Logo
Ru| En

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Name Article Price
Photo Draft
Photo Hutterer & Lechner Urinal trap for bowls with vertical outlet, DN40 [Code number: HL 431/40] Draft Hutterer & Lechner Urinal trap for bowls with vertical outlet, DN40 [Code number: HL 431/40]
Hutterer & Lechner Urinal trap for bowls with vertical outlet, DN40 [Code number: HL 431/40]
Details 		HL 431/40 6 229 rub

Urinal trap HL 431/40 with vertical outlet DN40. It is made of polypropylene. The trap is equipped with lip seal and swivelling connector (0°- 90°).

Diameter Material Weight
DN, mm   gr
40 polypropylene 250
Photo Draft
Photo Hutterer & Lechner Urinal trap for bowls with vertical outlet, DN50 [Code number: HL 431/50] Draft Hutterer & Lechner Urinal trap for bowls with vertical outlet, DN50 [Code number: HL 431/50]
Hutterer & Lechner Urinal trap for bowls with vertical outlet, DN50 [Code number: HL 431/50]
Details 		HL 431/50 6 229 rub

Urinal trap HL 431/50 with vertical outlet DN50. It is made of polypropylene. The trap is equipped with lip seal and swivelling connector (0°- 90°).

Diameter Material Weight
DN, mm   gr
50 polypropylene 260
Photo Draft
Photo Hutterer & Lechner Urinal trap, e.g. for Keramag 'Joly', DN40 [Code number: HL 432/40] Draft Hutterer & Lechner Urinal trap, e.g. for Keramag 'Joly', DN40 [Code number: HL 432/40]
Hutterer & Lechner Urinal trap, e.g. for Keramag 'Joly', DN40 [Code number: HL 432/40]
Details 		HL 432/40 5 077 rub

Urinal trap HL 432/40 with horizontal outlet DN40. It is made of polypropylene. For Keramag 'Joly'. The trap is equipped with lip seal and swivelling connector (0°- 90°).

Diameter Material Weight
DN, mm   gr
40 polypropylene 190
Photo Draft
Photo Hutterer & Lechner Urinal trap, e.g. for Keramag 'Joly', DN50 [Code number: HL 432/50] Draft Hutterer & Lechner Urinal trap, e.g. for Keramag 'Joly', DN50 [Code number: HL 432/50]
Hutterer & Lechner Urinal trap, e.g. for Keramag 'Joly', DN50 [Code number: HL 432/50]
Details 		HL 432/50 5 077 rub

Urinal trap HL 432/50 with horizontal outlet DN50. It is made of polypropylene. For Keramag 'Joly'. The trap is equipped with lip seal and swivelling connector (0°- 90°).

Diameter Material Weight
DN, mm   gr
50 polypropylene 195
Photo Draft
Photo Hutterer & Lechner Recessed washing device trap, DN40/50 [Code number: HL 440] Draft Hutterer & Lechner Recessed washing device trap, DN40/50 [Code number: HL 440]
Hutterer & Lechner Recessed washing device trap, DN40/50 [Code number: HL 440]
Details 		HL 440 2 189 rub

Recessed washing device trap HL 440 is equipped with a cleaning eye and stainless steel coverplate 160 x 110 mm. Capacity is 0.33 l/s. Minimum installation depth 55 mm.

Diameter Capacity Material Weight
DN mm l/s   gr
40/50 0,33 PE 200
Photo
Photo Hutterer & Lechner Bath tub trap with ball-joint, DN40/50x1 1/4' [Code number: HL 500-5/4]
Hutterer & Lechner Bath tub trap with ball-joint, DN40/50x1 1/4' [Code number: HL 500-5/4]
Details 		HL 500-5/4 2 145 rub

Application area:

  • For bath

Characteristics:

  • Material: PP/PE
  • Dimension: DN40/50 x 5/4"
  • Capacity: 0,83 l/s
  • Installation height: 93 mm

Weight: 0,09 kg

 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
80 100 252 0,098 0,002016000
Photo Draft
Photo Hutterer & Lechner Shower gutter to be used in the surface, without cover, horizontal, length 1000mm, DN 50 [Code number: HL 50F.0/100] Draft Hutterer & Lechner Shower gutter to be used in the surface, without cover, horizontal, length 1000mm, DN 50 [Code number: HL 50F.0/100]
Hutterer & Lechner Shower gutter to be used in the surface, without cover, horizontal, length 1000mm, DN 50 [Code number: HL 50F.0/100]
Details 		HL 50F.0/100 78 505 rub

The HL Company produces shower gutter HL 50F.0/100 with PP drain with ball joint DN50 with horizontal outlet. Length is 1000 mm. Height of siphon cartridge is 50 mm. Body of gutter with sanded flange for connection to hydroinsulation. Capacity of shower gutter is 0.8 l/s, and load class is K3 - 300kg. Included adjustable screws pads.

