Logo
Ru| En

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Name Article Price
Photo Draft
Photo [NO LONGER PRODUCED] - Geberit HDPE Clamp connector, d 89 - 90, d1 83 - 84 [Code number: 359.437.00.1] Draft [NO LONGER PRODUCED] - Geberit HDPE Clamp connector, d 89 - 90, d1 83 - 84 [Code number: 359.437.00.1]
[NO LONGER PRODUCED] - Geberit HDPE Clamp connector, d 89 - 90, d1 83 - 84 [Code number: 359.437.00.1]
Details 		359.437.00.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For connecting pipes and fittings made of the same or different product materials

Characteristics:

  • With seal made of EPDM

Scope of delivery:

  • Screws (2 pcs)

Material: Stainless steel

d d1 D H E X
mm mm cm cm cm cm
89 - 90 83 - 84 10,5 5,6 2,6 0,4
Photo Draft
Photo Wavin PVC Pressure Pipe systems Y-branch fitting 45°, PVC-U, PN10, d - 75x75 [Code number: 20137926] Draft Wavin PVC Pressure Pipe systems Y-branch fitting 45°, PVC-U, PN10, d - 75x75 [Code number: 20137926]
Wavin PVC Pressure Pipe systems Y-branch fitting 45°, PVC-U, PN10, d - 75x75 [Code number: 20137926]
Details 		20137926

ATTENTION! This product is temporarily unavailable for order!

d Z1 Z2 В PN
mm mm mm mm bar
75 102 17 44 10
Photo Draft
Photo Wavin PVC Pressure Pipe systems Bend 45°, PVC-U, PN12,5, d - 110 [Code number: 20146115] Draft Wavin PVC Pressure Pipe systems Bend 45°, PVC-U, PN12,5, d - 110 [Code number: 20146115]
Wavin PVC Pressure Pipe systems Bend 45°, PVC-U, PN12,5, d - 110 [Code number: 20146115]
Details 		20146115

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 12,5 bar. It is used for changing the direction of the pipeline by 45°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

PN d Z B
bar mm mm mm
12,5 110 80 70
Photo Draft
Photo Hutterer & Lechner Stainless steel cover 'Design', fitting to gutter length 1500mm [Code number: HL 050D/150] Draft Hutterer & Lechner Stainless steel cover 'Design', fitting to gutter length 1500mm [Code number: HL 050D/150]
Hutterer & Lechner Stainless steel cover 'Design', fitting to gutter length 1500mm [Code number: HL 050D/150]
Details 		HL 050D/150 54 701 rub

HL 050D/150 - it is stainless steel cover "Design", it is length is 1400 mm. Height of the cover is adjustable. You can insert tile on the cover with mastic but mastic layer thickness should not be more than 19 mm. The cover has a welded on plate 3mm. It can endure load up to 300 kg.

Size, mm Material Load Weight
L H   kg gr
1400 5 - 19 stainless steel
matt		 300 2528
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 2,384 0
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 359.436.00.2] - Geberit HDPE Clamp connector, d 75 - 76, d1 89 - 90 [Code number: 359.436.00.1] Draft [NO LONGER PRODUCED. REPLACEMENT: 359.436.00.2] - Geberit HDPE Clamp connector, d 75 - 76, d1 89 - 90 [Code number: 359.436.00.1]
[NO LONGER PRODUCED. REPLACEMENT: 359.436.00.2] - Geberit HDPE Clamp connector, d 75 - 76, d1 89 - 90 [Code number: 359.436.00.1]
Details 		359.436.00.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For connecting pipes and fittings made of the same or different product materials

Characteristics:

  • With seal made of EPDM

Scope of delivery:

  • Screws (2 pcs)

Material: Stainless steel

d d1 D H E X
mm mm cm cm cm cm
75 - 76 89 - 90 10,5 5,6 2,6 0,4
Photo Draft
Photo Wavin PVC Pressure Pipe systems Y-branch fitting 45°, PVC-U, PN10, d - 90x90 [Code number: 20140926] Draft Wavin PVC Pressure Pipe systems Y-branch fitting 45°, PVC-U, PN10, d - 90x90 [Code number: 20140926]
Wavin PVC Pressure Pipe systems Y-branch fitting 45°, PVC-U, PN10, d - 90x90 [Code number: 20140926]
Details 		20140926

ATTENTION! This product is temporarily unavailable for order!

d Z1 Z2 В PN
mm mm mm mm bar
90 121 20 51 10
Photo Draft
Photo Wavin PVC Pressure Pipe systems Bend 45°, PVC-U, PN12,5, d - 160 [Code number: 20156115] Draft Wavin PVC Pressure Pipe systems Bend 45°, PVC-U, PN12,5, d - 160 [Code number: 20156115]
Wavin PVC Pressure Pipe systems Bend 45°, PVC-U, PN12,5, d - 160 [Code number: 20156115]
Details 		20156115

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 12,5 bar. It is used for changing the direction of the pipeline by 45°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

