Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Leninsky urban district

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Наименование Article Цена
Photo Draft
Photo Hutterer & Lechner waste and overflow assembly with integrated water feed 3/4', ball-joint tub-trap, visual parts white [Code number: HL 560N.3] Draft Hutterer & Lechner waste and overflow assembly with integrated water feed 3/4', ball-joint tub-trap, visual parts white [Code number: HL 560N.3]
Hutterer & Lechner waste and overflow assembly with integrated water feed 3/4', ball-joint tub-trap, visual parts white [Code number: HL 560N.3]
Details 		HL 560N.3 43 301 rub

Application area:

  • For bath

Characteristics:

  • Material: PP (visible parts are made of brass and painted white)
  • Size: DN40/50
  • Has a ball joint
  • Equipped with Bowden cable (length: 60 cm)
  • Inlet type: horizontal (outlet 280° turn, 10° tilt)
  • There is a fitting that allows you to connect a drain tube

Capacity: 0.67 l/s.

Product weight: 2.34 kg.

Documentation

Download example of product installation:  Waste and overflow assembly HL 560N.3

Photo Draft
Photo Hutterer & Lechner FlexBox - flat shower trap [Code number: HL 570] Draft Hutterer & Lechner FlexBox - flat shower trap [Code number: HL 570]
Hutterer & Lechner FlexBox - flat shower trap [Code number: HL 570]
Details 		HL 570 23 664 rub

HL 570 - trap for flat shower tray with diameter 90 mm. Equipped with cover size d 113 mm. Horizontal outlet.

Diameter Capacity Load Weight
DN, mm l/s kg kg
40/50 300 0.50 1.607
 
Material of spare parts
Grate Trap cartridge Compression flange Body
       
stainless steel polypropylene thermoplastic elastomer polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
300 300 240 1,607 0,021600000

Documentation

Download data sheet: Flat shower trap HL 570

Download example of product installation:  Flat shower trap HL 570

Photo Draft
Photo SINICON Standard Bend 15°, d - 32, PP [Code number: Kolano 32/15] Draft SINICON Standard Bend 15°, d - 32, PP [Code number: Kolano 32/15]
SINICON Standard Bend 15°, d - 32, PP [Code number: Kolano 32/15]
Details 		Kolano 32/15 161 rub
Photo Draft
Photo SINICON Standard Bend 30°, d - 32, PP (Aquer) [Code number: Kolano 32/30] Draft SINICON Standard Bend 30°, d - 32, PP (Aquer) [Code number: Kolano 32/30]
SINICON Standard Bend 30°, d - 32, PP (Aquer) [Code number: Kolano 32/30]
Details 		Kolano 32/30 161 rub
Photo
Photo SINIKON Standart Bend universal, PP, gray, d - 50 [Code number: KU.050.G] Photo SINIKON Standart Bend universal, PP, gray, d - 50 [Code number: KU.050.G]
1 2
SINIKON Standart Bend universal, PP, gray, d - 50 [Code number: KU.050.G]
Details 		KU.050.G 210 rub

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Colour
mm  
50 Gray
Photo
Photo SINIKON Standart Bend universal, PP, gray, d - 110 [Code number: KU.110.G] Photo SINIKON Standart Bend universal, PP, gray, d - 110 [Code number: KU.110.G]
1 2
SINIKON Standart Bend universal, PP, gray, d - 110 [Code number: KU.110.G]
Details 		KU.110.G 515 rub

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Colour
mm  
110 Gray
Photo Draft
Photo SINIKON Standart Bend 45° for WC, PP, white seal, d - 110 [Code number: PU.110045.W.R] Draft SINIKON Standart Bend 45° for WC, PP, white seal, d - 110 [Code number: PU.110045.W.R]
SINIKON Standart Bend 45° for WC, PP, white seal, d - 110 [Code number: PU.110045.W.R]
Details 		PU.110045.W.R 414 rub

Application purposes:

  • For WC
  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Weight Colour of seal
mm   kg  
110 45° 0,259 white
Photo Draft
Photo SINIKON Standart Bend 90° for WC, PP, white seal, d - 110 [Code number: PU.110090.W.R] Draft SINIKON Standart Bend 90° for WC, PP, white seal, d - 110 [Code number: PU.110090.W.R]
SINIKON Standart Bend 90° for WC, PP, white seal, d - 110 [Code number: PU.110090.W.R]
Details 		PU.110090.W.R 532 rub

Application purposes:

  • For WC
  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Weight Colour of seal
mm   kg  
110 90° 0,332 white
Photo Draft
Photo SINIKON Standart Rubber reduction, white, d - 32*25 [Code number: RG.32.25] Draft SINIKON Standart Rubber reduction, white, d - 32*25 [Code number: RG.32.25]
SINIKON Standart Rubber reduction, white, d - 32*25 [Code number: RG.32.25]
Details 		RG.32.25 83 rub

Application purposes:

  • For domestic drainage system

Material: rubber

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2
mm mm
32 25
Photo Draft
Photo SINIKON Standart Rubber reduction, white, d - 40*25 [Code number: RG.40.25] Draft SINIKON Standart Rubber reduction, white, d - 40*25 [Code number: RG.40.25]
SINIKON Standart Rubber reduction, white, d - 40*25 [Code number: RG.40.25]
Details 		RG.40.25 99 rub

Application purposes:

