart Double branch fitting 45°, PP, d - 110*110*110 [Code number: 506016.R] Draft SINIKON Standart Double branch fitting 45°, PP, d - 110*110*110 [Code number: 506016.R]
SINIKON Standart Double branch fitting 45°, PP, d - 110*110*110 [Code number: 506016.R]
Details 		506016.R 648 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 d2 Angle Colour
mm mm mm    
110 110 110 45° Gray
Photo Draft
Photo СИНИКОН Comfort Plus T-piece 45°, d - 32, d1 - 32, (50 pcs per package) [Code number: 508001.K] Draft СИНИКОН Comfort Plus T-piece 45°, d - 32, d1 - 32, (50 pcs per package) [Code number: 508001.K]
СИНИКОН Comfort Plus T-piece 45°, d - 32, d1 - 32, (50 pcs per package) [Code number: 508001.K]
Details 		508001.K 147 rub
Photo Draft
Photo SINIKON Standart T-piece 45°, PP, d - 32*32 [Code number: 508001.R] Draft SINIKON Standart T-piece 45°, PP, d - 32*32 [Code number: 508001.R]
SINIKON Standart T-piece 45°, PP, d - 32*32 [Code number: 508001.R]
Details 		508001.R 105 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2 Angle Weight Colour
mm mm   kg  
32 32 45° 0,040 Gray
Photo Draft
Photo СИНИКОН Comfort Plus T-piece 87°, d - 32, d1 - 32, (50 pcs per package) [Code number: 508005.K] Draft СИНИКОН Comfort Plus T-piece 87°, d - 32, d1 - 32, (50 pcs per package) [Code number: 508005.K]
СИНИКОН Comfort Plus T-piece 87°, d - 32, d1 - 32, (50 pcs per package) [Code number: 508005.K]
Details 		508005.K 147 rub
Photo Draft
Photo SINIKON Standart T-piece 87°, PP, d - 32*32 [Code number: 508005.R] Draft SINIKON Standart T-piece 87°, PP, d - 32*32 [Code number: 508005.R]
SINIKON Standart T-piece 87°, PP, d - 32*32 [Code number: 508005.R]
Details 		508005.R 105 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2 Angle Weight Colour
mm mm   kg  
32 32 87° 0,040 Gray
Photo Draft
Photo SINIKON Comfort Plus T-piece 45°, PP, d - 40x40 [Code number: 508007.K] Draft SINIKON Comfort Plus T-piece 45°, PP, d - 40x40 [Code number: 508007.K]
SINIKON Comfort Plus T-piece 45°, PP, d - 40x40 [Code number: 508007.K]
Details 		508007.K 147 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d d2 Angle Wall thickness Colour
mm mm   mm  
40 40 45° 2,7 white
Photo Draft
Photo SINIKON Standart T-piece 45°, PP, d - 40*40 [Code number: 508007.R] Draft SINIKON Standart T-piece 45°, PP, d - 40*40 [Code number: 508007.R]
SINIKON Standart T-piece 45°, PP, d - 40*40 [Code number: 508007.R]
Details 		508007.R 105 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2 Angle Weight Colour
mm mm   kg  
40 40 45° 0,065 Gray
Photo Draft
Photo SINIKON Comfort Plus T-piece 87°, PP, d - 40x40 [Code number: 508011.K] Draft SINIKON Comfort Plus T-piece 87°, PP, d - 40x40 [Code number: 508011.K]
SINIKON Comfort Plus T-piece 87°, PP, d - 40x40 [Code number: 508011.K]
Details 		508011.K 147 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d d2 Angle Wall thickness Colour
mm mm   mm  
40 40 87° 2,7 white
Photo Draft
Photo SINIKON Standart T-piece 87°, PP, d - 40*40 [Code number: 508011.R] Draft SINIKON Standart T-piece 87°, PP, d - 40*40 [Code number: 508011.R]
SINIKON Standart T-piece 87°, PP, d - 40*40 [Code number: 508011.R]
Details 		508011.R 105 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2 Angle Weight Colour
mm mm   kg  
40 40 87° 0,065 Gray
© Inrusstrade.ru 1999-2026. "Inrusstrade" Ltd. Copying and quoting is prohibited

Privacy policy