Logo
Ru| En

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Name Article Price
Photo Draft
Photo Wavin PVC Pressure Pipe systems Bend 45°, PVC-U, PN16, d - 90 [Code number: 20140116] Draft Wavin PVC Pressure Pipe systems Bend 45°, PVC-U, PN16, d - 90 [Code number: 20140116]
Wavin PVC Pressure Pipe systems Bend 45°, PVC-U, PN16, d - 90 [Code number: 20140116]
Details 		20140116

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 16 bar. It is used for changing the direction of the pipeline by 45°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

PN d Z B
bar mm mm mm
16 90 63 58
Photo Draft
Photo Hutterer & Lechner Extension element to adjust HL530 shower block, 300x256x115mm [Code number: HL 530V-30] Draft Hutterer & Lechner Extension element to adjust HL530 shower block, 300x256x115mm [Code number: HL 530V-30]
Hutterer & Lechner Extension element to adjust HL530 shower block, 300x256x115mm [Code number: HL 530V-30]
Details 		HL 530V-30 7 432 rub

The HL Company produces special extension element for shower block HL 530.0. Extension element HL 530V-30 has a waterproof coating, and it can increase shower block to 300 mm. Extension element is made of EPS, and it weighs a little - just 500 grams.

Size Material Weight
mm   gr
300 х 256 х 115 EPS 500
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
128 1204 264 1 0,040685568
Photo Draft
Photo Wavin PVC Pressure Pipe systems Bend 30°, PVC-U, PN10, d - 63 [Code number: 20134117] Draft Wavin PVC Pressure Pipe systems Bend 30°, PVC-U, PN10, d - 63 [Code number: 20134117]
Wavin PVC Pressure Pipe systems Bend 30°, PVC-U, PN10, d - 63 [Code number: 20134117]
Details 		20134117

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 10 bar. It is used for changing the direction of the pipeline by 30°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

PN d Z B
bar mm mm mm
10 63 48 43
Photo Draft
Photo Wavin PVC Pressure Pipe systems Double Y-branch fitting, PVC-U, PN16, d - 63 [Code number: 20134313] Draft Wavin PVC Pressure Pipe systems Double Y-branch fitting, PVC-U, PN16, d - 63 [Code number: 20134313]
Wavin PVC Pressure Pipe systems Double Y-branch fitting, PVC-U, PN16, d - 63 [Code number: 20134313]
Details 		20134313

ATTENTION! This product is temporarily unavailable for order!

d Z1 Z2 B Type PN
mm mm mm mm   bar
63 15 37 38 А 16
Photo Draft
Photo Hutterer & Lechner Extension element to adjust HL530 shower block, 600x256x115mm [Code number: HL 530V-60] Draft Hutterer & Lechner Extension element to adjust HL530 shower block, 600x256x115mm [Code number: HL 530V-60]
Hutterer & Lechner Extension element to adjust HL530 shower block, 600x256x115mm [Code number: HL 530V-60]
Details 		HL 530V-60 12 671 rub

The HL Company produces special extension element for shower block HL 530.0. Extension element HL 530V-60 has a waterproof coating, and it can increase shower block to 600 mm. Extension element is made of EPS, and it weighs a little - just 1010 grams.

Size Material Weight
mm   gr
600 x 256 x 115 EPS 1010
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
128 1204 264 1,513 0,040685568
Photo Draft
Photo Wavin PVC Pressure Pipe systems Double Y-branch fitting, PVC-U, PN10, d - 63 [Code number: 20134314] Draft Wavin PVC Pressure Pipe systems Double Y-branch fitting, PVC-U, PN10, d - 63 [Code number: 20134314]
Wavin PVC Pressure Pipe systems Double Y-branch fitting, PVC-U, PN10, d - 63 [Code number: 20134314]
Details 		20134314

ATTENTION! This product is temporarily unavailable for order!

d Z1 Z2 B Type PN
mm mm mm mm   bar
63 -3 77 38 В 10
Photo Draft
Photo Wavin PVC Pressure Pipe systems Bend 30°, PVC-U, PN10, d - 90 [Code number: 20140117] Draft Wavin PVC Pressure Pipe systems Bend 30°, PVC-U, PN10, d - 90 [Code number: 20140117]
Wavin PVC Pressure Pipe systems Bend 30°, PVC-U, PN10, d - 90 [Code number: 20140117]
Details 		20140117

