Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Lenin Hills

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Наименование Article Цена
Photo Draft
Photo Chemkor Pressure pipelines Steel flange, blind, 1,0 MPa, d - 80 [Code number: 2180157] Draft Chemkor Pressure pipelines Steel flange, blind, 1,0 MPa, d - 80 [Code number: 2180157]
Chemkor Pressure pipelines Steel flange, blind, 1,0 MPa, d - 80 [Code number: 2180157]
Details 		2180157 1 786 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

The working pressure is 1,0 MPa.

Technical characteristics

Dn A Z F n B
mm mm mm mm mm mm
80 160 200 18 8 20

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo Chemkor Pressure pipelines Steel flange, blind, 1,0 MPa, d - 100 [Code number: 2180158] Draft Chemkor Pressure pipelines Steel flange, blind, 1,0 MPa, d - 100 [Code number: 2180158]
Chemkor Pressure pipelines Steel flange, blind, 1,0 MPa, d - 100 [Code number: 2180158]
Details 		2180158 1 974 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

The working pressure is 1,0 MPa.

Technical characteristics

Dn A Z F n B
mm mm mm mm mm mm
100 180 220 18 8 20

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo Chemkor Pressure pipelines Steel flange, blind, 1,0 MPa, d - 150 [Code number: 2180159] Draft Chemkor Pressure pipelines Steel flange, blind, 1,0 MPa, d - 150 [Code number: 2180159]
Chemkor Pressure pipelines Steel flange, blind, 1,0 MPa, d - 150 [Code number: 2180159]
Details 		2180159 3 478 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

The working pressure is 1,0 MPa.

Technical characteristics

Dn A Z F n B
mm mm mm mm mm mm
150 240 285 23 8 22

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo Chemkor Pressure pipelines Steel flange, blind, 1,0 MPa, d - 200 [Code number: 2180160] Draft Chemkor Pressure pipelines Steel flange, blind, 1,0 MPa, d - 200 [Code number: 2180160]
Chemkor Pressure pipelines Steel flange, blind, 1,0 MPa, d - 200 [Code number: 2180160]
Details 		2180160 5 711 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

The working pressure is 1,0 MPa.

Technical characteristics

Dn A Z F n B
mm mm mm mm mm mm
200 395 340 23 8 24

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo Chemkor Pressure pipelines Steel flange, blind, 1,0 MPa, d - 300 [Code number: 2180161] Draft Chemkor Pressure pipelines Steel flange, blind, 1,0 MPa, d - 300 [Code number: 2180161]
Chemkor Pressure pipelines Steel flange, blind, 1,0 MPa, d - 300 [Code number: 2180161]
Details 		2180161 10 904 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

The working pressure is 1,0 MPa.

Technical characteristics

Dn A Z F n B
mm mm mm mm mm mm
300 400 445 23 12 26

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo Chemkor Pressure pipelines Bend 45° with socket, uPVC, SDR 26, 1,0 MPa, d - 90 [Code number: 2181042] Draft Chemkor Pressure pipelines Bend 45° with socket, uPVC, SDR 26, 1,0 MPa, d - 90 [Code number: 2181042]
Chemkor Pressure pipelines Bend 45° with socket, uPVC, SDR 26, 1,0 MPa, d - 90 [Code number: 2181042]
Details 		2181042 4 869 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn Angle r Dвн Dрастр Lрастр Z1 Z2
mm mm mm mm mm mm mm
90 45° 250 80 118 125 527 380

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo Chemkor Pressure pipelines Bend 90° with socket, uPVC, SDR 26, 1,0 MPa, d - 90 [Code number: 2181043] Draft Chemkor Pressure pipelines Bend 90° with socket, uPVC, SDR 26, 1,0 MPa, d - 90 [Code number: 2181043]
Chemkor Pressure pipelines Bend 90° with socket, uPVC, SDR 26, 1,0 MPa, d - 90 [Code number: 2181043]
Details 		2181043 6 553 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn Angle r Dвн Dрастр Lрастр Z1 Z2
mm   mm mm mm mm mm mm
90 90° 250 80 118 125 527 380

