Fittings for domestic sewerage

Watch products by Brands

When installing internal sewage, special fittings are used that are connected to pipes:

Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
Crosses are used to create two branches (in some cases three) from the main pipeline.
Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
Reducers are used to connect sewer pipes with different diameters.
Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
Siphons are mounted with sanitary equipment.
Brackets allow you to rigidly fix the pipeline system.
Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.

Photo Наименование Article Цена

Chemkor Pressure pipelines Bend 45° double-socket, d - 225 [Code number: 2181156]

Details

2181156

8 232 rub

Chemkor Pressure pipelines Bend 90° double-socket, d - 225 [Code number: 2181157]

Details

2181157

9 391 rub

Chemkor Pressure pipelines T-piece, uPVC, SDR 26, 1,0 MPa, с резьбовым выходом, d - 110, d1 - 2" [Code number: 2181162]

Details

2181162

2 105 rub

Purpose of application:

For domestic and drinking water supply
For residential and industrial buildings, as well as agricultural enterprises
For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
For vertical internal gutters
For pressure sewerage (if it is not possible to divert sewage by gravity)
For branching pipeline

Characteristics:

High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
Resistance to microorganisms, fungi and bacteria;
Fast installation;
Socket connection (sealing ring made of EPDM);
High resistance to alkalis, acids and surfactants;
The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
Refers to the flammability class G1 (GOST 30244-94);
Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn	G	L	L1
mm		mm	mm
110	2"	340	81

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Chemkor Pressure pipelines T-piece, uPVC, SDR 26, 1,0 MPa, с резьбовым выходом, d - 160, d1 - 2" [Code number: 2181163]

Details

2181163

4 402 rub

Purpose of application:

For domestic and drinking water supply
For residential and industrial buildings, as well as agricultural enterprises
For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
For vertical internal gutters
For pressure sewerage (if it is not possible to divert sewage by gravity)
For branching pipeline

Characteristics:

High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
Resistance to microorganisms, fungi and bacteria;
Fast installation;
Socket connection (sealing ring made of EPDM);
High resistance to alkalis, acids and surfactants;
The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
Refers to the flammability class G1 (GOST 30244-94);
Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn	G	L	L1
mm		mm	mm
160	2"	380	103

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Ostendorf KG Bend 15° KGB, d - 110 [Code number: 220200]

Details

220200

334 rub

Application purpose:

For outdoor sewerage

Colour: Orange-brown RAL 8023.

Material: Hard polyvinyl chloride (rigid PVC), without plasticizers and fillers.

DN	α	z1	z2	l1
mm		mm	mm	mm
110	15°	9	14	69

Download the installation instructions of product: Ostendorf KG Bend 15°

Ostendorf KG Bend 30° KGB, d - 110 [Code number: 220210]

Details

220210

381 rub

Application purpose:

For outdoor sewerage

Colour: Orange-brown RAL 8023.

Material: Hard polyvinyl chloride (rigid PVC), without plasticizers and fillers.

DN	α	z1	z2	l1
mm		mm	mm	mm
110	30°	17	21	86

Download the installation instructions of product: Ostendorf KG Bend 30°

Ostendorf KG Bend 45° KGB, d - 110 [Code number: 220220]

Details

220220

403 rub

Application purpose:

For outdoor sewerage

Colour: Orange-brown RAL 8023.

Material: Hard polyvinyl chloride (rigid PVC), without plasticizers and fillers.

DN	α	z1	z2	l1
mm		mm	mm	mm
110	45°	25	29	85

Download the installation instructions of product: Ostendorf KG Bend 45°

Ostendorf KG Bend 67° KGB, d - 110 [Code number: 220230]

Details

220230

423 rub

Application purpose:

For outdoor sewerage

Colour: Orange-brown RAL 8023.

Material: Hard polyvinyl chloride (rigid PVC), without plasticizers and fillers.

DN	α	z1	z2	l1
mm		mm	mm	mm
110	67°	40	44	100

Download the installation instructions of product: Ostendorf KG Bend 67°

Ostendorf KG Bend 87° KGB, d - 110 [Code number: 220240]

Details

220240

474 rub

Application purpose:

For outdoor sewerage

Colour: Orange-brown RAL 8023.