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 10 bar. It is used for changing the direction of the pipeline by 30°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

PN d Z B
bar mm mm mm
10 90 65 58
Photo Draft
Photo Hutterer & Lechner Elongation element for HL531, L = 600 mm [Code number: HL 531V-60] Draft Hutterer & Lechner Elongation element for HL531, L = 600 mm [Code number: HL 531V-60]
Hutterer & Lechner Elongation element for HL531, L = 600 mm [Code number: HL 531V-60]
Details 		HL 531V-60 12 415 rub

Application area:

  • For barriere-free showers

Characteristics:

  • Material: EPS-40
  • Dimension: 600 x 200 x 79 mm

Weight: 0,557 kg

 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
98 1204 264 0,793 0,031149888
Photo Draft
Photo Wavin PVC Pressure Pipe systems Double Y-branch fitting, PVC-U, PN10, d - 75 [Code number: 20137313] Draft Wavin PVC Pressure Pipe systems Double Y-branch fitting, PVC-U, PN10, d - 75 [Code number: 20137313]
Wavin PVC Pressure Pipe systems Double Y-branch fitting, PVC-U, PN10, d - 75 [Code number: 20137313]
Details 		20137313

ATTENTION! This product is temporarily unavailable for order!

d Z1 Z2 B Type PN
mm mm mm mm   bar
75 17 43 44 А 10
Photo Draft
Photo Wavin PVC Pressure Pipe systems Bend 30°, PVC-U, PN12,5, d - 110 [Code number: 20146117] Draft Wavin PVC Pressure Pipe systems Bend 30°, PVC-U, PN12,5, d - 110 [Code number: 20146117]
Wavin PVC Pressure Pipe systems Bend 30°, PVC-U, PN12,5, d - 110 [Code number: 20146117]
Details 		20146117

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 12,5 bar. It is used for changing the direction of the pipeline by 30°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

PN d Z B
bar mm mm mm
12,5 110 79 70
Photo Draft
Photo Hutterer & Lechner Basin waste elbow and tube DN40 with waste 1 1/2' [Code number: HL 16.1] Draft Hutterer & Lechner Basin waste elbow and tube DN40 with waste 1 1/2' [Code number: HL 16.1]
Hutterer & Lechner Basin waste elbow and tube DN40 with waste 1 1/2' [Code number: HL 16.1]
Details 		HL 16.1 1 508 rub

Application area:

  • For shower trays

Characteristics:

  • Material: PP
  • Dimension: DN40 x 6/4"

Weight: 0,15 kg

 
PE-bag
Height Width Depth Weight Volume
mm mm mm kg m3
80 80 250 0,158 0,001600000
Photo Draft
Photo Wavin PVC Pressure Pipe systems Bend 30°, PVC-U, PN12,5, d - 160 [Code number: 20156117] Draft Wavin PVC Pressure Pipe systems Bend 30°, PVC-U, PN12,5, d - 160 [Code number: 20156117]
Wavin PVC Pressure Pipe systems Bend 30°, PVC-U, PN12,5, d - 160 [Code number: 20156117]
Details 		20156117

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 12,5 bar. It is used for changing the direction of the pipeline by 30°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

PN d Z B
bar mm mm mm
12,5 160 122 99
Photo Draft
Photo Hutterer & Lechner Visible parts brown for HL530.0 [Code number: HL 0530.B] Draft Hutterer & Lechner Visible parts brown for HL530.0 [Code number: HL 0530.B]
Hutterer & Lechner Visible parts brown for HL530.0 [Code number: HL 0530.B]
Details 		HL 0530.B 5 055 rub

Visible parts HL 0530.B are designed for HL 530.0. The visible parts are painted brown. Size is 150х150 mm, product is made of ABS. Weight is 200 gr.