PN d Z B
bar mm mm mm
12,5 160 119 99
Photo Draft
Photo Hutterer & Lechner Stainless steel cover 'Design', fitting to gutter length 1400mm [Code number: HL 050D/140] Draft Hutterer & Lechner Stainless steel cover 'Design', fitting to gutter length 1400mm [Code number: HL 050D/140]
Hutterer & Lechner Stainless steel cover 'Design', fitting to gutter length 1400mm [Code number: HL 050D/140]
Details 		HL 050D/140 49 514 rub

HL 050D/140 - it is stainless steel cover "Design", it is length is 1300 mm. Height of the cover is adjustable. You can insert tile on the cover with mastic but mastic layer thickness should not be more than 19 mm. The cover has a welded on plate 3 mm. It can endure load up to 300 kg.

Size, mm Material Load Weight
L H   kg gr
1300 5 - 19 stainless steel
matt		 300 2322
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 2,21 0
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 359.435.00.2] - Geberit HDPE Clamp connector, d 75 - 76, d1 83 - 84 [Code number: 359.435.00.1] Draft [NO LONGER PRODUCED. REPLACEMENT: 359.435.00.2] - Geberit HDPE Clamp connector, d 75 - 76, d1 83 - 84 [Code number: 359.435.00.1]
[NO LONGER PRODUCED. REPLACEMENT: 359.435.00.2] - Geberit HDPE Clamp connector, d 75 - 76, d1 83 - 84 [Code number: 359.435.00.1]
Details 		359.435.00.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For connecting pipes and fittings made of the same or different product materials

Characteristics:

  • With seal made of EPDM

Scope of delivery:

  • Screws (2 pcs)

Material: Stainless steel

d d1 D H E X
mm mm cm cm cm cm
75 - 76 83 - 84 9,9 5,6 2,6 0,4
Photo Draft
Photo Wavin PVC Pressure Pipe systems Y-branch fitting 45°, PVC-U, PN10, d - 110x110 [Code number: 20146926] Draft Wavin PVC Pressure Pipe systems Y-branch fitting 45°, PVC-U, PN10, d - 110x110 [Code number: 20146926]
Wavin PVC Pressure Pipe systems Y-branch fitting 45°, PVC-U, PN10, d - 110x110 [Code number: 20146926]
Details 		20146926

ATTENTION! This product is temporarily unavailable for order!

d Z1 Z2 В PN
mm mm mm mm bar
110 148 24 61 10
Photo Draft
Photo Wavin PVC Pressure Pipe systems Bend 45°, PVC-U, PN12,5, d - 200 [Code number: 20160115] Draft Wavin PVC Pressure Pipe systems Bend 45°, PVC-U, PN12,5, d - 200 [Code number: 20160115]
Wavin PVC Pressure Pipe systems Bend 45°, PVC-U, PN12,5, d - 200 [Code number: 20160115]
Details 		20160115

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 12,5 bar. It is used for changing the direction of the pipeline by 45°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

PN d Z B
bar mm mm mm
12,5 200 143 122
Photo Draft
Photo Hutterer & Lechner Stainless steel cover 'Design', fitting to gutter length 1300mm [Code number: HL 050D/130] Draft Hutterer & Lechner Stainless steel cover 'Design', fitting to gutter length 1300mm [Code number: HL 050D/130]
Hutterer & Lechner Stainless steel cover 'Design', fitting to gutter length 1300mm [Code number: HL 050D/130]
Details 		HL 050D/130 41 181 rub

HL 050D/130 - it is stainless steel cover "Design", it is length is 1200 mm. Height of the cover is adjustable. You can insert tile on the cover with mastic but mastic layer thickness should not be more than 19 mm. The cover is made of stainless steel. It can endure load up to 300 kg.

Size, mm Material Load Weight
L H   kg gr
1200 5 - 19 stainless steel
matt		 300 2116
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 2,128 0
Photo Draft
Photo Wavin PVC Pressure Pipe systems Y-branch fitting 45°, PVC-U, PN10, d - 125x125 [Code number: 20148926] Draft Wavin PVC Pressure Pipe systems Y-branch fitting 45°, PVC-U, PN10, d - 125x125 [Code number: 20148926]
Wavin PVC Pressure Pipe systems Y-branch fitting 45°, PVC-U, PN10, d - 125x125 [Code number: 20148926]
Details 		20148926

ATTENTION! This product is temporarily unavailable for order!

d Z1 Z2 В PN
mm mm mm mm bar
125 167 30 69 10
Photo Draft
Photo Wavin PVC Pressure Pipe systems Bend 45°, PVC-U, PN12,5, d - 225 [Code number: 20162115] Draft Wavin PVC Pressure Pipe systems Bend 45°, PVC-U, PN12,5, d - 225 [Code number: 20162115]
Wavin PVC Pressure Pipe systems Bend 45°, PVC-U, PN12,5, d - 225 [Code number: 20162115]
Details 		20162115

