Logo
Ru| En

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Name Article Price
Photo Draft
Photo [NO LONGER PRODUCED] - Geberit HDPE Clamp connector, d 135, d1 140 - 141 [Code number: 312.140.00.1] Draft [NO LONGER PRODUCED] - Geberit HDPE Clamp connector, d 135, d1 140 - 141 [Code number: 312.140.00.1]
[NO LONGER PRODUCED] - Geberit HDPE Clamp connector, d 135, d1 140 - 141 [Code number: 312.140.00.1]
Details 		312.140.00.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For connecting pipes and fittings made of the same or different product materials

Characteristics:

  • With seal made of EPDM

Scope of delivery:

  • Screws (2 pcs)

Material: Stainless steel

d d1 D H E X
mm mm cm cm cm cm
135 140 - 141 15,6 6,8 3,2 0,4
Photo Draft
Photo Wavin PVC Pressure Pipe systems T-branch fitting 90° with male thread, PVC-U, PN16, d1 - 75, d2 - 1 1/2" [Code number: 20137818] Draft Wavin PVC Pressure Pipe systems T-branch fitting 90° with male thread, PVC-U, PN16, d1 - 75, d2 - 1 1/2" [Code number: 20137818]
Wavin PVC Pressure Pipe systems T-branch fitting 90° with male thread, PVC-U, PN16, d1 - 75, d2 - 1 1/2" [Code number: 20137818]
Details 		20137818

ATTENTION! This product is temporarily unavailable for order!

d1 d2 В С PN
mm   mm mm bar
75 1 1/2" 44 21 16
Photo Draft
Photo Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN12,5, d - 225 [Code number: 20162105] Draft Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN12,5, d - 225 [Code number: 20162105]
Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN12,5, d - 225 [Code number: 20162105]
Details 		20162105

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 12,5 bar. It is used for changing the direction of the pipeline by 90°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

PN d Z B
bar   mm mm
12,5 225 380 137
Photo Draft
Photo Hutterer & Lechner Cover 'Individual', fitting to gutter length 1500mm [Code number: HL 050I/150] Draft Hutterer & Lechner Cover 'Individual', fitting to gutter length 1500mm [Code number: HL 050I/150]
Hutterer & Lechner Cover 'Individual', fitting to gutter length 1500mm [Code number: HL 050I/150]
Details 		HL 050I/150 52 640 rub

HL 050I/150 - it is stainless steel cover "Individual", it is length is 1400 mm. Height of the cover is adjustable 16 - 30 mm. You can insert tile on the cover with mastic but mastic layer thickness should not be more than 30 mm. It can endure load up to 300 kg.

Size, mm Material Load Weight
L H   kg gr
1400 16 - 30 stainless steel
matt		 300 2151
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 2,163 0
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 359.446.00.2] - Geberit HDPE Clamp connector, d 135, d1 135 [Code number: 359.446.00.1] Draft [NO LONGER PRODUCED. REPLACEMENT: 359.446.00.2] - Geberit HDPE Clamp connector, d 135, d1 135 [Code number: 359.446.00.1]
[NO LONGER PRODUCED. REPLACEMENT: 359.446.00.2] - Geberit HDPE Clamp connector, d 135, d1 135 [Code number: 359.446.00.1]
Details 		359.446.00.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For connecting pipes and fittings made of the same or different product materials

Characteristics:

  • With seal made of EPDM

Scope of delivery:

  • Screws (2 pcs)

Material: Stainless steel

d d1 D H E X
mm mm cm cm cm cm
135 135 15 6,8 3,2 0,4
Photo Draft
Photo Wavin PVC Pressure Pipe systems T-branch fitting 90° with male thread, PVC-U, PN16, d1 - 75, d2 - 2" [Code number: 20137817] Draft Wavin PVC Pressure Pipe systems T-branch fitting 90° with male thread, PVC-U, PN16, d1 - 75, d2 - 2" [Code number: 20137817]
Wavin PVC Pressure Pipe systems T-branch fitting 90° with male thread, PVC-U, PN16, d1 - 75, d2 - 2" [Code number: 20137817]
Details 		20137817

ATTENTION! This product is temporarily unavailable for order!

d1 d2 В С PN
mm   mm mm bar
75 2" 44 26 16
Photo Draft
Photo Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN12,5, d - 250 [Code number: 20164105] Draft Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN12,5, d - 250 [Code number: 20164105]
Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN12,5, d - 250 [Code number: 20164105]
Details 		20164105

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 12,5 bar. It is used for changing the direction of the pipeline by 90°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

