Logo
Ru| En

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Name Article Price
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 359.451.00.2] - Geberit HDPE Clamp connector, d 210, d1 210 [Code number: 359.451.00.1] Draft [NO LONGER PRODUCED. REPLACEMENT: 359.451.00.2] - Geberit HDPE Clamp connector, d 210, d1 210 [Code number: 359.451.00.1]
[NO LONGER PRODUCED. REPLACEMENT: 359.451.00.2] - Geberit HDPE Clamp connector, d 210, d1 210 [Code number: 359.451.00.1]
Details 		359.451.00.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For connecting pipes and fittings made of the same or different product materials

Characteristics:

  • With seal made of EPDM

Scope of delivery:

  • Screws (2 pcs)

Material: Stainless steel

d d1 D H E X
mm mm cm cm cm cm
210 210 22,5 6,8 3,2 0,4
Photo Draft
Photo Wavin PVC Pressure Pipe systems T-branch fitting 90° with male thread, PVC-U, PN10, d1 - 50, d2 - 1 1/4" [Code number: 20126918] Draft Wavin PVC Pressure Pipe systems T-branch fitting 90° with male thread, PVC-U, PN10, d1 - 50, d2 - 1 1/4" [Code number: 20126918]
Wavin PVC Pressure Pipe systems T-branch fitting 90° with male thread, PVC-U, PN10, d1 - 50, d2 - 1 1/4" [Code number: 20126918]
Details 		20126918

ATTENTION! This product is temporarily unavailable for order!

d1 d2 В С PN
mm   mm mm bar
50 1 1/4" 31 21 10
Photo Draft
Photo Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN10, d - 90 [Code number: 20140105] Draft Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN10, d - 90 [Code number: 20140105]
Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN10, d - 90 [Code number: 20140105]
Details 		20140105

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 10 bar. It is used for changing the direction of the pipeline by 90°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

PN d Z B
bar   mm mm
10 90 142 58
Photo Draft
Photo Hutterer & Lechner Cover 'Individual', fitting to gutter length 1000mm [Code number: HL 050I/100] Draft Hutterer & Lechner Cover 'Individual', fitting to gutter length 1000mm [Code number: HL 050I/100]
Hutterer & Lechner Cover 'Individual', fitting to gutter length 1000mm [Code number: HL 050I/100]
Details 		HL 050I/100 30 817 rub

HL 050I/100 - it is cover "Individual", it is length is 900 mm. Height of the cover is adjustable. You can glue tile on the cover with mastic but mastic layer thickness should not be more than 30 mm. The cover has a welded on U-profile of stainless steel. It can endure load up to 300 kg.

Size, mm Material Load Weight
L H   kg gr
900 16 - 30 stainless steel
matt		 300 1412
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 1,422 0
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 359.450.00.2] - Geberit HDPE Clamp connector, d 159 - 160, d1 168 [Code number: 359.450.00.1] Draft [NO LONGER PRODUCED. REPLACEMENT: 359.450.00.2] - Geberit HDPE Clamp connector, d 159 - 160, d1 168 [Code number: 359.450.00.1]
[NO LONGER PRODUCED. REPLACEMENT: 359.450.00.2] - Geberit HDPE Clamp connector, d 159 - 160, d1 168 [Code number: 359.450.00.1]
Details 		359.450.00.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For connecting pipes and fittings made of the same or different product materials

Characteristics:

  • With seal made of EPDM

Scope of delivery:

  • Screws (2 pcs)

Material: Stainless steel

d d1 D H E X
mm mm cm cm cm cm
159 - 160 168 18,3 6,8 3,2 0,4
Photo Draft
Photo Wavin PVC Pressure Pipe systems T-branch fitting 90° with male thread, PVC-U, PN10, d1 - 50, d2 - 1 1/2" [Code number: 20126919] Draft Wavin PVC Pressure Pipe systems T-branch fitting 90° with male thread, PVC-U, PN10, d1 - 50, d2 - 1 1/2" [Code number: 20126919]
Wavin PVC Pressure Pipe systems T-branch fitting 90° with male thread, PVC-U, PN10, d1 - 50, d2 - 1 1/2" [Code number: 20126919]
Details 		20126919

ATTENTION! This product is temporarily unavailable for order!

d1 d2 В С PN
mm   mm mm bar
50 1 1/2" 31 21 10
Photo Draft
Photo Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN16, d - 90 [Code number: 20140106] Draft Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN16, d - 90 [Code number: 20140106]
Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN16, d - 90 [Code number: 20140106]
Details 		20140106

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 16 bar. It is used for changing the direction of the pipeline by 90°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

