Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Leninsky urban district

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Наименование Article Цена
Photo Draft
Photo (ARTICLE REPLACED BY 2180007) - Chemkor Pressure pipelines Bend 45° double socket uPVC, SDR 26, 1,0 MPa, d - 110 [Code number: 2181076] Draft (ARTICLE REPLACED BY 2180007) - Chemkor Pressure pipelines Bend 45° double socket uPVC, SDR 26, 1,0 MPa, d - 110 [Code number: 2181076]
(ARTICLE REPLACED BY 2180007) - Chemkor Pressure pipelines Bend 45° double socket uPVC, SDR 26, 1,0 MPa, d - 110 [Code number: 2181076]
Details 		2181076 2 110 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn Angle D L
mm mm mm
110 60° 125,7 152

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo (ARTICLE REPLACED BY 2180008) - Chemkor Pressure pipelines Bend 90° double socket uPVC, SDR 26, 1,0 MPa, d - 110 [Code number: 2181077] Draft (ARTICLE REPLACED BY 2180008) - Chemkor Pressure pipelines Bend 90° double socket uPVC, SDR 26, 1,0 MPa, d - 110 [Code number: 2181077]
(ARTICLE REPLACED BY 2180008) - Chemkor Pressure pipelines Bend 90° double socket uPVC, SDR 26, 1,0 MPa, d - 110 [Code number: 2181077]
Details 		2181077 2 307 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn Angle D L
mm mm mm
110 90° 125,7 152

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo (ARTICLE REPLACED BY 2180009) - Chemkor Pressure pipelines Bend 45° double socket uPVC, SDR 26, 1,0 MPa, d - 160 [Code number: 2181078] Draft (ARTICLE REPLACED BY 2180009) - Chemkor Pressure pipelines Bend 45° double socket uPVC, SDR 26, 1,0 MPa, d - 160 [Code number: 2181078]
(ARTICLE REPLACED BY 2180009) - Chemkor Pressure pipelines Bend 45° double socket uPVC, SDR 26, 1,0 MPa, d - 160 [Code number: 2181078]
Details 		2181078 4 397 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn Angle D L
mm mm mm
160 45° 181,5 183,5

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo (ARTICLE IS REPLACED WITH 2180010) - Chemkor Pressure pipelines Bend 90° double socket uPVC, SDR 26, 1,0 MPa, d - 160 [Code number: 2181079] Draft (ARTICLE IS REPLACED WITH 2180010) - Chemkor Pressure pipelines Bend 90° double socket uPVC, SDR 26, 1,0 MPa, d - 160 [Code number: 2181079]
(ARTICLE IS REPLACED WITH 2180010) - Chemkor Pressure pipelines Bend 90° double socket uPVC, SDR 26, 1,0 MPa, d - 160 [Code number: 2181079]
Details 		2181079 5 212 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn Angle D L
mm mm mm
160 90° 181,5 236,5

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with PVC flange, d - 110, d1 - 100 [Code number: 2181087] Draft Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with PVC flange, d - 110, d1 - 100 [Code number: 2181087]
Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with PVC flange, d - 110, d1 - 100 [Code number: 2181087]
Details 		2181087 1 670 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Connection with PVC flange;
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn D L
mm mm mm
110 100 167

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with uPVC flange, d - 160, d1 - 150 [Code number: 2181088] Draft Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with uPVC flange, d - 160, d1 - 150 [Code number: 2181088]
Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with uPVC flange, d - 160, d1 - 150 [Code number: 2181088]
Details 		2181088 2 625 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Connection with PVC flange;
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn D L
mm mm mm
160 150 196

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with uPVC flange, d - 225, d1 - 200 [Code number: 2181089] Draft Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with uPVC flange, d - 225, d1 - 200 [Code number: 2181089]
Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with uPVC flange, d - 225, d1 - 200 [Code number: 2181089]
Details 		2181089 8 400 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Connection with PVC flange;
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn D L
mm mm mm
225 200 226,5

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with uPVC flange, d - 315, d1 - 300 [Code number: 2181090] Draft Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with uPVC flange, d - 315, d1 - 300 [Code number: 2181090]
Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with uPVC flange, d - 315, d1 - 300 [Code number: 2181090]
Details 		2181090 11 419 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Connection with PVC flange;
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn D L
mm mm mm
315 300 297,5

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with uPVC flange, d - 400, d1 - 400 [Code number: 2181091] Draft Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with uPVC flange, d - 400, d1 - 400 [Code number: 2181091]
Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with uPVC flange, d - 400, d1 - 400 [Code number: 2181091]
Details 		2181091 15 177 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Connection with PVC flange;
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn D L
mm mm mm
400 400 303

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with metal flange, d - 110, d1 - 100 [Code number: 2181092] Draft Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with metal flange, d - 110, d1 - 100 [Code number: 2181092]
Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with metal flange, d - 110, d1 - 100 [Code number: 2181092]
Details 		2181092 6 287 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Flange socket connection;
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn D L
mm mm mm
110 100 153

