Logo
Ru| En
Loading

Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Name Article Price
Wavin PVC Pressure Pipe systems Elbow 45°, PVC-U, PN10, d - 250 [Code number: 20164074]
Details
20164074

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin elbow for pressure piping systems can be used for installation of pipeline with pressure up to 10 bar. It is used for changing the direction of the pipeline by 45°. You can see the appearance of elbow and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

d Z B PN
mm mm mm bar
250 60 132 10
Hutterer & Lechner Shower gutter to be used in the surface (h = 31 mm!), vertical drain DN50, without cover, length 900 mm [Code number: HL 50FV.0/90]
Details
HL 50FV.0/90 88 138 rub

Flat shower gutter HL 50FV.0/90 comes with adjustable screws pads. Height of the siphon cartridge is 50 mm. Shower gutter is supplied with PP drain DN50 with vertical outlet. Body of gutter with sanded flange for connection to hydroinsulation. Installation length is 900 mm, capacity is 0,8 l/s.

Diameter Size, mm LY Capacity Load Quantity of siphon cartridges
DN, mm L H min мм l/s kg pieces
50 900 31 800 0,8 300 1
 
Material of spare parts
Gutter Drain Trap body
     
stainless steel polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 185 1500 4,6 0,0513375
Wavin PVC Pressure Pipe systems Reducing T-branch fitting 90°, PVC-U, PN16, d - 110x63x110 [Code number: 20146849]
Details
20146849

ATTENTION! This product is temporarily unavailable for order!

d1 d2 Z1 Z2 B PN
mm mm mm mm mm bar
110 63 56 65 61 16
Wavin PVC Pressure Pipe systems Elbow 45°, PVC-U, PN10, d - 280 [Code number: 20166074]
Details
20166074

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin elbow for pressure piping systems can be used for installation of pipeline with pressure up to 10 bar. It is used for changing the direction of the pipeline by 45°. You can see the appearance of elbow and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

d Z B PN
mm mm mm bar
280 66 147 10
Hutterer & Lechner Stainless steel cover 'Individual', fitting to gutter length 700mm [Code number: HL 050I/70]
Details
HL 050I/70 25 833 rub

HL 050I/70 - it is stainless steel cover "Individual", it is length is 600 mm. Height of the cover is adjustable 16 - 30 mm. It is used to insert mosaic tiles. It can endure load up to 300 kg.

Size, mm Material Load Weight
L H   kg gr
600 16 - 30 stainless steel
matt
300 914
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 0,924 0
Wavin PVC Pressure Pipe systems Reducing T-branch fitting 90°, PVC-U, PN16, d - 110x75x110 [Code number: 20146859]
Details
20146859

ATTENTION! This product is temporarily unavailable for order!

d1 d2 Z1 Z2 B PN
mm mm mm mm mm bar
110 75 56 65 61 16
Wavin PVC Pressure Pipe systems Elbow 45°, PVC-U, PN10, d - 315 [Code number: 20170074]
Details
20170074

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin elbow for pressure piping systems can be used for installation of pipeline with pressure up to 10 bar. It is used for changing the direction of the pipeline by 45°. You can see the appearance of elbow and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

d Z B PN
mm mm mm bar
315 74 165 10
Hutterer & Lechner Cover 'Individual', fitting to gutter length 800mm [Code number: HL 050I/80]
Details
HL 050I/80 27 389 rub

HL 050I/80 - it is cover "Individual" with a welded on U-profile of stainless steel, it is length is 700 mm. Height of the cover is adjustable. You can glue tile on the cover with mastic but mastic layer thickness should not be more than 30 mm. It can endure load up to 300 kg.

Size, mm Material Load Weight
L H   kg gr
700 16 - 30 stainless steel
matt
300 1060
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 1,07 0
Wavin PVC Pressure Pipe systems Reducing T-branch fitting 90°, PVC-U, PN16, d - 110x90x110 [Code number: 20146869]
Details
20146869

ATTENTION! This product is temporarily unavailable for order!

d1 d2 Z1 Z2 B PN
mm mm mm mm mm bar
110 90 56 56 61 16
Wavin PVC Pressure Pipe systems Elbow 45°, PVC-U, PN10, d - 400 [Code number: 20176074]
Details
20176074

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin elbow for pressure piping systems can be used for installation of pipeline with pressure up to 10 bar. It is used for changing the direction of the pipeline by 45°. You can see the appearance of elbow and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

d Z B PN
mm mm mm bar
400 86,5 207 10
Hutterer & Lechner Cover 'Individual', fitting to gutter length 900mm [Code number: HL 050I/90]
Details
HL 050I/90 29 492 rub

HL 050I/90 - it is cover "Individual" with a welded on U-profile of stainless steel, it is length is 800 mm. Height of the cover is adjustable 16 - 30 mm. You can use it for insert mosaic tiles but mastic layer thickness should not be more than 16 mm. It can endure load up to 300 kg.