PN d Z B
bar   mm mm
16 90 142 58
Photo Draft
Photo Hutterer & Lechner Cover 'Individual', fitting to gutter length 1100mm [Code number: HL 050I/110] Draft Hutterer & Lechner Cover 'Individual', fitting to gutter length 1100mm [Code number: HL 050I/110]
Hutterer & Lechner Cover 'Individual', fitting to gutter length 1100mm [Code number: HL 050I/110]
Details 		HL 050I/110 32 490 rub

HL 050I/110 - it is "Individual", it is length is 1000 mm. Height of the cover is adjustable. You can insert tile on the cover with mastic but mastic layer thickness should not be more than 30 mm. The cover is made of stainless steel. It can endure load up to 300 kg.

Size, mm Material Load Weight
L H   kg gr
1000 16 - 30 stainless steel
matt		 300 1488
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 1,498 0
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 359.449.00.2] - Geberit HDPE Clamp connector, d 159 - 160, d1 159 - 160 [Code number: 359.449.00.1] Draft [NO LONGER PRODUCED. REPLACEMENT: 359.449.00.2] - Geberit HDPE Clamp connector, d 159 - 160, d1 159 - 160 [Code number: 359.449.00.1]
[NO LONGER PRODUCED. REPLACEMENT: 359.449.00.2] - Geberit HDPE Clamp connector, d 159 - 160, d1 159 - 160 [Code number: 359.449.00.1]
Details 		359.449.00.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For connecting pipes and fittings made of the same or different product materials

Characteristics:

  • With seal made of EPDM

Scope of delivery:

  • Screws (2 pcs)

Material: Stainless steel

d d1 D H E X
mm mm cm cm cm cm
159 - 160 159 - 160 17,5 6,8 3,2 0,4
Photo Draft
Photo Wavin PVC Pressure Pipe systems T-branch fitting 90° with male thread, PVC-U, PN16, d1 - 63, d2 - 1 1/4" [Code number: 20134818] Draft Wavin PVC Pressure Pipe systems T-branch fitting 90° with male thread, PVC-U, PN16, d1 - 63, d2 - 1 1/4" [Code number: 20134818]
Wavin PVC Pressure Pipe systems T-branch fitting 90° with male thread, PVC-U, PN16, d1 - 63, d2 - 1 1/4" [Code number: 20134818]
Details 		20134818

ATTENTION! This product is temporarily unavailable for order!

d1 d2 В С PN
mm   mm mm bar
63 1 1/4" 38 21 16
Photo Draft
Photo Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN12,5, d - 110 [Code number: 20146105] Draft Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN12,5, d - 110 [Code number: 20146105]
Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN12,5, d - 110 [Code number: 20146105]
Details 		20146105

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 12,5 bar. It is used for changing the direction of the pipeline by 90°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

PN d Z B
bar   mm mm
12,5 110 175 70
Photo Draft
Photo Hutterer & Lechner Cover 'Individual', fitting to gutter length 1200mm [Code number: HL 050I/120] Draft Hutterer & Lechner Cover 'Individual', fitting to gutter length 1200mm [Code number: HL 050I/120]
Hutterer & Lechner Cover 'Individual', fitting to gutter length 1200mm [Code number: HL 050I/120]
Details 		HL 050I/120 33 753 rub

HL 050I/120 - it is cover "Individual", it is length is 1100 mm. Height of the cover is adjustable. You can insert tile on the cover with mastic but mastic layer thickness should not be more than 30 mm. The cover is made of stainless steel. It can endure load up to 300 kg.

Size, mm Material Load Weight
L H   kg gr
1100 16 - 30 stainless steel
matt		 300 1723
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 1,733 0
Photo Draft
Photo [NO LONGER PRODUCED] - Geberit HDPE Clamp connector, d 159 - 160, d1 152 [Code number: 359.448.00.1] Draft [NO LONGER PRODUCED] - Geberit HDPE Clamp connector, d 159 - 160, d1 152 [Code number: 359.448.00.1]
[NO LONGER PRODUCED] - Geberit HDPE Clamp connector, d 159 - 160, d1 152 [Code number: 359.448.00.1]
Details 		359.448.00.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For connecting pipes and fittings made of the same or different product materials

Characteristics:

  • With seal made of EPDM

Scope of delivery:

  • Screws (2 pcs)

