Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Lenin Hills

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Наименование Article Цена
Photo Draft
Photo Wavin PVC Pressure Pipe systems End cap, PN16, d - 200 [Code number: 20160355] Draft Wavin PVC Pressure Pipe systems End cap, PN16, d - 200 [Code number: 20160355]
Wavin PVC Pressure Pipe systems End cap, PN16, d - 200 [Code number: 20160355]
Details 		20160355

ATTENTION! This product is temporarily unavailable for order!

PN d B
bar mm mm
16 200 107
Photo Draft
Photo Wavin PVC Pressure Pipe systems T-piece (flange/socket), d - 225*110*225 [Code number: 20162018] Draft Wavin PVC Pressure Pipe systems T-piece (flange/socket), d - 225*110*225 [Code number: 20162018]
Wavin PVC Pressure Pipe systems T-piece (flange/socket), d - 225*110*225 [Code number: 20162018]
Details 		20162018

ATTENTION! This product is temporarily unavailable for order!

D1 D3 B1 Z1 L PN
mm mm mm mm mm bar
225-110-225 110 150 75 250 10
Photo Draft
Photo Wavin PVC Pressure Pipe systems Bend 45° with Wavisafe socket, PN 6, d - 500 [Code number: 20182043] Draft Wavin PVC Pressure Pipe systems Bend 45° with Wavisafe socket, PN 6, d - 500 [Code number: 20182043]
Wavin PVC Pressure Pipe systems Bend 45° with Wavisafe socket, PN 6, d - 500 [Code number: 20182043]
Details 		20182043

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 10 bar. It differs by special connection of "Wavisafe" type which provides simple, fast and reliable installation. It is used for changing the direction of the pipeline by 45°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

Color: gray.

Dy Di Du L2 r Z1 Z2 M α
mm mm mm mm mm mm mm kg  
500 467,4 610 308 2500 2102 1376 125,693 45°
Photo
Photo Chemkor Pressure pipelines Blind flange, PVC-U, d - 80 [Code number: 2180000]
Chemkor Pressure pipelines Blind flange, PVC-U, d - 80 [Code number: 2180000]
Details 		2180000 1 249 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

Material: PVC-U.

Diameter: 80 mm.

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo
Photo Chemkor Pressure pipelines Blind flange, PVC-U, d - 100 [Code number: 2180001]
Chemkor Pressure pipelines Blind flange, PVC-U, d - 100 [Code number: 2180001]
Details 		2180001 1 615 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

Material: PVC-U.

Diameter: 100 mm.

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo
Photo Chemkor Pressure pipelines Blind flange, PVC-U, d - 150 [Code number: 2180002]
Chemkor Pressure pipelines Blind flange, PVC-U, d - 150 [Code number: 2180002]
Details 		2180002 3 398 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

Material: PVC-U.

Diameter: 150 mm.

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo
Photo Chemkor Pressure pipelines Blind flange, PVC-U, d - 200 [Code number: 2180003]
Chemkor Pressure pipelines Blind flange, PVC-U, d - 200 [Code number: 2180003]
Details 		2180003 5 276 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

Material: PVC-U.

Diameter: 200 mm.

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo
Photo Chemkor Pressure pipelines Blind flange, PVC-U, d - 300 [Code number: 2180004]
Chemkor Pressure pipelines Blind flange, PVC-U, d - 300 [Code number: 2180004]
Details 		2180004 19 224 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

Material: PVC-U.

Diameter: 300 mm.

