Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Lenin Hills

Sinikon pipe crosses

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage→ Pipe crosses for domestic sewerage→ Sinikon pipe crosses

Sinikon pipe crosses are designed for branching polypropylene domestic drainage system. The pipe cross is a short pipe with two branches which can be located both in one plane and in different planes. The angle and diameter of the branches depend on the pipe cross model.

In this section, the pipe crosses of two types are presented, and their characteristics are given in the table below:

 

  Standart Comfort
Method of manufacture Method of injection molding from propylene homopolymer (type 1) PP-H Method of extrusion from propylene homopolymer (type 1) PP-H with mineral additives
Density, g/cm3 0,9-0,95 1,1 -1,25
Coefficient of linear expansion, mm/m°С 0,15 0,15
Melting temperature, °С >160 +250
Thermal conductivity, W/m°С 0,26 0,26

 

The main advantages of polypropylene pipe crosses:

  • Low probability of blockage due to smooth inner surface;
  • Resistance to light aging;
  • Resistance to corrosion;
  • Resistance to chemically aggressive effluent with pH value of 2 to 12;
  • Aesthetic appearance;
  • Low weight;
  • Simple installation which does not require the use of special tools and devices;
  • Environmental safety.
Photo Наименование Article Цена
Photo Draft
Photo SINIKON Standart Corner branch fitting 67°, PP, d - 110*110*110 [Code number: 512001] Draft SINIKON Standart Corner branch fitting 67°, PP, d - 110*110*110 [Code number: 512001]
SINIKON Standart Corner branch fitting 67°, PP, d - 110*110*110 [Code number: 512001]
Details 		512001 1 040 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years

Rule for determining the execution (right or left) of two-plane crosses D110x110x50:

when holding the cross in the working position, with the socket up, and when the socket D110mm is directed towards you, the position of the socket D50mm on the right or left determines the execution of the cross.

d d1 d2 Angle Weight Colour
mm mm mm   kg  
110 110 110 67° 0,440 Gray
Photo Draft
Photo SINIKON Standart Corner branch fitting 67°, left, PP, d - 110*50*110 [Code number: 512003] Draft SINIKON Standart Corner branch fitting 67°, left, PP, d - 110*50*110 [Code number: 512003]
SINIKON Standart Corner branch fitting 67°, left, PP, d - 110*50*110 [Code number: 512003]
Details 		512003 2 695 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years

Rule for determining the execution (right or left) of two-plane crosses D110x110x50:

when holding the cross in the working position, with the socket up, and when the socket D110mm is directed towards you, the position of the socket D50mm on the right or left determines the execution of the cross.

d d1 d2 Angle Weight Colour
mm mm mm   kg  
110 50 110 67° 0,360 Gray
Photo Draft
Photo SINIKON Standart Corner branch fitting 67°, right, PP, d - 110*110*50 [Code number: 512005] Draft SINIKON Standart Corner branch fitting 67°, right, PP, d - 110*110*50 [Code number: 512005]
SINIKON Standart Corner branch fitting 67°, right, PP, d - 110*110*50 [Code number: 512005]
Details 		512005 2 695 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years

Rule for determining the execution (right or left) of two-plane crosses D110x110x50:

when holding the cross in the working position, with the socket up, and when the socket D110mm is directed towards you, the position of the socket D50mm on the right or left determines the execution of the cross.

d d1 d2 Angle Weight Colour
mm mm mm   kg  
110 110 50 67° 0,360 Gray
Photo Draft
Photo SINIKON Standart Corner branch fitting 67°, PP, d - 110*50*50 [Code number: 512007] Draft SINIKON Standart Corner branch fitting 67°, PP, d - 110*50*50 [Code number: 512007]
SINIKON Standart Corner branch fitting 67°, PP, d - 110*50*50 [Code number: 512007]
Details 		512007 2 695 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years

Maximum working temperature: +90 °С

Rule for determining the execution (right or left) of two-plane crosses D110x110x50:

when holding the cross in the working position, with the socket up, and when the socket D110mm is directed towards you, the position of the socket D50mm on the right or left determines the execution of the cross.

d d1 d2 Angle Weight Colour
mm mm mm   kg  
110 50 50 67° 0,240 Gray
Photo Draft
Photo SINIKON Comfort Plus Corner branch fitting 87°, left, PP, d - 110*110*50 [Code number: 512033.K] Draft SINIKON Comfort Plus Corner branch fitting 87°, left, PP, d - 110*110*50 [Code number: 512033.K]
SINIKON Comfort Plus Corner branch fitting 87°, left, PP, d - 110*110*50 [Code number: 512033.K]
Details 		512033.K 776 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Outlet: left

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d d2 d3 Angle Wall thickness Colour
mm mm mm   mm  
110 110 50 87° 2,7 white
Photo Draft
Photo SINIKON Standart Corner branch fitting 87°, left, PP, d - 110*110*50 [Code number: 512033.R] Draft SINIKON Standart Corner branch fitting 87°, left, PP, d - 110*110*50 [Code number: 512033.R]
SINIKON Standart Corner branch fitting 87°, left, PP, d - 110*110*50 [Code number: 512033.R]
Details 		512033.R 553 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years

