Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Lenin Hills

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Наименование Article Цена
Photo Draft
Photo Wavin PVC Pressure Pipe systems Reducing T-branch fitting 90°, PVC-U, PN16, d - 90x75x90 [Code number: 20140859] Draft Wavin PVC Pressure Pipe systems Reducing T-branch fitting 90°, PVC-U, PN16, d - 90x75x90 [Code number: 20140859]
Wavin PVC Pressure Pipe systems Reducing T-branch fitting 90°, PVC-U, PN16, d - 90x75x90 [Code number: 20140859]
Details 		20140859

ATTENTION! This product is temporarily unavailable for order!

d1 d2 Z1 Z2 B PN
mm mm mm mm mm bar
90 75 46 46 51 16
Photo Draft
Photo Wavin PVC Pressure Pipe systems Elbow 45°, PVC-U, PN16, d - 160 [Code number: 20156174] Draft Wavin PVC Pressure Pipe systems Elbow 45°, PVC-U, PN16, d - 160 [Code number: 20156174]
Wavin PVC Pressure Pipe systems Elbow 45°, PVC-U, PN16, d - 160 [Code number: 20156174]
Details 		20156174

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin elbow for pressure piping systems can be used for installation of pipeline with pressure up to 16 bar. It is used for changing the direction of the pipeline by 45°. You can see the appearance of elbow and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

d Z B PN
mm mm mm bar
160 60 86 16
Photo Draft
Photo Wavin PVC Pressure Pipe systems Reducing T-branch fitting 90°, PVC-U, PN16, d - 110x32x110 [Code number: 20146819] Draft Wavin PVC Pressure Pipe systems Reducing T-branch fitting 90°, PVC-U, PN16, d - 110x32x110 [Code number: 20146819]
Wavin PVC Pressure Pipe systems Reducing T-branch fitting 90°, PVC-U, PN16, d - 110x32x110 [Code number: 20146819]
Details 		20146819

ATTENTION! This product is temporarily unavailable for order!

d1 d2 Z1 Z2 B PN
mm mm mm mm mm bar
110 32 56 56 61 16
Photo Draft
Photo Wavin PVC Pressure Pipe systems Elbow 45°, PVC-U, PN16, d - 200 [Code number: 20160174] Draft Wavin PVC Pressure Pipe systems Elbow 45°, PVC-U, PN16, d - 200 [Code number: 20160174]
Wavin PVC Pressure Pipe systems Elbow 45°, PVC-U, PN16, d - 200 [Code number: 20160174]
Details 		20160174

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin elbow for pressure piping systems can be used for installation of pipeline with pressure up to 16 bar. It is used for changing the direction of the pipeline by 45°. You can see the appearance of elbow and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

d Z B PN
mm mm mm bar
200 49 107 16
Photo Draft
Photo Wavin PVC Pressure Pipe systems Reducing T-branch fitting 90°, PVC-U, PN16, d - 110x40x110 [Code number: 20146829] Draft Wavin PVC Pressure Pipe systems Reducing T-branch fitting 90°, PVC-U, PN16, d - 110x40x110 [Code number: 20146829]
Wavin PVC Pressure Pipe systems Reducing T-branch fitting 90°, PVC-U, PN16, d - 110x40x110 [Code number: 20146829]
Details 		20146829

ATTENTION! This product is temporarily unavailable for order!

d1 d2 Z1 Z2 B PN
mm mm mm mm mm bar
110 40 56 72 61 16
Photo Draft
Photo Wavin PVC Pressure Pipe systems Elbow 45°, PVC-U, PN16, d - 225 [Code number: 20162174] Draft Wavin PVC Pressure Pipe systems Elbow 45°, PVC-U, PN16, d - 225 [Code number: 20162174]
Wavin PVC Pressure Pipe systems Elbow 45°, PVC-U, PN16, d - 225 [Code number: 20162174]
Details 		20162174

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin elbow for pressure piping systems can be used for installation of pipeline with pressure up to 16 bar. It is used for changing the direction of the pipeline by 45°. You can see the appearance of elbow and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

d Z B PN
mm mm mm bar
225 54 120 16
Photo Draft
Photo [NO LONGER PRODUCED] - Geberit HDPE Threaded connector with screw cap, d90 (old) [Code number: 366.750.00.1] Draft [NO LONGER PRODUCED] - Geberit HDPE Threaded connector with screw cap, d90 (old) [Code number: 366.750.00.1]
[NO LONGER PRODUCED] - Geberit HDPE Threaded connector with screw cap, d90 (old) [Code number: 366.750.00.1]
Details 		366.750.00.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For all drainage pipes

Characteristics:

  • UV-resistant

Scope of delivery:

  • Sealing cap PP
  • Seal EPDM

Material: HDPE

d Rg D H h h1 h2
mm mm/'' cm cm cm cm cm
90 110 x 1/4 12,9 9,7 4,8 7,5 2,5
Photo Draft
Photo Wavin PVC Pressure Pipe systems Reducing T-branch fitting 90°, PVC-U, PN16, d - 110x50x110 [Code number: 20146839] Draft Wavin PVC Pressure Pipe systems Reducing T-branch fitting 90°, PVC-U, PN16, d - 110x50x110 [Code number: 20146839]
Wavin PVC Pressure Pipe systems Reducing T-branch fitting 90°, PVC-U, PN16, d - 110x50x110 [Code number: 20146839]
Details 		20146839

ATTENTION! This product is temporarily unavailable for order!

d1 d2 Z1 Z2 B PN
mm mm mm mm mm bar
110 50 56 56 61 16
Photo Draft
Photo Wavin PVC Pressure Pipe systems Elbow 45°, PVC-U, PN10, d - 250 [Code number: 20164074] Draft Wavin PVC Pressure Pipe systems Elbow 45°, PVC-U, PN10, d - 250 [Code number: 20164074]
Wavin PVC Pressure Pipe systems Elbow 45°, PVC-U, PN10, d - 250 [Code number: 20164074]
Details 		20164074

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin elbow for pressure piping systems can be used for installation of pipeline with pressure up to 10 bar. It is used for changing the direction of the pipeline by 45°. You can see the appearance of elbow and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

d Z B PN
mm mm mm bar
250 60 132 10
Photo Draft
Photo Hutterer & Lechner Shower gutter to be used in the surface (h = 31 mm!), vertical drain DN50, without cover, length 900 mm [Code number: HL 50FV.0/90] Draft Hutterer & Lechner Shower gutter to be used in the surface (h = 31 mm!), vertical drain DN50, without cover, length 900 mm [Code number: HL 50FV.0/90]
Hutterer & Lechner Shower gutter to be used in the surface (h = 31 mm!), vertical drain DN50, without cover, length 900 mm [Code number: HL 50FV.0/90]
Details 		HL 50FV.0/90 96 532 rub

Flat shower gutter HL 50FV.0/90 comes with adjustable screws pads. Height of the siphon cartridge is 50 mm. Shower gutter is supplied with PP drain DN50 with vertical outlet. Body of gutter with sanded flange for connection to hydroinsulation. Installation length is 900 mm, capacity is 0,8 l/s.

Diameter Size, mm LY Capacity Load Quantity of siphon cartridges
DN, mm L H min мм l/s kg pieces
50 900 31 800 0,8 300 1
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 4,6 0,0513375

Documentation

Download data sheet: Shower gutter HL 50FV.0/90
Photo Draft
Photo Wavin PVC Pressure Pipe systems Reducing T-branch fitting 90°, PVC-U, PN16, d - 110x63x110 [Code number: 20146849] Draft Wavin PVC Pressure Pipe systems Reducing T-branch fitting 90°, PVC-U, PN16, d - 110x63x110 [Code number: 20146849]
Wavin PVC Pressure Pipe systems Reducing T-branch fitting 90°, PVC-U, PN16, d - 110x63x110 [Code number: 20146849]
Details 		20146849

ATTENTION! This product is temporarily unavailable for order!

d1 d2 Z1 Z2 B PN
mm mm mm mm mm bar
110 63 56 65 61 16
Photo Draft
Photo Wavin PVC Pressure Pipe systems Elbow 45°, PVC-U, PN10, d - 280 [Code number: 20166074] Draft Wavin PVC Pressure Pipe systems Elbow 45°, PVC-U, PN10, d - 280 [Code number: 20166074]
Wavin PVC Pressure Pipe systems Elbow 45°, PVC-U, PN10, d - 280 [Code number: 20166074]
Details 		20166074

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin elbow for pressure piping systems can be used for installation of pipeline with pressure up to 10 bar. It is used for changing the direction of the pipeline by 45°. You can see the appearance of elbow and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

d Z B PN
mm mm mm bar
280 66 147 10
Photo Draft
Photo Hutterer & Lechner Stainless steel cover 'Individual', fitting to gutter length 700mm [Code number: HL 050I/70] Draft Hutterer & Lechner Stainless steel cover 'Individual', fitting to gutter length 700mm [Code number: HL 050I/70]
Hutterer & Lechner Stainless steel cover 'Individual', fitting to gutter length 700mm [Code number: HL 050I/70]
Details 		HL 050I/70 28 293 rub

HL 050I/70 - it is stainless steel cover "Individual", it is length is 600 mm. Height of the cover is adjustable 16 - 30 mm. It is used to insert mosaic tiles. It can endure load up to 300 kg.