Diameter Size, mm Capacity Load Weight
DN, mm L H min l/s kg gr
50 1000 110 0,8 300 3224
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 4,055 0,0513375
Photo Draft
Photo Hutterer & Lechner Stainless steel shower gutter to be used in the surface with 2 PP drains, without cover, horizontal, length 1000mm, DN 50 [Code number: HL 50F.0/100.2] Draft Hutterer & Lechner Stainless steel shower gutter to be used in the surface with 2 PP drains, without cover, horizontal, length 1000mm, DN 50 [Code number: HL 50F.0/100.2]
Hutterer & Lechner Stainless steel shower gutter to be used in the surface with 2 PP drains, without cover, horizontal, length 1000mm, DN 50 [Code number: HL 50F.0/100.2]
Details 		HL 50F.0/100.2 118 349 rub

The HL Company produces shower gutter HL 50F.0/100.2 with PP drain with ball joint. Height of siphon cartridge is 50 mm. Body of gutter with sanded flange for connection to hydroinsulation. Included adjustable screws pads.

Diameter Size, mm Load
DN, mm L H kg
50 1000 110-128 300
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 4,055 0,0513375
Photo Draft
Photo Hutterer & Lechner Shower gutter to be used in the surface, without cover, horizontal, length 1100mm, DN 50 [Code number: HL 50F.0/110] Draft Hutterer & Lechner Shower gutter to be used in the surface, without cover, horizontal, length 1100mm, DN 50 [Code number: HL 50F.0/110]
Hutterer & Lechner Shower gutter to be used in the surface, without cover, horizontal, length 1100mm, DN 50 [Code number: HL 50F.0/110]
Details 		HL 50F.0/110 80 671 rub

The HL Company produces shower gutter HL 50F.0/110 with PP drain with ball joint DN50 with horizontal outlet. Length is 1100 mm. Height of siphon cartridge is 50 mm. Body of gutter with sanded flange for connection to hydroinsulation. Capacity of shower gutter is 0.8 l/s, and load class is K3 - 300kg. Included adjustable screws pads.

Diameter Size, mm Capacity Load Weight
DN, mm L H min l/s kg gr
50 1100 110 0,8 300 3525
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 4,356 0,0513375
Photo Draft
Photo Hutterer & Lechner Stainless steel shower gutter to be used in the surface with 2 drains, without cover, horizontal, length 1100mm, DN 50 [Code number: HL 50F.0/110.2] Draft Hutterer & Lechner Stainless steel shower gutter to be used in the surface with 2 drains, without cover, horizontal, length 1100mm, DN 50 [Code number: HL 50F.0/110.2]
Hutterer & Lechner Stainless steel shower gutter to be used in the surface with 2 drains, without cover, horizontal, length 1100mm, DN 50 [Code number: HL 50F.0/110.2]
Details 		HL 50F.0/110.2 120 808 rub

The HL Company produces shower gutter HL 50F.0/110.2 with PP drain with ball joint. Height of siphon cartridge is 50 mm. Body of gutter with sanded flange for connection to hydroinsulation. Included adjustable screws pads.

Diameter Size, mm Drains Load
DN, mm L H pc kg
50 1100 110-128 2 300
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 4,356 0,0513375
Photo Draft
Photo Hutterer & Lechner Shower gutter to be used in the surface, but without cover, horizontal, length 1200mm, DN 50 [Code number: HL 50F.0/120] Draft Hutterer & Lechner Shower gutter to be used in the surface, but without cover, horizontal, length 1200mm, DN 50 [Code number: HL 50F.0/120]
Hutterer & Lechner Shower gutter to be used in the surface, but without cover, horizontal, length 1200mm, DN 50 [Code number: HL 50F.0/120]
Details 		HL 50F.0/120 84 685 rub

The HL Company produces shower gutter HL 50F.0/120 with PP drain with ball joint DN50 with horizontal outlet. Length is 1200 mm. Height of siphon cartridge is 50 mm. Body of gutter with sanded flange for connection to hydroinsulation. Capacity of shower gutter is 0.8 l/s, and load class is K3 - 300kg. Included adjustable screws pads.