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with metal flange, d - 160, d1 - 150 [Code number: 2181093] Draft Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with metal flange, d - 160, d1 - 150 [Code number: 2181093]
Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with metal flange, d - 160, d1 - 150 [Code number: 2181093]
Details 		2181093 10 344 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Flange socket connection;
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn D L
mm mm mm
160 150 176

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with metal flange, d - 225, d1 - 200 [Code number: 2181094] Draft Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with metal flange, d - 225, d1 - 200 [Code number: 2181094]
Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with metal flange, d - 225, d1 - 200 [Code number: 2181094]
Details 		2181094 19 106 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Flange socket connection;
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn D L
mm mm mm
225 200 218

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with metal flange, d - 315, d1 - 300 [Code number: 2181095] Draft Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with metal flange, d - 315, d1 - 300 [Code number: 2181095]
Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with metal flange, d - 315, d1 - 300 [Code number: 2181095]
Details 		2181095 27 827 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Flange socket connection;
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn D L
mm mm mm
315 300 252

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with metal flange, d - 90, d1 - 80 [Code number: 2181096] Draft Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with metal flange, d - 90, d1 - 80 [Code number: 2181096]
Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with metal flange, d - 90, d1 - 80 [Code number: 2181096]
Details 		2181096 6 044 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Flange socket connection;
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn D L
mm mm mm
90 80 142

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with metal flange, UR-Cast 400 [Code number: 2181097] Draft Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with metal flange, UR-Cast 400 [Code number: 2181097]
Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with metal flange, UR-Cast 400 [Code number: 2181097]
Details 		2181097 78 643 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

The working pressure is 1,0 MPa.

Technical characteristics

Dn D L1 L Weight
mm mm mm mm kg
400 450 265 320 46

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with metal flange, UR-Cast 500 [Code number: 2181098] Draft Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with metal flange, UR-Cast 500 [Code number: 2181098]
Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with metal flange, UR-Cast 500 [Code number: 2181098]
Details 		2181098 93 804 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

The working pressure is 1,0 MPa.

Technical characteristics

Dn D L1 L Weight
mm mm mm mm kg
500 500 285 340 89

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo Chemkor Pressure pipelines Reducer, double socket, uPVC, SDR 26, 1,0 MPa, d - 110, d1 - 90 [Code number: 2181099] Draft Chemkor Pressure pipelines Reducer, double socket, uPVC, SDR 26, 1,0 MPa, d - 110, d1 - 90 [Code number: 2181099]
Chemkor Pressure pipelines Reducer, double socket, uPVC, SDR 26, 1,0 MPa, d - 110, d1 - 90 [Code number: 2181099]
Details 		2181099 1 344 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)
  • For connecting pipes with different diameters

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn D L
mm mm mm
110 90 255

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo RTP BETA ORANGE T-piece 45°, PP-B, for outdoor sewage, with socket, d - 200, d1 - 160 [Code number: 21810 (RTP)] Draft RTP BETA ORANGE T-piece 45°, PP-B, for outdoor sewage, with socket, d - 200, d1 - 160 [Code number: 21810 (RTP)]
RTP BETA ORANGE T-piece 45°, PP-B, for outdoor sewage, with socket, d - 200, d1 - 160 [Code number: 21810 (RTP)]
Details 		21810 (RTP) 3 291 rub
Photo Draft
Photo (ARTICLE IS REPLACED WITH 2180011) - Chemkor Pressure pipelines Reducer, double socket, uPVC, SDR 26, 1,0 MPa, d - 160, d1 - 110 [Code number: 2181100] Draft (ARTICLE IS REPLACED WITH 2180011) - Chemkor Pressure pipelines Reducer, double socket, uPVC, SDR 26, 1,0 MPa, d - 160, d1 - 110 [Code number: 2181100]
(ARTICLE IS REPLACED WITH 2180011) - Chemkor Pressure pipelines Reducer, double socket, uPVC, SDR 26, 1,0 MPa, d - 160, d1 - 110 [Code number: 2181100]
Details 		2181100 3 291 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)
  • For connecting pipes with different diameters

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn D L
mm mm mm
160 110 305

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
Photo Draft
Photo Chemkor Pressure pipelines Reducer, double socket, uPVC, SDR 26, 1,0 MPa, d - 225, d1 - 110 [Code number: 2181101] Draft Chemkor Pressure pipelines Reducer, double socket, uPVC, SDR 26, 1,0 MPa, d - 225, d1 - 110 [Code number: 2181101]
Chemkor Pressure pipelines Reducer, double socket, uPVC, SDR 26, 1,0 MPa, d - 225, d1 - 110 [Code number: 2181101]
Details 		2181101 4 210 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)
  • For connecting pipes with different diameters

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn D L
mm mm mm
225 110 362

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design
© Inrusstrade.ru 1999-2026. "Inrusstrade" Ltd. Copying and quoting is prohibited

Privacy policy