Size, mm Material Load Weight
L H   kg gr
600 16 - 30 stainless steel
matt		 300 914
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 0,924 0
Photo Draft
Photo Wavin PVC Pressure Pipe systems Reducing T-branch fitting 90°, PVC-U, PN16, d - 110x75x110 [Code number: 20146859] Draft Wavin PVC Pressure Pipe systems Reducing T-branch fitting 90°, PVC-U, PN16, d - 110x75x110 [Code number: 20146859]
Wavin PVC Pressure Pipe systems Reducing T-branch fitting 90°, PVC-U, PN16, d - 110x75x110 [Code number: 20146859]
Details 		20146859

ATTENTION! This product is temporarily unavailable for order!

d1 d2 Z1 Z2 B PN
mm mm mm mm mm bar
110 75 56 65 61 16
Photo Draft
Photo Wavin PVC Pressure Pipe systems Elbow 45°, PVC-U, PN10, d - 315 [Code number: 20170074] Draft Wavin PVC Pressure Pipe systems Elbow 45°, PVC-U, PN10, d - 315 [Code number: 20170074]
Wavin PVC Pressure Pipe systems Elbow 45°, PVC-U, PN10, d - 315 [Code number: 20170074]
Details 		20170074

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin elbow for pressure piping systems can be used for installation of pipeline with pressure up to 10 bar. It is used for changing the direction of the pipeline by 45°. You can see the appearance of elbow and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

d Z B PN
mm mm mm bar
315 74 165 10
Photo Draft
Photo Hutterer & Lechner Cover 'Individual', fitting to gutter length 800mm [Code number: HL 050I/80] Draft Hutterer & Lechner Cover 'Individual', fitting to gutter length 800mm [Code number: HL 050I/80]
Hutterer & Lechner Cover 'Individual', fitting to gutter length 800mm [Code number: HL 050I/80]
Details 		HL 050I/80 29 997 rub

HL 050I/80 - it is cover "Individual" with a welded on U-profile of stainless steel, it is length is 700 mm. Height of the cover is adjustable. You can glue tile on the cover with mastic but mastic layer thickness should not be more than 30 mm. It can endure load up to 300 kg.

Size, mm Material Load Weight
L H   kg gr
700 16 - 30 stainless steel
matt		 300 1060
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 1,07 0
Photo Draft
Photo Wavin PVC Pressure Pipe systems Reducing T-branch fitting 90°, PVC-U, PN16, d - 110x90x110 [Code number: 20146869] Draft Wavin PVC Pressure Pipe systems Reducing T-branch fitting 90°, PVC-U, PN16, d - 110x90x110 [Code number: 20146869]
Wavin PVC Pressure Pipe systems Reducing T-branch fitting 90°, PVC-U, PN16, d - 110x90x110 [Code number: 20146869]
Details 		20146869

ATTENTION! This product is temporarily unavailable for order!

d1 d2 Z1 Z2 B PN
mm mm mm mm mm bar
110 90 56 56 61 16
Photo Draft
Photo Wavin PVC Pressure Pipe systems Elbow 45°, PVC-U, PN10, d - 400 [Code number: 20176074] Draft Wavin PVC Pressure Pipe systems Elbow 45°, PVC-U, PN10, d - 400 [Code number: 20176074]
Wavin PVC Pressure Pipe systems Elbow 45°, PVC-U, PN10, d - 400 [Code number: 20176074]
Details 		20176074

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin elbow for pressure piping systems can be used for installation of pipeline with pressure up to 10 bar. It is used for changing the direction of the pipeline by 45°. You can see the appearance of elbow and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

d Z B PN
mm mm mm bar
400 86,5 207 10
Photo Draft
Photo Hutterer & Lechner Cover 'Individual', fitting to gutter length 900mm [Code number: HL 050I/90] Draft Hutterer & Lechner Cover 'Individual', fitting to gutter length 900mm [Code number: HL 050I/90]
Hutterer & Lechner Cover 'Individual', fitting to gutter length 900mm [Code number: HL 050I/90]
Details 		HL 050I/90 32 301 rub

HL 050I/90 - it is cover "Individual" with a welded on U-profile of stainless steel, it is length is 800 mm. Height of the cover is adjustable 16 - 30 mm. You can use it for insert mosaic tiles but mastic layer thickness should not be more than 16 mm. It can endure load up to 300 kg.

Size, mm Material Load Weight
L H   kg gr
800 16 - 30 stainless steel
matt		 300 1213
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 1,223 0
Photo Draft
Photo Wavin PVC Pressure Pipe systems Reducing elbow 90° with male thread, PVC-U, PN10, d - 50-1 1/4" [Code number: 20126644] Draft Wavin PVC Pressure Pipe systems Reducing elbow 90° with male thread, PVC-U, PN10, d - 50-1 1/4" [Code number: 20126644]
Wavin PVC Pressure Pipe systems Reducing elbow 90° with male thread, PVC-U, PN10, d - 50-1 1/4" [Code number: 20126644]
Details 		20126644

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin reducing elbow for pressure piping systems can be used for installation of pipeline with pressure up to 10 bar. It is used for changing the direction of the pipeline by 90°. There is a male thread. You can see the appearance of elbow and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

d G Z1 Z2 B PN
mm mm mm mm mm bar
50 1 1/4" 28 34 31 10
© Inrusstrade.ru 1999-2025. "Inrusstrade" Ltd. Copying and quoting is prohibited