Size Material Weight
mm   gr
150х150 ABS 200
Photo Draft
Photo Wavin PVC Pressure Pipe systems Bend 30°, PVC-U, PN12,5, d - 200 [Code number: 20160117] Draft Wavin PVC Pressure Pipe systems Bend 30°, PVC-U, PN12,5, d - 200 [Code number: 20160117]
Wavin PVC Pressure Pipe systems Bend 30°, PVC-U, PN12,5, d - 200 [Code number: 20160117]
Details 		20160117

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 12,5 bar. It is used for changing the direction of the pipeline by 30°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

PN d Z B
bar mm mm mm
12,5 200 147 122
Photo
Photo Hutterer & Lechner Visible parts brown with brown glass-tile for HL 530 [Code number: HL 0530.BG]
Hutterer & Lechner Visible parts brown with brown glass-tile for HL 530 [Code number: HL 0530.BG]
Details 		HL 0530.BG 28 734 rub

Visible parts HL 0530.BG are designed for HL 530.0. The visible parts are painted brown and decorated with brown glass-tile. Size is 150х150 mm, product is made of ABS. Weight is 449 gr.

Size Material Weight
mm   gr
150х150 ABS/Glas 449
Photo Draft
Photo Wavin PVC Pressure Pipe systems Bend 30°, PVC-U, PN12,5, d - 225 [Code number: 20162117] Draft Wavin PVC Pressure Pipe systems Bend 30°, PVC-U, PN12,5, d - 225 [Code number: 20162117]
Wavin PVC Pressure Pipe systems Bend 30°, PVC-U, PN12,5, d - 225 [Code number: 20162117]
Details 		20162117

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 12,5 bar. It is used for changing the direction of the pipeline by 30°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

PN d Z B
bar mm mm mm
12,5 225 155 137
Photo Draft
Photo Hutterer & Lechner Visible parts grey for HL530.0 [Code number: HL 0530.G] Draft Hutterer & Lechner Visible parts grey for HL530.0 [Code number: HL 0530.G]
Hutterer & Lechner Visible parts grey for HL530.0 [Code number: HL 0530.G]
Details 		HL 0530.G 5 055 rub

Visible parts HL 0530.G are designed for HL 530.0. The visible parts are painted grey. Size is 150х150 mm, product is made of ABS. Weight is 200 gr.

Size Material Weight
mm   gr
150х150 ABS 200
Photo Draft
Photo Wavin PVC Pressure Pipe systems Bend 30°, PVC-U, PN12,5, d - 250 [Code number: 20164117] Draft Wavin PVC Pressure Pipe systems Bend 30°, PVC-U, PN12,5, d - 250 [Code number: 20164117]
Wavin PVC Pressure Pipe systems Bend 30°, PVC-U, PN12,5, d - 250 [Code number: 20164117]
Details 		20164117

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 12,5 bar. It is used for changing the direction of the pipeline by 30°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

PN d Z B
bar mm mm mm
12,5 250 195 151
Photo
Photo Hutterer & Lechner Visible parts grey with grey glass-tile for HL 530 [Code number: HL 0530.GG]
Hutterer & Lechner Visible parts grey with grey glass-tile for HL 530 [Code number: HL 0530.GG]
Details 		HL 0530.GG 28 734 rub

Visible parts HL 0530.GG are designed for HL 530.0. The visible parts are painted grey and decorated with grey glass-tile. Size is 150х150 mm, product is made of ABS. Weight is 449 gr.

Size Material Weight
mm   gr
150х150 ABS 449
Photo Draft
Photo Wavin PVC Pressure Pipe systems Bend 30°, PVC-U, PN12,5, d - 280 [Code number: 20166117] Draft Wavin PVC Pressure Pipe systems Bend 30°, PVC-U, PN12,5, d - 280 [Code number: 20166117]
Wavin PVC Pressure Pipe systems Bend 30°, PVC-U, PN12,5, d - 280 [Code number: 20166117]
Details 		20166117

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 12,5 bar. It is used for changing the direction of the pipeline by 30°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

PN d Z B
bar mm mm mm
12,5 280 213 168

© Inrusstrade.ru 1999-2024. "Inrusstrade" Ltd. Copying and quoting is prohibited