Material: Hard polyvinyl chloride (rigid PVC), without plasticizers and fillers.

DN	α	z1	z2	l1
mm		mm	mm	mm
110	87°	59	61	119

Download the installation instructions of product: Ostendorf KG Bend 87°

Ostendorf KG Branch 45° KGEA, d - 110/110 [Code number: 220300]

Details

220300

975 rub

Application purpose:

For outdoor sewerage

Colour: Orange-brown RAL 8023.

Material: Hard polyvinyl chloride (rigid PVC), without plasticizers and fillers.

DN	α	z1	z2	z3	l1
mm		mm	mm	mm	mm
110/110	45°	25	134	134	219

Download the installation instructions of product: Ostendorf KG Branch 45°

Ostendorf KG T-piece 45° KGEA three-socket, d - 110, d1 - 110 [Code number: 220310]

Details

220310

1 390 rub

Ostendorf KG Branch 87° KGEA, d - 110/110 [Code number: 220400]

Details

220400

889 rub

Application purpose:

For outdoor sewerage

Colour: Orange-brown RAL 8023.

Material: Hard polyvinyl chloride (rigid PVC), without plasticizers and fillers.

DN	α	z1	z2	z3	L
mm		mm	mm	mm	mm
110/110	87°	59	62	62	197

Download the installation instructions of product: Ostendorf KG Branch 87°

Ostendorf KG T-piece 87° KGEA three-socket, d - 110, d1 - 110 [Code number: 220410]

Details

220410

1 390 rub

Ostendorf KG Inspection pipe KGRE, d - 110 [Code number: 220600]

Details

220600

2 836 rub

Application purpose:

For outdoor sewerage
For inspection of drainage system

Colour: Orange-brown RAL 8023.

Material: Hard polyvinyl chloride (rigid PVC), without plasticizers and fillers.

DN	L
mm	mm
110	288

Download the installation instructions of product: Ostendorf KG Inspection pipe

Ostendorf KG Plug KGM, d - 110 [Code number: 220620]

Details

220620

180 rub

Application purpose:

For outdoor sewerage
For closing the pipe end

Colour: Orange-brown RAL 8023.

Material: Hard polyvinyl chloride (rigid PVC), without plasticizers and fillers.

DN	l
mm	mm
110	40

Download the installation instructions of product: Ostendorf KG Plug

Ostendorf KG Cap KGK, d - 110 [Code number: 220630]

Details

220630

242 rub

Application purpose:

For outdoor sewerage
For closing the plain end of pipe

Colour: Orange-brown RAL 8023.

Material: Hard polyvinyl chloride (rigid PVC), without plasticizers and fillers.

DN	l
mm	mm
110	43

Download the installation instructions of product: Ostendorf KG Cap

Ostendorf KG Inspection pipe KGRE (round hatch), d - 110 [Code number: 220640]

Details

220640

4 660 rub

Ostendorf KG Connection piece KGUG to cast-iron pipes, d - 110 [Code number: 220820]

Details

220820

804 rub

Application purpose:

For outdoor sewerage

Colour: Orange-brown RAL 8023.

Material: Hard polyvinyl chloride (rigid PVC), without plasticizers and fillers.

Sealing: GA-Set, GA-Lip seals.

DN	d6	l	L
mm	mm	mm	mm
110	131	133	76

Download the installation instructions of product: Ostendorf KG Connection piece

Ostendorf KG Connection piece KGUS to stoneware pipe (spigot end), d - 110 [Code number: 220830]

Details

220830

1 327 rub

Application purpose:

For outdoor sewerage

Colour: Orange-brown RAL 8023.

Material: Hard polyvinyl chloride (rigid PVC), without plasticizers and fillers.

DN	d	D	L
mm	mm	mm	mm
110	138	156	60

Download the installation instructions of product: Ostendorf KG Connection piece

Ostendorf KG Connection piece KGUSM to stoneware pipe (socket), d - 110 [Code number: 220840]

Details

220840

1 355 rub

Application purpose:

For outdoor sewerage

Colour: Orange-brown RAL 8023.

Material: Hard polyvinyl chloride (rigid PVC), without plasticizers and fillers.

DN	D	L
mm	mm	mm
110	132	70

Download the installation instructions of product: Ostendorf KG Connection piece