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo Chemkor Pressure pipelines Bend 11° with socket, uPVC, SDR 26, 1,0 MPa, d - 110 [Code number: 2181044] Draft Chemkor Pressure pipelines Bend 11° with socket, uPVC, SDR 26, 1,0 MPa, d - 110 [Code number: 2181044]
Chemkor Pressure pipelines Bend 11° with socket, uPVC, SDR 26, 1,0 MPa, d - 110 [Code number: 2181044]
Details 		2181044 4 769 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn Angle r Dвн Dрастр Lрастр Z1 Z2
mm   mm mm mm mm mm mm
110 11° 300 97,8 142 135 341 209

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo Chemkor Pressure pipelines Bend 22° with socket, uPVC, SDR 26, 1,0 MPa, d - 110 [Code number: 2181045] Draft Chemkor Pressure pipelines Bend 22° with socket, uPVC, SDR 26, 1,0 MPa, d - 110 [Code number: 2181045]
Chemkor Pressure pipelines Bend 22° with socket, uPVC, SDR 26, 1,0 MPa, d - 110 [Code number: 2181045]
Details 		2181045 5 318 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn Angle r Dвн Dрастр Lрастр Z1 Z2
mm   mm mm mm mm mm mm
110 22° 300 97,8 142 135 363 238

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo Chemkor Pressure pipelines Bend 30° with socket, uPVC, SDR 26, 1,0 MPa, d - 110 [Code number: 2181046] Draft Chemkor Pressure pipelines Bend 30° with socket, uPVC, SDR 26, 1,0 MPa, d - 110 [Code number: 2181046]
Chemkor Pressure pipelines Bend 30° with socket, uPVC, SDR 26, 1,0 MPa, d - 110 [Code number: 2181046]
Details 		2181046 5 668 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn Angle r Dвн Dрастр Lрастр Z1 Z2
mm   mm mm mm mm mm mm
110 30° 300 97,8 142 135 393 260

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo Chemkor Pressure pipelines Bend 45° with socket, uPVC, SDR 26, 1,0 MPa, d - 110 [Code number: 2181047] Draft Chemkor Pressure pipelines Bend 45° with socket, uPVC, SDR 26, 1,0 MPa, d - 110 [Code number: 2181047]
Chemkor Pressure pipelines Bend 45° with socket, uPVC, SDR 26, 1,0 MPa, d - 110 [Code number: 2181047]
Details 		2181047 6 233 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn Angle r Dвн Dрастр Lрастр Z1 Z2
mm mm mm mm mm mm mm
110 45° 300 97,8 142 135 409 304

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo Chemkor Pressure pipelines Bend 60° with socket, uPVC, SDR 26, 1,0 MPa, d - 110 [Code number: 2181048] Draft Chemkor Pressure pipelines Bend 60° with socket, uPVC, SDR 26, 1,0 MPa, d - 110 [Code number: 2181048]
Chemkor Pressure pipelines Bend 60° with socket, uPVC, SDR 26, 1,0 MPa, d - 110 [Code number: 2181048]
Details 		2181048 7 774 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn Angle r Dвн Dрастр Lрастр Z1 Z2
mm mm mm mm mm mm mm
110 60° 300 97,8 142 135 479 353

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo Chemkor Pressure pipelines Bend 90° with socket, uPVC, SDR 26, 1,0 MPa, d - 110 [Code number: 2181049] Draft Chemkor Pressure pipelines Bend 90° with socket, uPVC, SDR 26, 1,0 MPa, d - 110 [Code number: 2181049]
Chemkor Pressure pipelines Bend 90° with socket, uPVC, SDR 26, 1,0 MPa, d - 110 [Code number: 2181049]
Details 		2181049 9 219 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn Angle r Dвн Dрастр Lрастр Z1 Z2
mm mm mm mm mm mm mm
110 90° 300 97,8 142 135 599 480

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo Chemkor Pressure pipelines Bend 11° with socket, uPVC, SDR 26, 1,0 MPa, d - 160 [Code number: 2181050] Draft Chemkor Pressure pipelines Bend 11° with socket, uPVC, SDR 26, 1,0 MPa, d - 160 [Code number: 2181050]
Chemkor Pressure pipelines Bend 11° with socket, uPVC, SDR 26, 1,0 MPa, d - 160 [Code number: 2181050]
Details 		2181050 10 956 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn Angle r Dвн Dрастр Lрастр Z1 Z2
mm   mm mm mm mm mm mm
160 11° 700 142,6 201 158 448 282

