Logo
Ru| En
Loading

Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Name Article Price
Hutterer & Lechner Cover 'Standard', fitting to gutter length 2100mm [Code number: HL 050S/210]
Details
HL 050S/210 34 720 rub

HL 050S/210 - it is cover "Standard", it is length is 2000 mm. Height of the cover is adjustable 2 - 16 mm. You can glue tile on the cover with mastic but mastic layer thickness should not be more than 16 mm. The cover is made of stainless steel. It can endure load up to 300 kg. Weight is 1648 gr.

Size, mm Material Load Weight
L H   kg gr
2000 2 - 16 stainless steel 300 1648
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 1,662 0
Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN10, d - 50 [Code number: 20126105]
Details
20126105

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 10 bar. It is used for changing the direction of the pipeline by 90°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

PN d Z B
bar   mm mm
10 50 92 35
Wavin PVC Pressure Pipe systems Reducing T-branch fitting 90°, PVC-U, PN10, d - 280x225x280 [Code number: 20166929]
Details
20166929

ATTENTION! This product is temporarily unavailable for order!

d1 d2 Z1 Z2 B PN
mm mm mm mm mm bar
280 225 119 148 147 10
Hutterer & Lechner Cover 'Standard', fitting to gutter length 600mm [Code number: HL 050S/60]
Details
HL 050S/60 11 841 rub

HL 050S/60 - it is cover "Standard", it is length is 500 mm. Height of the cover is adjustable. You can glue tile on the cover with mastic but mastic layer thickness should not be more than 16 mm. The cover is made of stainless steel. It can endure load up to 300 kg.

Size, mm Material Load Weight
L H   kg gr
500 2 - 16 stainless steel 300 410
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 0,42 0
Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN16, d - 50 [Code number: 20126106]
Details
20126106

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 16 bar. It is used for changing the direction of the pipeline by 90°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

PN d Z B
bar   mm mm
16 50 92 35
Wavin PVC Pressure Pipe systems Reducing T-branch fitting 90°, PVC-U, PN10, d - 315x160x315 [Code number: 20170919]
Details
20170919

ATTENTION! This product is temporarily unavailable for order!

d1 d2 Z1 Z2 B PN
mm mm mm mm mm bar
315 160 119 197 165 10
Hutterer & Lechner Cover 'Standard', fitting to gutter length 700mm [Code number: HL 050S/70]
Details
HL 050S/70 12 199 rub

HL 050S/70 - it is cover "Standard", it is length is 600 mm. Height of the cover is adjustable. You can insert tile on the cover with mastic but mastic layer thickness should not be more than 16 mm. The cover is made of stainless steel 1.4301. It can endure load up to 300 kg.

Size, mm Material Load Weight
L H   kg gr
600 2 - 16 stainless steel 300 490
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 0,5 0
Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN10, d - 63 [Code number: 20134105]
Details
20134105

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 10 bar. It is used for changing the direction of the pipeline by 90°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

PN d Z B
bar   mm mm
10 63 102 43
Wavin PVC Pressure Pipe systems Reducing T-branch fitting 90°, PVC-U, PN10, d - 315x225x315 [Code number: 20170929]
Details
20170929

ATTENTION! This product is temporarily unavailable for order!

d1 d2 Z1 Z2 B PN
mm mm mm mm mm bar
315 225 119 165 165 10
Hutterer & Lechner Cover 'Standard', fitting to gutter length 800mm [Code number: HL 050S/80]
Details
HL 050S/80 12 563 rub

HL 050S/80 - it is stainless steel cover "Standard", it is length is 700 mm. Height of the cover is adjustable 2 - 16 mm. You can insert tile on the cover with mastic but mastic layer thickness should not be more than 16 mm. It can endure load up to 300 kg.

Size, mm Material Load Weight
L H   kg gr
700 2 - 16 stainless steel 300 583
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 0,593 0
Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN16, d - 63 [Code number: 20134106]
Details
20134106

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 16 bar. It is used for changing the direction of the pipeline by 90°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

PN d Z B
bar   mm mm
16 63 102 43
Wavin PVC Pressure Pipe systems Reducing T-branch fitting 90°, PVC-U, PN6, d - 400x225x400 [Code number: 20176919]
Details
20176919

ATTENTION! This product is temporarily unavailable for order!

d1 d2 Z1 Z2 B PN
mm mm mm mm mm bar
400 225 161 258 208 6
Hutterer & Lechner Cover 'Standard', fitting to gutter length 900mm [Code number: HL 050S/90]
Details
HL 050S/90 12 979 rub

HL 050S/90 - it is cover "Standard", it is length is 800 mm. Height of the cover is adjustable 2 - 16 mm. You can insert tile on the cover with mastic but mastic layer thickness should not be more than 16 mm. The cover is made of stainless steel. It can endure load up to 300 kg.

Size, mm Material Load Weight
L H   kg gr
800 2 - 16 stainless steel 300 672
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 0,682 0
Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN10, d - 75 [Code number: 20137105]
Details
20137105

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 10 bar. It is used for changing the direction of the pipeline by 90°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

PN d Z B
bar   mm mm
10 75 118 51
Wavin PVC Pressure Pipe systems Reducing T-branch fitting 90°, PVC-U, PN6, d - 400x315x400 [Code number: 20176929]
Details
20176929

ATTENTION! This product is temporarily unavailable for order!

d1 d2 Z1 Z2 B PN
mm mm mm mm mm bar
400 315 161 213 208 6
Hutterer & Lechner Cover 'Design', fitting to gutter 800mm [Code number: HL 050D/80]
Details
HL 050D/80 26 608 rub

HL 050D/80 - it is cover "Design", it is length is 700 mm. Height of the cover is adjustable. You can glue tile on the cover with mastic but mastic layer thickness should not be more than 19 mm. The cover has a welded on plate 3mm of satin stainless steel. It can endure load up to 300 kg.

Size, mm Material Load Weight
L H   kg gr
700 5 - 19 stainless steel
matt
300 1260
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 1,27 0
[NO LONGER PRODUCED] - Geberit HDPE Clamp connector, d 274, d1 274 [Code number: 359.452.00.1]
Details
359.452.00.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For connecting pipes and fittings made of the same or different product materials

Characteristics:

  • With seal made of EPDM

Scope of delivery:

  • Screws (2 pcs)

Material: Stainless steel

d d1 D H E X
mm mm cm cm cm cm
274 274 28,9 14 6,8 0,4
Wavin PVC Pressure Pipe systems T-branch fitting 90° with male thread, PVC-U, PN16, d1 - 50, d2 - 1" [Code number: 20126817]
Details
20126817

ATTENTION! This product is temporarily unavailable for order!

d1 d2 В С PN
mm   mm mm bar
50 1" 31 19 16
Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN16, d - 75 [Code number: 20135106]
Details
20135106

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 16 bar. It is used for changing the direction of the pipeline by 90°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

PN d Z B
bar   mm mm
16 75 118 51
Hutterer & Lechner Cover 'Design', fitting to gutter length 900mm [Code number: HL 050D/90]
Details
HL 050D/90 28 109 rub

HL 050D/90 - it is cover "Design", it is length is 800 mm. Height of the cover is adjustable. You can glue tile on the cover with mastic but mastic layer thickness should not be more than 19 mm. The cover has a welded on plate 3mm of satin stainless steel. It can endure load up to 300 kg.

Size, mm Material Load Weight
L H   kg gr
800 5 - 19 stainless steel
matt
300 1395
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 1,405 0