PN d Z B
bar   mm mm
12,5 250 390 151
Photo Draft
Photo Hutterer & Lechner Cover 'Individual', fitting to gutter length 1700mm [Code number: HL 050I/170] Draft Hutterer & Lechner Cover 'Individual', fitting to gutter length 1700mm [Code number: HL 050I/170]
Hutterer & Lechner Cover 'Individual', fitting to gutter length 1700mm [Code number: HL 050I/170]
Details 		HL 050I/170 63 095 rub

HL 050I/170 - it is cover "Individual", it is length is 1600 mm. Height of the cover is adjustable. You can glue tile on the cover with mastic but mastic layer thickness should not be more than 30 mm. The cover is made of stainless steel. It can endure load up to 300 kg.

Size, mm Material Load Weight
L H   kg gr
1600 16 - 30 stainless steel
matt		 300 2447
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 2,461 0
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 359.445.00.2] - Geberit HDPE Clamp connector, d 125, d1 140 - 141 [Code number: 359.445.00.1] Draft [NO LONGER PRODUCED. REPLACEMENT: 359.445.00.2] - Geberit HDPE Clamp connector, d 125, d1 140 - 141 [Code number: 359.445.00.1]
[NO LONGER PRODUCED. REPLACEMENT: 359.445.00.2] - Geberit HDPE Clamp connector, d 125, d1 140 - 141 [Code number: 359.445.00.1]
Details 		359.445.00.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For connecting pipes and fittings made of the same or different product materials

Characteristics:

  • With seal made of EPDM

Scope of delivery:

  • Screws (2 pcs)

Material: Stainless steel

d d1 D H E X
mm mm cm cm cm cm
125 140 - 141 15,6 6,8 3,2 0,4
Photo Draft
Photo Wavin PVC Pressure Pipe systems T-branch fitting 90° with female thread, PVC-U, PN10, d1 - 50, d2 - 1 1/2" [Code number: 20126916] Draft Wavin PVC Pressure Pipe systems T-branch fitting 90° with female thread, PVC-U, PN10, d1 - 50, d2 - 1 1/2" [Code number: 20126916]
Wavin PVC Pressure Pipe systems T-branch fitting 90° with female thread, PVC-U, PN10, d1 - 50, d2 - 1 1/2" [Code number: 20126916]
Details 		20126916

ATTENTION! This product is temporarily unavailable for order!

d1 d2 В С Type PN
mm   mm mm   bar
50 1 1/2" 31 22 А 10
Photo Draft
Photo Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN12,5, d - 280 [Code number: 20166105] Draft Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN12,5, d - 280 [Code number: 20166105]
Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN12,5, d - 280 [Code number: 20166105]
Details 		20166105

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 12,5 bar. It is used for changing the direction of the pipeline by 90°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

PN d Z B
bar   mm mm
12,5 280 480 168
Photo Draft
Photo Hutterer & Lechner Cover 'Individual', fitting to gutter length 1800mm [Code number: HL 050I/180] Draft Hutterer & Lechner Cover 'Individual', fitting to gutter length 1800mm [Code number: HL 050I/180]
Hutterer & Lechner Cover 'Individual', fitting to gutter length 1800mm [Code number: HL 050I/180]
Details 		HL 050I/180 68 291 rub

HL 050I/180 - it is cover "Individual" for gutter length 1800 mm, it is length is 1700 mm. Height of the cover is adjustable. You can insert tile on the cover with mastic but mastic layer thickness should not be more than 30 mm. The cover is made of stainless steel. It can endure load up to 300 kg.

Size, mm Material Load Weight
L H   kg gr
1700 16 - 30 stainless steel
matt		 300 2595
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 2,412 0
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 359.444.00.2] - Geberit HDPE Clamp connector, d 125, d1 131 - 135 [Code number: 359.444.00.1] Draft [NO LONGER PRODUCED. REPLACEMENT: 359.444.00.2] - Geberit HDPE Clamp connector, d 125, d1 131 - 135 [Code number: 359.444.00.1]
[NO LONGER PRODUCED. REPLACEMENT: 359.444.00.2] - Geberit HDPE Clamp connector, d 125, d1 131 - 135 [Code number: 359.444.00.1]
Details 		359.444.00.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For connecting pipes and fittings made of the same or different product materials

Characteristics:

  • With seal made of EPDM

Scope of delivery:

  • Screws (2 pcs)