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo Chemkor Pressure pipelines Bend 45° with sockets, d - 110, uPVC, SDR 26, 1,0 MPa [Code number: 2180007] Draft Chemkor Pressure pipelines Bend 45° with sockets, d - 110, uPVC, SDR 26, 1,0 MPa [Code number: 2180007]
Chemkor Pressure pipelines Bend 45° with sockets, d - 110, uPVC, SDR 26, 1,0 MPa [Code number: 2180007]
Details 		2180007 2 366 rub
Photo Draft
Photo Chemkor Pressure pipelines Bend 90° with sockets, d - 110, uPVC, SDR 26, 1,0 MPa [Code number: 2180008] Draft Chemkor Pressure pipelines Bend 90° with sockets, d - 110, uPVC, SDR 26, 1,0 MPa [Code number: 2180008]
Chemkor Pressure pipelines Bend 90° with sockets, d - 110, uPVC, SDR 26, 1,0 MPa [Code number: 2180008]
Details 		2180008 2 587 rub
Photo Draft
Photo Chemkor Pressure pipelines Bend 45° with sockets, d - 160, uPVC, SDR 26, 1,0 MPa [Code number: 2180009] Draft Chemkor Pressure pipelines Bend 45° with sockets, d - 160, uPVC, SDR 26, 1,0 MPa [Code number: 2180009]
Chemkor Pressure pipelines Bend 45° with sockets, d - 160, uPVC, SDR 26, 1,0 MPa [Code number: 2180009]
Details 		2180009 4 931 rub
Photo Draft
Photo Chemkor Pressure pipelines Bend 90° with sockets, d - 160, uPVC, SDR 26, 1,0 MPa [Code number: 2180010] Draft Chemkor Pressure pipelines Bend 90° with sockets, d - 160, uPVC, SDR 26, 1,0 MPa [Code number: 2180010]
Chemkor Pressure pipelines Bend 90° with sockets, d - 160, uPVC, SDR 26, 1,0 MPa [Code number: 2180010]
Details 		2180010 5 838 rub
Photo Draft
Photo Chemkor Pressure pipelines Reducer, with sockets, d - 160, d1 - 110, uPVC, SDR 26, 1,0 MPa [Code number: 2180011] Draft Chemkor Pressure pipelines Reducer, with sockets, d - 160, d1 - 110, uPVC, SDR 26, 1,0 MPa [Code number: 2180011]
Chemkor Pressure pipelines Reducer, with sockets, d - 160, d1 - 110, uPVC, SDR 26, 1,0 MPa [Code number: 2180011]
Details 		2180011 3 745 rub
Photo Draft
Photo Chemkor Pressure pipelines T-piece 45° with socket, d - 110, d1 - 110, uPVC, SDR 26, 1,0 MPa [Code number: 2180012] Draft Chemkor Pressure pipelines T-piece 45° with socket, d - 110, d1 - 110, uPVC, SDR 26, 1,0 MPa [Code number: 2180012]
Chemkor Pressure pipelines T-piece 45° with socket, d - 110, d1 - 110, uPVC, SDR 26, 1,0 MPa [Code number: 2180012]
Details 		2180012 9 086 rub
Photo Draft
Photo Chemkor Pressure pipelines T-piece 45° with socket, d - 160, d1 - 160, uPVC, SDR 26, 1,0 MPa [Code number: 2180013] Draft Chemkor Pressure pipelines T-piece 45° with socket, d - 160, d1 - 160, uPVC, SDR 26, 1,0 MPa [Code number: 2180013]
Chemkor Pressure pipelines T-piece 45° with socket, d - 160, d1 - 160, uPVC, SDR 26, 1,0 MPa [Code number: 2180013]
Details 		2180013 20 252 rub
Photo Draft
Photo Chemkor Pressure pipelines T-piece 90° with socket, d - 110, d - 110, uPVC, SDR 26, 1,0 MPa [Code number: 2180014] Draft Chemkor Pressure pipelines T-piece 90° with socket, d - 110, d - 110, uPVC, SDR 26, 1,0 MPa [Code number: 2180014]
Chemkor Pressure pipelines T-piece 90° with socket, d - 110, d - 110, uPVC, SDR 26, 1,0 MPa [Code number: 2180014]
Details 		2180014 4 505 rub
Photo Draft
Photo Chemkor Pressure pipelines T-piece 90° with socket, d - 160, d1 - 110, uPVC, SDR 26, 1,0 MPa [Code number: 2180015] Draft Chemkor Pressure pipelines T-piece 90° with socket, d - 160, d1 - 110, uPVC, SDR 26, 1,0 MPa [Code number: 2180015]
Chemkor Pressure pipelines T-piece 90° with socket, d - 160, d1 - 110, uPVC, SDR 26, 1,0 MPa [Code number: 2180015]
Details 		2180015 8 176 rub
Photo Draft
Photo Chemkor Pressure Pipes Tee, d - 315, d1 - 300, PVC-U, SDR 26, 1.0 MPa, with uPVC flange [Article: 2180018] Draft Chemkor Pressure Pipes Tee, d - 315, d1 - 300, PVC-U, SDR 26, 1.0 MPa, with uPVC flange [Article: 2180018]
Chemkor Pressure Pipes Tee, d - 315, d1 - 300, PVC-U, SDR 26, 1.0 MPa, with uPVC flange [Article: 2180018]
Details 		2180018 59 990 rub
Photo
Photo Chemkor Pressure pipelines Flange adapter, uPVC, with metal flange, FW 400 [Code number: 2180155]
Chemkor Pressure pipelines Flange adapter, uPVC, with metal flange, FW 400 [Code number: 2180155]
Details 		2180155 37 002 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Flange socket connection;
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

The working pressure is 1,0 MPa.

Size: FW 400.

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo
Photo Chemkor Pressure pipelines Flange adapter, uPVC, with metal flange, FW 500 [Code number: 2180156]
Chemkor Pressure pipelines Flange adapter, uPVC, with metal flange, FW 500 [Code number: 2180156]
Details 		2180156 56 833 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Flange socket connection;
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

The working pressure is 1,0 MPa.

Size: FW 500.

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
© Inrusstrade.ru 1999-2025. "Inrusstrade" Ltd. Copying and quoting is prohibited