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo Chemkor Pressure pipelines Bend 22° with socket, uPVC, SDR 26, 1,0 MPa, d - 160 [Code number: 2181051] Draft Chemkor Pressure pipelines Bend 22° with socket, uPVC, SDR 26, 1,0 MPa, d - 160 [Code number: 2181051]
Chemkor Pressure pipelines Bend 22° with socket, uPVC, SDR 26, 1,0 MPa, d - 160 [Code number: 2181051]
Details 		2181051 12 905 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn Angle r Dвн Dрастр Lрастр Z1 Z2
mm   mm mm mm mm mm mm
160 22° 700 142,6 201 158 482 351

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo Chemkor Pressure pipelines Bend 30° with socket, uPVC, SDR 26, 1,0 MPa, d - 160 [Code number: 2181052] Draft Chemkor Pressure pipelines Bend 30° with socket, uPVC, SDR 26, 1,0 MPa, d - 160 [Code number: 2181052]
Chemkor Pressure pipelines Bend 30° with socket, uPVC, SDR 26, 1,0 MPa, d - 160 [Code number: 2181052]
Details 		2181052 14 027 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn Angle r Dвн Dрастр Lрастр Z1 Z2
mm   mm mm mm mm mm mm
160 30° 700 142,6 201 158 536 403

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo Chemkor Pressure pipelines Bend 45° with socket, uPVC, SDR 26, 1,0 MPa, d - 160 [Code number: 2181053] Draft Chemkor Pressure pipelines Bend 45° with socket, uPVC, SDR 26, 1,0 MPa, d - 160 [Code number: 2181053]
Chemkor Pressure pipelines Bend 45° with socket, uPVC, SDR 26, 1,0 MPa, d - 160 [Code number: 2181053]
Details 		2181053 17 594 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn Angle r Dвн Dрастр Lрастр Z1 Z2
mm mm mm mm mm mm mm
160 45° 700 142,6 201 158 605 505

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo Chemkor Pressure pipelines Bend 60° with socket, uPVC, SDR 26, 1,0 MPa, d - 160 [Code number: 2181054] Draft Chemkor Pressure pipelines Bend 60° with socket, uPVC, SDR 26, 1,0 MPa, d - 160 [Code number: 2181054]
Chemkor Pressure pipelines Bend 60° with socket, uPVC, SDR 26, 1,0 MPa, d - 160 [Code number: 2181054]
Details 		2181054 21 804 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn Angle r Dвн Dрастр Lрастр Z1 Z2
mm mm mm mm mm mm mm
160 60° 700 142,6 201 158 736 619

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo Chemkor Pressure pipelines Bend 90° with socket, uPVC, SDR 26, 1,0 MPa, d - 160 [Code number: 2181055] Draft Chemkor Pressure pipelines Bend 90° with socket, uPVC, SDR 26, 1,0 MPa, d - 160 [Code number: 2181055]
Chemkor Pressure pipelines Bend 90° with socket, uPVC, SDR 26, 1,0 MPa, d - 160 [Code number: 2181055]
Details 		2181055 24 583 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn Angle r Dвн Dрастр Lрастр Z1 Z2
mm mm mm mm mm mm mm
160 90° 700 142,6 201 158 1015 915

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo Chemkor Pressure pipelines Bend 11° with socket, uPVC, SDR 26, 1,0 MPa, d - 225 [Code number: 2181056] Draft Chemkor Pressure pipelines Bend 11° with socket, uPVC, SDR 26, 1,0 MPa, d - 225 [Code number: 2181056]
Chemkor Pressure pipelines Bend 11° with socket, uPVC, SDR 26, 1,0 MPa, d - 225 [Code number: 2181056]
Details 		2181056 29 498 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn Angle r Dвн Dрастр Lрастр Z1 Z2
mm   mm mm mm mm mm mm
225 11° 900 200,8 277 183 524 377

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
© Inrusstrade.ru 1999-2025. "Inrusstrade" Ltd. Copying and quoting is prohibited