Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Leninsky urban district

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Наименование Article Цена
Photo
Photo RTP BETA Eccentric reduction, d - 110, d1 - 50, for internal sewerage, socket connection, PP, gray (BAREON) [Code number: 47413 (RTP)]
RTP BETA Eccentric reduction, d - 110, d1 - 50, for internal sewerage, socket connection, PP, gray (BAREON) [Code number: 47413 (RTP)]
Details 		47413 (RTP) 96 rub
Photo
Photo RTP BETA T-piece 87°, d - 50, d1 - 50, for internal sewerage, socket connection, PP, gray (BAREON) [Code number: 47415 (RTP)]
RTP BETA T-piece 87°, d - 50, d1 - 50, for internal sewerage, socket connection, PP, gray (BAREON) [Code number: 47415 (RTP)]
Details 		47415 (RTP) 88 rub
Photo
Photo RTP BETA T-piece 45°, d - 110, d1 - 110, for internal sewerage, socket connection, PP, gray (BAREON) [Code number: 47416 (RTP)]
RTP BETA T-piece 45°, d - 110, d1 - 110, for internal sewerage, socket connection, PP, gray (BAREON) [Code number: 47416 (RTP)]
Details 		47416 (RTP) 249 rub
Photo
Photo RTP BETA T-piece 45°, d - 110, d1 - 50, for internal sewerage, socket connection, PP, gray (BAREON) [Code number: 47418 (RTP)]
RTP BETA T-piece 45°, d - 110, d1 - 50, for internal sewerage, socket connection, PP, gray (BAREON) [Code number: 47418 (RTP)]
Details 		47418 (RTP) 168 rub
Photo Draft
Photo SINIKON Standart Bend 30°, PP, d - 32 [Code number: 504003CR] Draft SINIKON Standart Bend 30°, PP, d - 32 [Code number: 504003CR]
SINIKON Standart Bend 30°, PP, d - 32 [Code number: 504003CR]
Details 		504003CR 115 rub

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: PP-H polypropylene.

Material density: 0.9-0.95 g/cm3.

Maximum operating temperature: +80 °C (short-term up to +95 °C).

Melting point: +160 °С.

Main advantages of the SINIKON Standard system:

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Colour
mm    
32 30˚ Metallic grey
Photo Draft
Photo SINIKON Standart Bend 45°, PP, d - 32 [Code number: 504005.R] Draft SINIKON Standart Bend 45°, PP, d - 32 [Code number: 504005.R]
SINIKON Standart Bend 45°, PP, d - 32 [Code number: 504005.R]
Details 		504005.R 49 rub

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Weight Colour
mm   kg  
32 45° 0,020 Gray
Photo Draft
Photo SINIKON Standart Bend 67°, PP, d - 32 [Code number: 504007CR] Draft SINIKON Standart Bend 67°, PP, d - 32 [Code number: 504007CR]
SINIKON Standart Bend 67°, PP, d - 32 [Code number: 504007CR]
Details 		504007CR 191 rub

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: PP-H polypropylene.

Material density: 0.9-0.95 g/cm3.

Maximum operating temperature: +80 °C (short-term up to +95 °C).

Melting point: +160 °С.

Main advantages of the SINIKON Standard system:

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Colour
mm    
32 67˚ Metallic grey
Photo Draft
Photo SINIKON Standart Bend 87°, PP, d - 32 [Code number: 504011.R] Draft SINIKON Standart Bend 87°, PP, d - 32 [Code number: 504011.R]
SINIKON Standart Bend 87°, PP, d - 32 [Code number: 504011.R]
Details 		504011.R 49 rub

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Weight Colour
mm   kg  
32 87° 0,025 Gray
Photo Draft
Photo SINIKON Comfort Plus Bend 15°, d - 40 [Code number: 504013.K] Draft SINIKON Comfort Plus Bend 15°, d - 40 [Code number: 504013.K]
SINIKON Comfort Plus Bend 15°, d - 40 [Code number: 504013.K]
Details 		504013.K 68 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d Angle Wall thickness Colour
mm   mm  
40 15° 2,7 white
Photo Draft
Photo SINIKON Standart Bend 15°, PP, d - 40 [Code number: 504013.R] Draft SINIKON Standart Bend 15°, PP, d - 40 [Code number: 504013.R]
SINIKON Standart Bend 15°, PP, d - 40 [Code number: 504013.R]
Details 		504013.R 49 rub

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Weight Colour
mm   kg  
40 15° 0,030 Gray
Photo Draft
Photo SINIKON Standart Bend 30°, PP, d - 40 [Code number: 504015CR] Draft SINIKON Standart Bend 30°, PP, d - 40 [Code number: 504015CR]
SINIKON Standart Bend 30°, PP, d - 40 [Code number: 504015CR]
Details 		504015CR 126 rub

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: PP-H polypropylene.