Rule for determining the execution (right or left) of two-plane crosses D110x110x50:

when holding the cross in the working position, with the socket up, and when the socket D110mm is directed towards you, the position of the socket D50mm on the right or left determines the execution of the cross.

d d1 d2 Angle Weight Colour
mm mm mm   kg  
110 50 110 87° 0,400 Gray
Photo Draft
Photo SINIKON Comfort Plus Corner branch fitting 87°, right, PP, d - 110*110*50 [Code number: 512035.K] Draft SINIKON Comfort Plus Corner branch fitting 87°, right, PP, d - 110*110*50 [Code number: 512035.K]
SINIKON Comfort Plus Corner branch fitting 87°, right, PP, d - 110*110*50 [Code number: 512035.K]
Details 		512035.K 776 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Outlet: right

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d d2 d3 Angle Wall thickness Colour
mm mm mm   mm  
110 110 50 87° 2,7 white
Photo Draft
Photo SINIKON Standart Corner branch fitting 87°, right, PP, d - 110*110*50 [Code number: 512035.R] Draft SINIKON Standart Corner branch fitting 87°, right, PP, d - 110*110*50 [Code number: 512035.R]
SINIKON Standart Corner branch fitting 87°, right, PP, d - 110*110*50 [Code number: 512035.R]
Details 		512035.R 553 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years

Rule for determining the execution (right or left) of two-plane crosses D110x110x50:

when holding the cross in the working position, with the socket up, and when the socket D110mm is directed towards you, the position of the socket D50mm on the right or left determines the execution of the cross.

d d1 d2 Angle Weight Colour
mm mm mm   kg  
110 110 50 87° 0,400 Gray
Photo Draft
Photo SINIKON Comfort Plus Double-sided branch fitting 87°, PP, d - 110, d1 - 110, d2 - 50 [Code number: 512037.K] Photo SINIKON Comfort Plus Double-sided branch fitting 87°, PP, d - 110, d1 - 110, d2 - 50 [Code number: 512037.K] Draft SINIKON Comfort Plus Double-sided branch fitting 87°, PP, d - 110, d1 - 110, d2 - 50 [Code number: 512037.K]
SINIKON Comfort Plus Double-sided branch fitting 87°, PP, d - 110, d1 - 110, d2 - 50 [Code number: 512037.K]
Details 		512037.K 850 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements
  • For connecting pipeline branches on both sides

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d d2 d3 Angle Wall thickness Colour
mm mm mm   mm  
110 110 50 87° 2,7 white
Photo Draft
Photo SINIKON Standart Double-sided branch fitting 87°, PP, d - 110*110*50 [Code number: 512037.R] Draft SINIKON Standart Double-sided branch fitting 87°, PP, d - 110*110*50 [Code number: 512037.R]
SINIKON Standart Double-sided branch fitting 87°, PP, d - 110*110*50 [Code number: 512037.R]
Details 		512037.R 608 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years

Rule for determining the execution (right or left) of two-plane crosses D110x110x50:

when holding the cross in the working position, with the socket up, and when the socket D110mm is directed towards you, the position of the socket D50mm on the right or left determines the execution of the cross.

d d1 d2 Angle L Colour
mm mm mm   mm  
110 110 50 87° 252 Gray
Photo Draft
Photo SINIKON Comfort Plus Corner branch 87˚, PP, d - 110/110/110 [Code number: 512041.K] Draft SINIKON Comfort Plus Corner branch 87˚, PP, d - 110/110/110 [Code number: 512041.K]
SINIKON Comfort Plus Corner branch 87˚, PP, d - 110/110/110 [Code number: 512041.K]
Details 		512041.K 1 200 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d d2 d3 Angle Wall thickness Colour
mm mm mm   mm  
110 110 110 87° 2,7 white
Photo Draft
Photo SINIKON Standart Corner branch fitting 87°, PP, d - 110х110х110 [Code number: 512041.R] Draft SINIKON Standart Corner branch fitting 87°, PP, d - 110х110х110 [Code number: 512041.R]
SINIKON Standart Corner branch fitting 87°, PP, d - 110х110х110 [Code number: 512041.R]
Details 		512041.R 608 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years

Rule for determining the execution (right or left) of two-plane crosses D110x110x50:

when holding the cross in the working position, with the socket up, and when the socket D110mm is directed towards you, the position of the socket D50mm on the right or left determines the execution of the cross.

d d1 d2 Angle Colour
mm mm mm    
110 110 110 87˚ Gray
Photo Draft
Photo SINICON Standard Double branch fitting 87°, PP, d - 125, d1 - 110, d2 - 110 [Code number: 650659.R] Draft SINICON Standard Double branch fitting 87°, PP, d - 125, d1 - 110, d2 - 110 [Code number: 650659.R]
SINICON Standard Double branch fitting 87°, PP, d - 125, d1 - 110, d2 - 110 [Code number: 650659.R]
Details 		650659.R 1 071 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2 d3 Angle Colour
mm mm mm    
125 110 110 87˚ Gray
© Inrusstrade.ru 1999-2025. "Inrusstrade" Ltd. Copying and quoting is prohibited