Material: Stainless steel

d d1 D H E X
mm mm cm cm cm cm
125 131 - 135 15 6,8 3,2 0,4
Photo Draft
Photo Wavin PVC Pressure Pipe systems T-branch fitting 90° with female thread, PVC-U, PN10, d1 - 50, d2 - 1 1/2" [Code number: 20126915] Draft Wavin PVC Pressure Pipe systems T-branch fitting 90° with female thread, PVC-U, PN10, d1 - 50, d2 - 1 1/2" [Code number: 20126915]
Wavin PVC Pressure Pipe systems T-branch fitting 90° with female thread, PVC-U, PN10, d1 - 50, d2 - 1 1/2" [Code number: 20126915]
Details 		20126915

ATTENTION! This product is temporarily unavailable for order!

d1 d2 В С Type PN
mm   mm mm   bar
50 1 1/2" 31 22 В 10
Photo Draft
Photo Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN12,5, d - 315 [Code number: 20170105] Draft Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN12,5, d - 315 [Code number: 20170105]
Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN12,5, d - 315 [Code number: 20170105]
Details 		20170105

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 12,5 bar. It is used for changing the direction of the pipeline by 90°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

PN d Z B
bar   mm mm
12,5 315 625 188
Photo Draft
Photo Hutterer & Lechner Cover 'Individual', fitting to gutter length 2100mm [Code number: HL 050I/210] Draft Hutterer & Lechner Cover 'Individual', fitting to gutter length 2100mm [Code number: HL 050I/210]
Hutterer & Lechner Cover 'Individual', fitting to gutter length 2100mm [Code number: HL 050I/210]
Details 		HL 050I/210 84 286 rub

HL 050I/210 - it is cover "Individual", it is length is 2000 mm. Height of the cover is adjustable. You can glue tile on the cover with mastic but mastic layer thickness should not be more than 30 mm. The cover is made of stainless steel. It can endure load up to 300 kg.

Size, mm Material Load Weight
L H   kg gr
2000 16 - 30 stainless steel
matt		 300 3039
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 2,815 0
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 359.443.00.2] - Geberit HDPE Clamp connector, d 125, d1 125 [Code number: 359.443.00.1] Draft [NO LONGER PRODUCED. REPLACEMENT: 359.443.00.2] - Geberit HDPE Clamp connector, d 125, d1 125 [Code number: 359.443.00.1]
[NO LONGER PRODUCED. REPLACEMENT: 359.443.00.2] - Geberit HDPE Clamp connector, d 125, d1 125 [Code number: 359.443.00.1]
Details 		359.443.00.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For connecting pipes and fittings made of the same or different product materials

Characteristics:

  • With seal made of EPDM

Scope of delivery:

  • Screws (2 pcs)

Material: Stainless steel

d d1 D H E X
mm mm cm cm cm cm
125 125 14 6,8 3,2 0,4
Photo Draft
Photo Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN16, d - 50, Z75 [Code number: 20126220] Draft Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN16, d - 50, Z75 [Code number: 20126220]
Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN16, d - 50, Z75 [Code number: 20126220]
Details 		20126220

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 16 bar. It is used for changing the direction of the pipeline by 90°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

PN d Z B
bar   mm mm
16 50 75 31
Photo Draft
Photo Wavin PVC Pressure Pipe systems T-branch fitting 90° with female thread, PVC-U, PN10, d1 - 63, d2 - 2" [Code number: 20134915] Draft Wavin PVC Pressure Pipe systems T-branch fitting 90° with female thread, PVC-U, PN10, d1 - 63, d2 - 2" [Code number: 20134915]
Wavin PVC Pressure Pipe systems T-branch fitting 90° with female thread, PVC-U, PN10, d1 - 63, d2 - 2" [Code number: 20134915]
Details 		20134915

ATTENTION! This product is temporarily unavailable for order!

d1 d2 В С Type PN
mm   mm mm   bar
63 2" 38 29 А 10
Photo Draft
Photo Hutterer & Lechner Cover 'Individual', fitting to gutter length 600mm [Code number: HL 050I/60] Draft Hutterer & Lechner Cover 'Individual', fitting to gutter length 600mm [Code number: HL 050I/60]
Hutterer & Lechner Cover 'Individual', fitting to gutter length 600mm [Code number: HL 050I/60]
Details 		HL 050I/60 24 207 rub

HL 050I/60 - it is stainless steel cover "Individual", it is length is 500 mm. Height of the cover is adjustable. You can glue tile on the cover with mastic but mastic layer thickness should not be more than 30 mm. It can endure load up to 300 kg.

Size, mm Material Load Weight
L H   kg gr
500 16 - 30 stainless steel
matt		 300 766
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 0,776 0

© Inrusstrade.ru 1999-2024. "Inrusstrade" Ltd. Copying and quoting is prohibited