Material density: 0.9-0.95 g/cm3.

Maximum operating temperature: +80 °C (short-term up to +95 °C).

Melting point: +160 °С.

Main advantages of the SINIKON Standard system:

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Colour
mm    
40 30˚ Metallic grey
Photo Draft
Photo SINICON Comfort Plus Bend 30°, d - 40, PP [Code number: 504015.K] Draft SINICON Comfort Plus Bend 30°, d - 40, PP [Code number: 504015.K]
SINICON Comfort Plus Bend 30°, d - 40, PP [Code number: 504015.K]
Details 		504015.K 68 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d Angle Wall thickness Colour
mm   mm  
40 30° 2,7 white
Photo Draft
Photo (ARTICLE REPLACEMENT: 504015CR) - SINIKON Standart Bend 30°, PP, d - 40 [Code number: 504015.R] Draft (ARTICLE REPLACEMENT: 504015CR) - SINIKON Standart Bend 30°, PP, d - 40 [Code number: 504015.R]
(ARTICLE REPLACEMENT: 504015CR) - SINIKON Standart Bend 30°, PP, d - 40 [Code number: 504015.R]
Details 		504015.R 49 rub
ARTICLE REPLACEMENT: 504015CR

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Weight Colour
mm   kg  
40 30° 0,035 Gray
Photo Draft
Photo SINIKON Comfort Plus Bend 45°, PP, d - 40 [Code number: 504017.K] Draft SINIKON Comfort Plus Bend 45°, PP, d - 40 [Code number: 504017.K]
SINIKON Comfort Plus Bend 45°, PP, d - 40 [Code number: 504017.K]
Details 		504017.K 68 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d Angle Wall thickness Colour
mm   mm  
40 45° 2,7 white
Photo Draft
Photo SINIKON Standart Bend 45°, PP, d - 40 [Code number: 504017.R] Draft SINIKON Standart Bend 45°, PP, d - 40 [Code number: 504017.R]
SINIKON Standart Bend 45°, PP, d - 40 [Code number: 504017.R]
Details 		504017.R 49 rub

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Weight Colour
mm   kg  
40 45° 0,035 Gray
Photo Draft
Photo SINIKON Comfort Plus Bend 67°, d - 40 [Code number: 504019.K] Draft SINIKON Comfort Plus Bend 67°, d - 40 [Code number: 504019.K]
SINIKON Comfort Plus Bend 67°, d - 40 [Code number: 504019.K]
Details 		504019.K 68 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d Angle Wall thickness Colour
mm   mm  
40 67° 2,7 white
Photo Draft
Photo SINIKON Standart Bend 67°, PP, d - 40 [Code number: 504019.R] Draft SINIKON Standart Bend 67°, PP, d - 40 [Code number: 504019.R]
SINIKON Standart Bend 67°, PP, d - 40 [Code number: 504019.R]
Details 		504019.R 49 rub

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Weight Colour
mm   kg  
40 67° 0,035 Gray
Photo Draft
Photo SINIKON Comfort Plus Bend 87°, PP, d - 40 [Code number: 504023.K] Draft SINIKON Comfort Plus Bend 87°, PP, d - 40 [Code number: 504023.K]
SINIKON Comfort Plus Bend 87°, PP, d - 40 [Code number: 504023.K]
Details 		504023.K 68 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d Angle Wall thickness Colour
mm   mm  
40 87° 2,7 white
Photo Draft
Photo SINIKON Standart Bend 87°, PP, d - 40 [Code number: 504023.R] Draft SINIKON Standart Bend 87°, PP, d - 40 [Code number: 504023.R]
SINIKON Standart Bend 87°, PP, d - 40 [Code number: 504023.R]
Details 		504023.R 49 rub

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Weight Colour
mm   kg  
40 87° 0,040 Gray
Photo Draft
Photo SINIKON Comfort Plus Bend 15°, PP, d - 50 [Code number: 504025.K] Draft SINIKON Comfort Plus Bend 15°, PP, d - 50 [Code number: 504025.K]
SINIKON Comfort Plus Bend 15°, PP, d - 50 [Code number: 504025.K]
Details 		504025.K 92 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d Angle Wall thickness Colour
mm   mm  
50 15° 2,7 white
© Inrusstrade.ru 1999-2026. "Inrusstrade" Ltd. Copying and quoting is prohibited