Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Lenin Hills

Sinikon pipe crosses

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage→ Pipe crosses for domestic sewerage→ Sinikon pipe crosses

Sinikon pipe crosses are designed for branching polypropylene domestic drainage system. The pipe cross is a short pipe with two branches which can be located both in one plane and in different planes. The angle and diameter of the branches depend on the pipe cross model.

In this section, the pipe crosses of two types are presented, and their characteristics are given in the table below:

 

  Standart Comfort
Method of manufacture Method of injection molding from propylene homopolymer (type 1) PP-H Method of extrusion from propylene homopolymer (type 1) PP-H with mineral additives
Density, g/cm3 0,9-0,95 1,1 -1,25
Coefficient of linear expansion, mm/m°С 0,15 0,15
Melting temperature, °С >160 +250
Thermal conductivity, W/m°С 0,26 0,26

 

The main advantages of polypropylene pipe crosses:

  • Low probability of blockage due to smooth inner surface;
  • Resistance to light aging;
  • Resistance to corrosion;
  • Resistance to chemically aggressive effluent with pH value of 2 to 12;
  • Aesthetic appearance;
  • Low weight;
  • Simple installation which does not require the use of special tools and devices;
  • Environmental safety.
Photo Наименование Article Цена
Photo Draft
Photo SINICON Comfort Plus Double branch 45°, d - 50, d1 - 50, d2 - 50 [Code number: 506000.K] Draft SINICON Comfort Plus Double branch 45°, d - 50, d1 - 50, d2 - 50 [Code number: 506000.K]
SINICON Comfort Plus Double branch 45°, d - 50, d1 - 50, d2 - 50 [Code number: 506000.K]
Details 		506000.K 375 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements
  • For branching the pipeline

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

D D1 D2 Angle Colour
mm mm mm    
50 50 50 45° white
Photo Draft
Photo SINIKON Standart Double branch fitting 45°, PP, PP, d - 50x50x50 [Code number: 506000.R] Draft SINIKON Standart Double branch fitting 45°, PP, PP, d - 50x50x50 [Code number: 506000.R]
SINIKON Standart Double branch fitting 45°, PP, PP, d - 50x50x50 [Code number: 506000.R]
Details 		506000.R 268 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 d2 Angle Colour
mm mm mm    
50 50 50 45˚ Gray
Photo Draft
Photo SINIKON Standart Double branch fitting 67°, PP, d - 50*50*50 [Code number: 506001] Draft SINIKON Standart Double branch fitting 67°, PP, d - 50*50*50 [Code number: 506001]
SINIKON Standart Double branch fitting 67°, PP, d - 50*50*50 [Code number: 506001]
Details 		506001 1 080 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 d2 Angle Weight Colour
mm mm mm   kg  
50 50 50 67° 0,135 Gray
Photo Draft
Photo SINICON Comfort Plus Double branch 87°, d - 50, d1 - 50, d2 - 50 [Code number: 506003.K] Draft SINICON Comfort Plus Double branch 87°, d - 50, d1 - 50, d2 - 50 [Code number: 506003.K]
SINICON Comfort Plus Double branch 87°, d - 50, d1 - 50, d2 - 50 [Code number: 506003.K]
Details 		506003.K 375 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements
  • For branching the pipeline

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

D D1 D2 Angle Colour
mm mm mm    
50 50 50 87° white
Photo Draft
Photo SINIKON Standart Double branch fitting 87°, PP, PP, d - 50x50x50 [Code number: 506003.R] Draft SINIKON Standart Double branch fitting 87°, PP, PP, d - 50x50x50 [Code number: 506003.R]
SINIKON Standart Double branch fitting 87°, PP, PP, d - 50x50x50 [Code number: 506003.R]
Details 		506003.R 268 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 d2 Angle Colour
mm mm mm    
50 50 50 87˚ Gray
Photo Draft
Photo SINIKON Comfort Plus Double branch fitting 45°, d - 110, d1 - 50, d2 - 50 [Code number: 506008.K] Draft SINIKON Comfort Plus Double branch fitting 45°, d - 110, d1 - 50, d2 - 50 [Code number: 506008.K]
SINIKON Comfort Plus Double branch fitting 45°, d - 110, d1 - 50, d2 - 50 [Code number: 506008.K]
Details 		506008.K 766 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Connection type: socket. Installation does not require the use of special tools.