Material: Stainless steel

d d1 D H E X
mm mm cm cm cm cm
159 - 160 152 17,5 6,8 3,2 0,4
Photo Draft
Photo Wavin PVC Pressure Pipe systems T-branch fitting 90° with male thread, PVC-U, PN16, d1 - 63, d2 - 1 1/2" [Code number: 20134817] Draft Wavin PVC Pressure Pipe systems T-branch fitting 90° with male thread, PVC-U, PN16, d1 - 63, d2 - 1 1/2" [Code number: 20134817]
Wavin PVC Pressure Pipe systems T-branch fitting 90° with male thread, PVC-U, PN16, d1 - 63, d2 - 1 1/2" [Code number: 20134817]
Details 		20134817

ATTENTION! This product is temporarily unavailable for order!

d1 d2 В С PN
mm   mm mm bar
63 1 1/2" 38 21 16
Photo Draft
Photo Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN12,5, d - 160 [Code number: 20156105] Draft Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN12,5, d - 160 [Code number: 20156105]
Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN12,5, d - 160 [Code number: 20156105]
Details 		20156105

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 12,5 bar. It is used for changing the direction of the pipeline by 90°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

PN d Z B
bar   mm mm
12,5 160 260 99
Photo Draft
Photo Hutterer & Lechner Cover 'Individual', fitting to gutter length 1300mm [Code number: HL 050I/130] Draft Hutterer & Lechner Cover 'Individual', fitting to gutter length 1300mm [Code number: HL 050I/130]
Hutterer & Lechner Cover 'Individual', fitting to gutter length 1300mm [Code number: HL 050I/130]
Details 		HL 050I/130 42 453 rub

HL 050I/130 - it is stainless steel cover "Individual", it is length is 1200 mm. Height of the cover is adjustable. You can glue tile on the cover with mastic but mastic layer thickness should not be more than 30 mm. The cover has a welded on U-profile. It can endure load up to 300 kg.

Size, mm Material Load Weight
L H   kg gr
1200 16 - 30 stainless steel
matt		 300 1855
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 1,867 0
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 359.447.00.2] - Geberit HDPE Adaptor clamping connector, d 140 - 141, d1 140 - 141 [Code number: 359.447.00.1] Draft [NO LONGER PRODUCED. REPLACEMENT: 359.447.00.2] - Geberit HDPE Adaptor clamping connector, d 140 - 141, d1 140 - 141 [Code number: 359.447.00.1]
[NO LONGER PRODUCED. REPLACEMENT: 359.447.00.2] - Geberit HDPE Adaptor clamping connector, d 140 - 141, d1 140 - 141 [Code number: 359.447.00.1]
Details 		359.447.00.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For connecting pipes and fittings made of the same or different product materials

Characteristics:

  • With seal made of EPDM

Material: Stainless steel

d d1 D H E X
mm mm cm cm cm cm
140 - 141 140 - 141 15,6 6,8 3,2 0,4
Photo Draft
Photo Wavin PVC Pressure Pipe systems T-branch fitting 90° with male thread, PVC-U, PN16, d1 - 63, d2 - 2" [Code number: 20134816] Draft Wavin PVC Pressure Pipe systems T-branch fitting 90° with male thread, PVC-U, PN16, d1 - 63, d2 - 2" [Code number: 20134816]
Wavin PVC Pressure Pipe systems T-branch fitting 90° with male thread, PVC-U, PN16, d1 - 63, d2 - 2" [Code number: 20134816]
Details 		20134816

ATTENTION! This product is temporarily unavailable for order!

d1 d2 В С PN
mm   mm mm bar
63 2" 38 26 16
Photo Draft
Photo Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN12,5, d - 200 [Code number: 20160105] Draft Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN12,5, d - 200 [Code number: 20160105]
Wavin PVC Pressure Pipe systems Bend 90°, PVC-U, PN12,5, d - 200 [Code number: 20160105]
Details 		20160105

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 12,5 bar. It is used for changing the direction of the pipeline by 90°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

PN d Z B
bar   mm mm
12,5 200 330 122
Photo Draft
Photo Hutterer & Lechner Cover 'Individual', fitting to gutter length 1400mm [Code number: HL 050I/140] Draft Hutterer & Lechner Cover 'Individual', fitting to gutter length 1400mm [Code number: HL 050I/140]
Hutterer & Lechner Cover 'Individual', fitting to gutter length 1400mm [Code number: HL 050I/140]
Details 		HL 050I/140 47 450 rub

HL 050I/140 - it is stainless steel cover "Individual", it is length is 1300 mm. Height of the cover is adjustable. You can glue tile on the cover with mastic but mastic layer thickness should not be more than 30 mm. The cover has a welded on U-profile. It can endure load up to 300 kg.

Size, mm Material Load Weight
L H   kg gr
1300 16 - 30 stainless steel
matt		 300 2003
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 2,015 0

© Inrusstrade.ru 1999-2024. "Inrusstrade" Ltd. Copying and quoting is prohibited