Diameter Size, mm Capacity Load Weight
DN, mm L H min l/s kg gr
50 1200 110 0,8 300 3760
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 4,591 0,0513375
Photo Draft
Photo Hutterer & Lechner Shower gutter to be used in the surface with 2 siphones, but without cover, horizontal, length 1200mm, DN 50 [Code number: HL 50F.0/120 + 2 Sifone] Draft Hutterer & Lechner Shower gutter to be used in the surface with 2 siphones, but without cover, horizontal, length 1200mm, DN 50 [Code number: HL 50F.0/120 + 2 Sifone]
Hutterer & Lechner Shower gutter to be used in the surface with 2 siphones, but without cover, horizontal, length 1200mm, DN 50 [Code number: HL 50F.0/120 + 2 Sifone]
Details 		HL 50F.0/120 + 2 Sifone 146 800 rub

Application area:

  • For barriere-free showers

Characteristics:

  • Material: stainless steel, PP
  • Dimension: 2 x DN50
  • capacity: 1,4 l/s
  • installation height: min. 110 mm
  • load class: Leaf catcher K3 - 300kg
  • standards: EN1253

Weight: 4,017 kg

 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1450 4,92 0,049626250
Photo Draft
Photo Hutterer & Lechner Shower gutter to be used in the surface, but without cover, horizontal, length 1300mm, DN 50 [Code number: HL 50F.0/130] Draft Hutterer & Lechner Shower gutter to be used in the surface, but without cover, horizontal, length 1300mm, DN 50 [Code number: HL 50F.0/130]
Hutterer & Lechner Shower gutter to be used in the surface, but without cover, horizontal, length 1300mm, DN 50 [Code number: HL 50F.0/130]
Details 		HL 50F.0/130 113 104 rub

The HL Company produces shower gutter HL 50F.0/130 with PP drain with ball joint DN50 with horizontal outlet. Length is 1300 mm. Height of siphon cartridge is 50 mm. Body of gutter with sanded flange for connection to hydroinsulation. Capacity of shower gutter is 0.8 l/s, and load class is K3 - 300kg. Included adjustable screws pads.

Diameter Size, mm Capacity Load Weight
DN, mm L H min l/s kg gr
50 1300 110 0,8 300 3966
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 4,797 0,0513375
Photo Draft
Photo Hutterer & Lechner Shower gutter to be used in the surface, but without cover, horizontal, length 1400mm, DN 50 [Code number: HL 50F.0/140] Draft Hutterer & Lechner Shower gutter to be used in the surface, but without cover, horizontal, length 1400mm, DN 50 [Code number: HL 50F.0/140]
Hutterer & Lechner Shower gutter to be used in the surface, but without cover, horizontal, length 1400mm, DN 50 [Code number: HL 50F.0/140]
Details 		HL 50F.0/140 156 166 rub

The HL Company produces shower gutter HL 50F.0/140 with 2x PP drain with ball joint DN50 with horizontal outlet. Length is 1400 mm. Height of siphon cartridge is 50 mm. Body of gutter with sanded flange for connection to hydroinsulation. Capacity of shower gutter is 0.8 l/s, and load class is K3 - 300kg. Included adjustable screws pads.

Diameter Size, mm LY Capacity Load Weight
DN, mm L H min mm l/s kg gr
50 1400 110 500 1,4 300 5840
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 6,344 0,0513375
Photo Draft
Photo Hutterer & Lechner Shower gutter to be used in the surface, but without cover, horizontal, length 1500mm, DN 50 [Code number: HL 50F.0/150] Draft Hutterer & Lechner Shower gutter to be used in the surface, but without cover, horizontal, length 1500mm, DN 50 [Code number: HL 50F.0/150]
Hutterer & Lechner Shower gutter to be used in the surface, but without cover, horizontal, length 1500mm, DN 50 [Code number: HL 50F.0/150]
Details 		HL 50F.0/150 160 427 rub

The HL Company produces shower gutter HL 50F.0/150 with 2x PP drain with ball joint DN50 with horizontal outlet. Length is 1500 mm. Height of siphon cartridge is 50 mm. Body of gutter with sanded flange for connection to hydroinsulation. Capacity of shower gutter is 0.8 l/s, and load class is K3 - 300kg. Included adjustable screws pads.

Diameter Size, mm LY Capacity Load Weight
DN, mm L H min mm l/s kg gr
50 1500 110 500 1,4 300 6120
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 6,905 0,0513375
Photo Draft
Photo Hutterer & Lechner Stainless steel shower gutter to be used in the surface with 2 drains, without cover, horizontal, length 1600 mm, DN 50 [Code number: HL 50F.0/160] Draft Hutterer & Lechner Stainless steel shower gutter to be used in the surface with 2 drains, without cover, horizontal, length 1600 mm, DN 50 [Code number: HL 50F.0/160]
Hutterer & Lechner Stainless steel shower gutter to be used in the surface with 2 drains, without cover, horizontal, length 1600 mm, DN 50 [Code number: HL 50F.0/160]
Details 		HL 50F.0/160 164 701 rub

The HL Company produces shower gutter HL 50F.0/160 with PP drain with ball joint. Height of siphon cartridge is 50 mm. Body of gutter with sanded flange for connection to hydroinsulation. Included adjustable screws pads.