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years (subject to manufacturer's recommendations)

Technical specifications

D D1 D2 Angle Colour
mm mm mm    
110 50 50 45° white
Photo Draft
Photo SINIKON Standart Double branch fitting 45°, PP, d - 110*50*50 [Code number: 506008.R] Draft SINIKON Standart Double branch fitting 45°, PP, d - 110*50*50 [Code number: 506008.R]
SINIKON Standart Double branch fitting 45°, PP, d - 110*50*50 [Code number: 506008.R]
Details 		506008.R 546 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 d2 Angle Colour
mm mm mm    
110 50 50 45° Gray
Photo Draft
Photo SINIKON Standart Double branch fitting 67°, PP, d - 110*50*50 [Code number: 506009] Draft SINIKON Standart Double branch fitting 67°, PP, d - 110*50*50 [Code number: 506009]
SINIKON Standart Double branch fitting 67°, PP, d - 110*50*50 [Code number: 506009]
Details 		506009 557 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 d2 Angle Weight Colour
mm mm mm   kg  
110 50 50 67° 0,230 Gray
Photo Draft
Photo SINIKON Comfort Plus Double branch fitting 87°, PP, d - 110*50*50 [Code number: 506011.K] Draft SINIKON Comfort Plus Double branch fitting 87°, PP, d - 110*50*50 [Code number: 506011.K]
SINIKON Comfort Plus Double branch fitting 87°, PP, d - 110*50*50 [Code number: 506011.K]
Details 		506011.K 766 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d d2 d3 Angle Wall thickness Colour
mm mm mm   mm  
110 50 50 87° 2,7 white
Photo Draft
Photo SINIKON Standart Double branch fitting 87°, PP, d - 110*50*50 [Code number: 506011.R] Draft SINIKON Standart Double branch fitting 87°, PP, d - 110*50*50 [Code number: 506011.R]
SINIKON Standart Double branch fitting 87°, PP, d - 110*50*50 [Code number: 506011.R]
Details 		506011.R 546 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 d2 Angle Weight Colour
mm mm mm   kg  
110 50 50 87° 0,250 Gray
Photo Draft
Photo SINIKON Comfort Plus Double branch fitting 87°, PP, d - 110*110*50 [Code number: 506012.K] Draft SINIKON Comfort Plus Double branch fitting 87°, PP, d - 110*110*50 [Code number: 506012.K]
SINIKON Comfort Plus Double branch fitting 87°, PP, d - 110*110*50 [Code number: 506012.K]
Details 		506012.K 858 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Reinforced fitting with increased wall thickness.

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d d2 d3 Angle Wall thickness Colour
mm mm mm   mm  
110 110 50 87° 3,4 white
Photo Draft
Photo SINIKON Standart Double branch fitting 87°, PP, d - 110*110*50 [Code number: 506012.R] Draft SINIKON Standart Double branch fitting 87°, PP, d - 110*110*50 [Code number: 506012.R]
SINIKON Standart Double branch fitting 87°, PP, d - 110*110*50 [Code number: 506012.R]
Details 		506012.R 612 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 d2 Angle Weight Colour
mm mm mm   kg  
110 110 50 87° 0,505 Gray
Photo Draft
Photo SINIKON Standart Double branch fitting 67°, PP, d - 110*110*110 [Code number: 506013] Draft SINIKON Standart Double branch fitting 67°, PP, d - 110*110*110 [Code number: 506013]
SINIKON Standart Double branch fitting 67°, PP, d - 110*110*110 [Code number: 506013]
Details 		506013 722 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 d2 Angle Weight Colour
mm mm mm   kg  
110 110 110 67° 0,430 Gray
Photo Draft
Photo SINIKON Comfort Plus Double branch fitting 87°, PP, d - 110*110*110 [Code number: 506015.K] Draft SINIKON Comfort Plus Double branch fitting 87°, PP, d - 110*110*110 [Code number: 506015.K]
SINIKON Comfort Plus Double branch fitting 87°, PP, d - 110*110*110 [Code number: 506015.K]
Details 		506015.K 858 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Reinforced fitting with increased wall thickness.