Size, mm Material Load Weight
L H   kg gr
800 16 - 30 stainless steel
matt
300 1213
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 1,223 0
Wavin PVC Pressure Pipe systems Reducing elbow 90° with male thread, PVC-U, PN10, d - 50-1 1/4" [Code number: 20126644]
Details
20126644

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin reducing elbow for pressure piping systems can be used for installation of pipeline with pressure up to 10 bar. It is used for changing the direction of the pipeline by 90°. There is a male thread. You can see the appearance of elbow and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

d G Z1 Z2 B PN
mm mm mm mm mm bar
50 1 1/4" 28 34 31 10
Wavin PVC Pressure Pipe systems Reducing T-branch fitting 90°, PVC-U, PN16, d - 160x75x160 [Code number: 20156819]
Details
20156819

ATTENTION! This product is temporarily unavailable for order!

d1 d2 Z1 Z2 B PN
mm mm mm mm mm bar
160 75 81 91 86 16
Hutterer & Lechner Cover 'Standard', fitting to gutter length 1000mm [Code number: HL 050S/100]
Details
HL 050S/100 13 336 rub

HL 050S/100 - it is stainless steel cover "Standard", it is length is 900 mm. Height of the cover is adjustable. You can glue tile on the cover with mastic but mastic layer thickness should not be more than 16 mm. It can endure load up to 300 kg.

Size, mm Material Load Weight
L H   kg gr
900 2 - 16 stainless steel 300 746
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 0,756 0
Wavin PVC Pressure Pipe systems Reducing elbow 90° with male thread, PVC-U, PN10, d - 50-1 1/2" [Code number: 20126634]
Details
20126634

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin reducing elbow for pressure piping systems can be used for installation of pipeline with pressure up to 10 bar. It is used for changing the direction of the pipeline by 90°. There is a male thread. You can see the appearance of elbow and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

d G Z1 Z2 B PN
mm mm mm mm mm bar
50 1 1/2" 28 34 31 10
Wavin PVC Pressure Pipe systems Reducing T-branch fitting 90°, PVC-U, PN16, d - 160x90x160 [Code number: 20156829]
Details
20156829

ATTENTION! This product is temporarily unavailable for order!

d1 d2 Z1 Z2 B PN
mm mm mm mm mm bar
160 90 81 91 86 16
Hutterer & Lechner Cover 'Standard', fitting to gutter length 1100mm [Code number: HL 050S/110]
Details
HL 050S/110 13 702 rub

HL 050S/110 - it is cover "Standard", it is length is 1000 mm. Height of the cover is adjustable 2 - 16 mm. You can glue tile on the cover with mastic but mastic layer thickness should not be more than 16 mm. The cover is made of stainless steel. It can endure load up to 300 kg.

Size, mm Material Load Weight
L H   kg gr
1000 2 - 16 stainless steel 300 830
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 0,84 0
Wavin PVC Pressure Pipe systems Reducing elbow 90° with male thread, PVC-U, PN10, d - 50-2" [Code number: 20126624]
Details
20126624

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin reducing elbow for pressure piping systems can be used for installation of pipeline with pressure up to 10 bar. It is used for changing the direction of the pipeline by 90°. There is a male thread. You can see the appearance of elbow and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

d G Z1 Z2 B PN
mm mm mm mm mm bar
50 2" 28 34 31 10
Wavin PVC Pressure Pipe systems Reducing T-branch fitting 90°, PVC-U, PN16, d - 160x110x160 [Code number: 20156839]
Details
20156839

ATTENTION! This product is temporarily unavailable for order!

d1 d2 Z1 Z2 B PN
mm mm mm mm mm bar
160 110 81 81 86 16
Hutterer & Lechner Cover 'Standard', fitting to gutter length 1200mm [Code number: HL 050S/120]
Details
HL 050S/120 14 117 rub

HL 050S/120 - it is cover "Standard", it is length is 1100 mm. Height of the cover is adjustable 2 - 16 mm. You can glue tile on the cover with mastic but mastic layer thickness should not be more than 16 mm. The cover is made of stainless steel. It can endure load up to 300 kg.

Size, mm Material Load Weight
L H   kg gr
1100 2 - 16 stainless steel 300 900
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 0,912 0