  • For domestic drainage system

Material: rubber

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2
mm mm
40 25
Photo Draft
Photo SINIKON Standart Rubber reduction, white, d - 40*32 [Code number: RG.40.32] Draft SINIKON Standart Rubber reduction, white, d - 40*32 [Code number: RG.40.32]
SINIKON Standart Rubber reduction, white, d - 40*32 [Code number: RG.40.32]
Details 		RG.40.32 99 rub

Application purposes:

  • For domestic drainage system

Material: rubber

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2
mm mm
40 32
Photo Draft
Photo SINIKON Standart Reducer, rubber, d - 50*25 [Code number: RG.50.25] Draft SINIKON Standart Reducer, rubber, d - 50*25 [Code number: RG.50.25]
SINIKON Standart Reducer, rubber, d - 50*25 [Code number: RG.50.25]
Details 		RG.50.25 107 rub

Application purposes:

  • For domestic drainage system

Material: rubber

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2
mm mm
50 25
Photo Draft
Photo SINIKON Standart Reducer, rubber, d - 50*32 [Code number: RG.50.32] Draft SINIKON Standart Reducer, rubber, d - 50*32 [Code number: RG.50.32]
SINIKON Standart Reducer, rubber, d - 50*32 [Code number: RG.50.32]
Details 		RG.50.32 107 rub

Application purposes:

  • For domestic drainage system

Material: rubber

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2
mm mm
50 32
Photo Draft
Photo SINIKON Standart Rubber reduction, white, d - 50*40 [Code number: RG.50.40] Draft SINIKON Standart Rubber reduction, white, d - 50*40 [Code number: RG.50.40]
SINIKON Standart Rubber reduction, white, d - 50*40 [Code number: RG.50.40]
Details 		RG.50.40 107 rub

Application purposes:

  • For domestic drainage system

Material: rubber

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2
mm mm
50 40
Photo Draft
Photo SINIKON Standart Rubber reduction, white, d - 56*32 (price on request) [Code number: RG.56.32] Draft SINIKON Standart Rubber reduction, white, d - 56*32 (price on request) [Code number: RG.56.32]
SINIKON Standart Rubber reduction, white, d - 56*32 (price on request) [Code number: RG.56.32]
Details 		RG.56.32

Application purposes:

  • For domestic drainage system

Material: rubber

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2
mm mm
56 32
Photo Draft
Photo SINIKON Standart Rubber reduction, white, d - 56*40 (price on request) [Code number: RG.56.40] Draft SINIKON Standart Rubber reduction, white, d - 56*40 (price on request) [Code number: RG.56.40]
SINIKON Standart Rubber reduction, white, d - 56*40 (price on request) [Code number: RG.56.40]
Details 		RG.56.40

Application purposes:

  • For domestic drainage system

Material: rubber

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2
mm mm
56 40
Photo Draft
Photo SINIKON Standart Eccentric reducer 90°, corner, PP, white, d - 50*32 [Code number: RP.P.050.032] Draft SINIKON Standart Eccentric reducer 90°, corner, PP, white, d - 50*32 [Code number: RP.P.050.032]
SINIKON Standart Eccentric reducer 90°, corner, PP, white, d - 50*32 [Code number: RP.P.050.032]
Details 		RP.P.050.032 109 rub

Application purposes:

  • For domestic drainage system
  • For connecting pipes with different diameters

Material: Polypropylene (PP)

Warranty: 20 years

Type: angular.

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2 Colour
mm mm  
50 32 White/Gray
Photo Draft
Photo Wavin PVC Pressure Pipe systems T-piece flared, d - 63*63*63 [Code number: RRS010063 / 20134009] Draft Wavin PVC Pressure Pipe systems T-piece flared, d - 63*63*63 [Code number: RRS010063 / 20134009]
Wavin PVC Pressure Pipe systems T-piece flared, d - 63*63*63 [Code number: RRS010063 / 20134009]
Details 		RRS010063

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin T-piece flared can be used for installation of pressure piping systems. It is used to combine two branches of the pipeline into one flow. You can see the appearance of T-piece flared and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

D1 D3 B1 Z1 B3 Z3
mm mm mm mm mm mm
63-63-63 - 96 41 - -
Photo Draft
Photo Wavin PVC Pressure Pipe systems T-piece flared, d - 75*63*75 [Code number: RRS010074 / 20137009] Draft Wavin PVC Pressure Pipe systems T-piece flared, d - 75*63*75 [Code number: RRS010074 / 20137009]
Wavin PVC Pressure Pipe systems T-piece flared, d - 75*63*75 [Code number: RRS010074 / 20137009]
Details 		RRS010074

ATTENTION! This product is temporarily unavailable for order!

D1 D3 B1 Z1 B3 Z3
mm mm mm mm mm mm
75-63-75 63 102 48 96 48
Photo Draft
Photo Wavin PVC Pressure Pipe systems T-piece flared, d - 75*75*75 [Code number: RRS010075 / 20137019] Draft Wavin PVC Pressure Pipe systems T-piece flared, d - 75*75*75 [Code number: RRS010075 / 20137019]
Wavin PVC Pressure Pipe systems T-piece flared, d - 75*75*75 [Code number: RRS010075 / 20137019]
Details 		RRS010075

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin T-piece flared can be used for installation of pressure piping systems. It is used to combine two branches of the pipeline into one flow. You can see the appearance of T-piece flared and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

D1 D3 B1 Z1 B3 Z3
mm mm mm mm mm mm
75-75-75 - 102 48 - -
© Inrusstrade.ru 1999-2026. "Inrusstrade" Ltd. Copying and quoting is prohibited

Privacy policy