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d d2 d3 Angle Wall thickness Colour
mm mm mm   mm  
110 110 110 87° 3,4 white
Photo Draft
Photo SINIKON Standart Double branch fitting 87°, PP, d - 110*110*110 [Code number: 506015.R] Draft SINIKON Standart Double branch fitting 87°, PP, d - 110*110*110 [Code number: 506015.R]
SINIKON Standart Double branch fitting 87°, PP, d - 110*110*110 [Code number: 506015.R]
Details 		506015.R 612 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 d2 Angle Weight Colour
mm mm mm   kg  
110 110 110 87° 0,505 Gray
Photo Draft
Photo SINIKON Comfort Plus Double branch fitting 45°, PP, d - 110х110х110 [Code number: 506016.K] Draft SINIKON Comfort Plus Double branch fitting 45°, PP, d - 110х110х110 [Code number: 506016.K]
SINIKON Comfort Plus Double branch fitting 45°, PP, d - 110х110х110 [Code number: 506016.K]
Details 		506016.K 858 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 10 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d d2 d3 Angle Wall thickness Colour
mm mm mm   mm  
110 110 110 45° 2,7 white
Photo Draft
Photo SINIKON Standart Double branch fitting 45°, PP, d - 110*110*110 [Code number: 506016.R] Draft SINIKON Standart Double branch fitting 45°, PP, d - 110*110*110 [Code number: 506016.R]
SINIKON Standart Double branch fitting 45°, PP, d - 110*110*110 [Code number: 506016.R]
Details 		506016.R 612 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 d2 Angle Colour
mm mm mm    
110 110 110 45° Gray
Photo Draft
Photo SINIKON Standart Corner branch fitting 67°, PP, d - 110*110*110 [Code number: 512001] Draft SINIKON Standart Corner branch fitting 67°, PP, d - 110*110*110 [Code number: 512001]
SINIKON Standart Corner branch fitting 67°, PP, d - 110*110*110 [Code number: 512001]
Details 		512001 1 163 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years

Rule for determining the execution (right or left) of two-plane crosses D110x110x50:

when holding the cross in the working position, with the socket up, and when the socket D110mm is directed towards you, the position of the socket D50mm on the right or left determines the execution of the cross.

d d1 d2 Angle Weight Colour
mm mm mm   kg  
110 110 110 67° 0,440 Gray
Photo Draft
Photo SINIKON Standart Corner branch fitting 67°, left, PP, d - 110*50*110 [Code number: 512003] Draft SINIKON Standart Corner branch fitting 67°, left, PP, d - 110*50*110 [Code number: 512003]
SINIKON Standart Corner branch fitting 67°, left, PP, d - 110*50*110 [Code number: 512003]
Details 		512003 3 014 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years

Rule for determining the execution (right or left) of two-plane crosses D110x110x50:

when holding the cross in the working position, with the socket up, and when the socket D110mm is directed towards you, the position of the socket D50mm on the right or left determines the execution of the cross.

d d1 d2 Angle Weight Colour
mm mm mm   kg  
110 50 110 67° 0,360 Gray
Photo Draft
Photo SINIKON Standart Corner branch fitting 67°, right, PP, d - 110*110*50 [Code number: 512005] Draft SINIKON Standart Corner branch fitting 67°, right, PP, d - 110*110*50 [Code number: 512005]
SINIKON Standart Corner branch fitting 67°, right, PP, d - 110*110*50 [Code number: 512005]
Details 		512005 3 014 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years

Rule for determining the execution (right or left) of two-plane crosses D110x110x50:

when holding the cross in the working position, with the socket up, and when the socket D110mm is directed towards you, the position of the socket D50mm on the right or left determines the execution of the cross.

d d1 d2 Angle Weight Colour
mm mm mm   kg  
110 110 50 67° 0,360 Gray
© Inrusstrade.ru 1999-2026. "Inrusstrade" Ltd. Copying and quoting is prohibited