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 12,5 bar. It is used for changing the direction of the pipeline by 45°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

PN d Z B
bar mm mm mm
12,5 225 166 137
Photo Draft
Photo Hutterer & Lechner Stainless steel cover 'Design', fitting to gutter length 1200mm [Code number: HL 050D/120] Draft Hutterer & Lechner Stainless steel cover 'Design', fitting to gutter length 1200mm [Code number: HL 050D/120]
Hutterer & Lechner Stainless steel cover 'Design', fitting to gutter length 1200mm [Code number: HL 050D/120]
Details 		HL 050D/120 32 554 rub

HL 050D/120 - it is cover "Design" with a welded on plate 3 mm, it is length is 1100 mm. Height of the cover is adjustable 5 - 19 mm. You can glue tile on the cover with mastic but mastic layer thickness should not be more than 19 mm. The cover is made of stainless steel. It can endure load up to 300 kg.

Size, mm Material Load Weight
L H   kg gr
1100 5 - 19 stainless steel
matt		 300 1954
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 1,966 0
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 359.434.00.2] - Geberit HDPE Clamp connector, d 75 - 76, d1 78 [Code number: 359.434.00.1] Draft [NO LONGER PRODUCED. REPLACEMENT: 359.434.00.2] - Geberit HDPE Clamp connector, d 75 - 76, d1 78 [Code number: 359.434.00.1]
[NO LONGER PRODUCED. REPLACEMENT: 359.434.00.2] - Geberit HDPE Clamp connector, d 75 - 76, d1 78 [Code number: 359.434.00.1]
Details 		359.434.00.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For connecting pipes and fittings made of the same or different product materials

Characteristics:

  • With seal made of EPDM

Scope of delivery:

  • Screws (2 pcs)

Material: Stainless steel

d d1 D H E X
mm mm cm cm cm cm
75 - 76 78 9,3 5,6 2,6 0,4
Photo Draft
Photo Wavin PVC Pressure Pipe systems Y-branch fitting 45°, PVC-U, PN10, d - 140x140 [Code number: 20152926] Draft Wavin PVC Pressure Pipe systems Y-branch fitting 45°, PVC-U, PN10, d - 140x140 [Code number: 20152926]
Wavin PVC Pressure Pipe systems Y-branch fitting 45°, PVC-U, PN10, d - 140x140 [Code number: 20152926]
Details 		20152926

ATTENTION! This product is temporarily unavailable for order!

d Z1 Z2 В PN
mm mm mm mm bar
140 190 34 76 10
Photo Draft
Photo Wavin PVC Pressure Pipe systems Bend 45°, PVC-U, PN12,5, d - 250 [Code number: 20164115] Draft Wavin PVC Pressure Pipe systems Bend 45°, PVC-U, PN12,5, d - 250 [Code number: 20164115]
Wavin PVC Pressure Pipe systems Bend 45°, PVC-U, PN12,5, d - 250 [Code number: 20164115]
Details 		20164115

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 12,5 bar. It is used for changing the direction of the pipeline by 45°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

PN d Z B
bar mm mm mm
12,5 250 170 151
Photo Draft
Photo Hutterer & Lechner Stainless steel cover 'Design', fitting to gutter length 1100mm [Code number: HL 050D/110] Draft Hutterer & Lechner Stainless steel cover 'Design', fitting to gutter length 1100mm [Code number: HL 050D/110]
Hutterer & Lechner Stainless steel cover 'Design', fitting to gutter length 1100mm [Code number: HL 050D/110]
Details 		HL 050D/110 31 350 rub

HL 050D/110 - it is cover "Design" with a welded on plate 3mm, it is length is 1000 mm. Height of the cover is adjustable. You can glue tile on the cover with mastic but mastic layer thickness should not be more than 19 mm. The cover is made of stainless steel. It can endure load up to 300 kg.

Size, mm Material Load Weight
L H   kg gr
1000 5 - 19 stainless steel
matt		 300 1757
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 1,767 0
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 359.433.00.2] - Geberit HDPE Clamp connector, d 75 - 76, d1 75 - 76 [Code number: 359.433.00.1] Draft [NO LONGER PRODUCED. REPLACEMENT: 359.433.00.2] - Geberit HDPE Clamp connector, d 75 - 76, d1 75 - 76 [Code number: 359.433.00.1]
[NO LONGER PRODUCED. REPLACEMENT: 359.433.00.2] - Geberit HDPE Clamp connector, d 75 - 76, d1 75 - 76 [Code number: 359.433.00.1]
Details 		359.433.00.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For connecting pipes and fittings made of the same or different product materials

Characteristics:

  • With seal made of EPDM

Scope of delivery:

  • Screws (2 pcs)

Material: Stainless steel

d d1 D H E X
mm mm cm cm cm cm
75 - 76 75 - 76 9,1 5,6 2,6 0,4

© Inrusstrade.ru 1999-2024. "Inrusstrade" Ltd. Copying and quoting is prohibited