Diameter Size, mm Capasity Load Weight
DN, mm L H l/s kg kg
50 1600 110-128 1,4 300 4,848
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 7,161 0,0513375
Photo Draft
Photo Hutterer & Lechner Shower gutter to be used in the surface, but without cover, horizontal, length 1700mm, DN 50 [Code number: HL 50F.0/170] Draft Hutterer & Lechner Shower gutter to be used in the surface, but without cover, horizontal, length 1700mm, DN 50 [Code number: HL 50F.0/170]
Hutterer & Lechner Shower gutter to be used in the surface, but without cover, horizontal, length 1700mm, DN 50 [Code number: HL 50F.0/170]
Details 		HL 50F.0/170 168 961 rub

The HL Company produces shower gutter HL 50F.0/170 with 2x PP drain with ball joint DN50 with horizontal outlet. Length is 1700 mm. Height of siphon cartridge is 50 mm. Body of gutter with sanded flange for connection to hydroinsulation. Capacity of shower gutter is 0.8 l/s, and load class is K3 - 300kg. Included adjustable screws pads.

Diameter Size, mm LY Capacity Load Weight
DN, mm L H min mm l/s kg gr
50 1700 110 600 1,4 300 6600
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 7,575 0,0513375
Photo Draft
Photo Hutterer & Lechner Shower gutter to be used in the surface, but without cover, horizontal, length 1800mm, DN 50 [Code number: HL 50F.0/180] Draft Hutterer & Lechner Shower gutter to be used in the surface, but without cover, horizontal, length 1800mm, DN 50 [Code number: HL 50F.0/180]
Hutterer & Lechner Shower gutter to be used in the surface, but without cover, horizontal, length 1800mm, DN 50 [Code number: HL 50F.0/180]
Details 		HL 50F.0/180 173 224 rub

The HL Company produces shower gutter HL 50F.0/180 with 2x PP drain with ball joint DN50 with horizontal outlet. Length is 1800 mm. Height of siphon cartridge is 50 mm. Body of gutter with sanded flange for connection to hydroinsulation. Capacity of shower gutter is 0.8 l/s, and load class is K3 - 300kg. Included adjustable screws pads.

Diameter Size, mm LY Capacity Load Weight
DN, mm L H min mm l/s kg gr
50 1800 110 700 1,4 300 6820
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 8,021 0,0513375
Photo Draft
Photo Hutterer & Lechner Stainless steel shower gutter to be used in the surface with 2 PP drains, without cover, horizontal, length 1900 mm, DN 50 [Code number: HL 50F.0/190] Draft Hutterer & Lechner Stainless steel shower gutter to be used in the surface with 2 PP drains, without cover, horizontal, length 1900 mm, DN 50 [Code number: HL 50F.0/190]
Hutterer & Lechner Stainless steel shower gutter to be used in the surface with 2 PP drains, without cover, horizontal, length 1900 mm, DN 50 [Code number: HL 50F.0/190]
Details 		HL 50F.0/190 179 291 rub

The HL Company produces shower gutter HL 50F.0/190 with PP drain with ball joint. Height of siphon cartridge is 50 mm. Body of gutter with sanded flange for connection to hydroinsulation. Included adjustable screws pads.

Diameter Size, mm Capasity Load Weight
DN, mm L H l/s kg kg
50 1900 110-128 1,4 300 5,665
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 8,27 0,0513375
Photo Draft
Photo Hutterer & Lechner Shower gutter to be used in the surface, but without cover, horizontal, length 2000mm, DN 50 [Code number: HL 50F.0/200] Draft Hutterer & Lechner Shower gutter to be used in the surface, but without cover, horizontal, length 2000mm, DN 50 [Code number: HL 50F.0/200]
Hutterer & Lechner Shower gutter to be used in the surface, but without cover, horizontal, length 2000mm, DN 50 [Code number: HL 50F.0/200]
Details 		HL 50F.0/200 181 762 rub

The HL Company produces shower gutter HL 50F.0/200 with 2x PP drain with ball joint DN50 with horizontal outlet. Length is 2000 mm. Height of siphon cartridge is 50 mm. Body of gutter with sanded flange for connection to hydroinsulation. Capacity of shower gutter is 0.8 l/s, and load class is K3 - 300kg. Included adjustable screws pads.

Diameter Size, mm LY Capacity Load Weight
DN, mm L H min mm l/s kg gr
50 2000 110 800 1,4 300 7240
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 8,51 0,0513375

© Inrusstrade.ru 1999-2024. "Inrusstrade" Ltd. Copying and quoting is prohibited