Traps for domestic sewerage

Traps for domestic sewerage are divided into several types. So, in this group of products there are special traps for sanitary engineerings, in particular traps for bathtubs, sinks and washbasins, urinals, shower trays and shower trays, washing machines and dishwashers, as well as for air conditioners.

Additionally, traps which are made of high-density polyethylene (HDPE) with vertical and horizontal discharges are presented in this group. They differ in diameters (the diameters of traps vary from 50 to 110 mm) and form (there are P-shaped and S-shaped traps).

Also the group of products includes traps made of cast iron, which are distinguished by durability and non-inflammability. These traps are used when installing the SML system PAM-GLOBAL. There are special traps for stormwater among the cast-iron traps.

Photo Наименование Article Цена

Hutterer & Lechner Drain body "Wall Duo", horizontal, 2 x DN50 [Code number: HL 53K.2]

Details

HL 53K.2

52 052 rub

HL 53K.2 - drain body for flat slot shower channel. Guaranteed service life is 50 years (with correct operation of the device, in particular when draining liquids whose temperature does not exceed +100°C). The capacity of the trap is 1,45 l/s.

Diameter	Capacity	Load	Weight
DN, mm	l/s	kg	kg
2 x DN50	300	1,45	3.48

Material of spare parts

Trap cartridge	Body	Waterproofing sheet

polypropylene	polypropylene	Thermoplastic elastomer

Packaging data (carton)

Height	Width	Depth	Weight	Volume
mm	mm	mm	kg	m3
100	200	1115	3,48	0,022300000

Documentation

Download data sheet: Drain body kit HL 53K.2

Hutterer & Lechner Drain body InFloor CeraDrain, horizontal with polymere concrete collar, DN 50 [Code number: HL 53KC]

Details

HL 53KC

71 498 rub

HL 53KC - drain body for flat slot shower channel. Guaranteed service life is 50 years (with correct operation of the device, in particular when draining liquids whose temperature does not exceed +100°C). The capacity of the trap is 0,80 l/s.

Diameter	Capacity	Weight
DN, mm	l/s	kg
50	0.80	4,32

Material of spare parts

Trap cartridge	Body

polypropylene	polypropylene

Packaging data (carton)

Height	Width	Depth	Weight	Volume
mm	mm	mm	kg	m3
140	220	670	4,64	0,020636000

Documentation

Download data sheet: Drain body kit HL 53KFC

Hutterer & Lechner Drain body InFloor, DN40 [Code number: HL 53KF]

Details

HL 53KF

30 281 rub

Drain body InFloor, outlet DN40 horizontal, polypropylene, with ball-joint, adjustable 0-15 degrees.

Diameter	Capacity	Mounting height	Weight	Material
DN mm	mm	l/s	mm	kg
40	0,4	65	1,25	PP

Packaging data (carton)

Height	Width	Depth	Weight	Volume
mm	mm	mm	kg	m3
100	200	575	1,55	0,0115

Documentation

Download data sheet: Drain body kit HL 53KF

Hutterer & Lechner Drain body InFloor CeraDrain, horizontal, flat with polymere concrete collar, DN 40 [Code number: HL 53KFC]

Details

HL 53KFC

76 942 rub

HL 53KFC - drain body for flat slot shower channel. Guaranteed service life is 50 years (with correct operation of the device, in particular when draining liquids whose temperature does not exceed +100°C). The capacity of the trap is 0.40 l/s.

Diameter	Capacity	Load	Weight
DN, mm	l/s	kg	kg
40	300	0.40	4.62

Material of spare parts

Trap cartridge	Body

polypropylene	polypropylene

Packaging data (carton)

Height	Width	Depth	Weight	Volume
mm	mm	mm	kg	m3
140	220	670	4,62	0,020636000

Documentation

Download data sheet: Drain body kit HL 53KFC

Hutterer & Lechner Drain body InFloor, vertical, DN 50 [Code number: HL 53KV]

Details

HL 53KV

40 931 rub

HL 53KV - drain body for flat slot shower channel. Guaranteed service life is 50 years (with correct operation of the device, in particular when draining liquids whose temperature does not exceed +100°C). The capacity of the trap is 0,98 l/s.

Diameter	Capacity	Load	Weight
DN, mm	l/s	kg	kg
50	300	0,98	1,56

Material of spare parts

Trap cartridge	Body

polypropylene	polypropylene

Packaging data (carton)

Height	Width	Depth	Weight	Volume
mm	mm	mm	kg	m3
210	390	390	1,56	0,031941000

Documentation

Download data sheet: Drain body kit HL 53KV

Hutterer & Lechner waste and overflow assembly with ball-joint tub-trap, without visual parts, DN40/50 [Code number: HL 555N.0]

Details

HL 555N.0

9 169 rub

Purpose of use:

For bathtubs

Main characteristics:

has a siphon and a ball-joint tub-trap;
60 cm Bowden cable (material - stainless steel CrNi 18/10);
8-13 mm hose connection;
type of outlet - horizontal (outlet 280° rotation, 10° tilt).

Material of the body: polypropylene.

There is a new system for fixing the rotating handle, as well as a new toothed rack mechanism for precise movement. The overflow hose is flexible, the gasket for the drain plate is double.

Diameter	Capacity	Material	Weight
DN, mm	l/s		kg
40/50	0,67	polypropylene	0,733

Documentation

Download example of product installation: Waste and overflow assembly HL 555N.0

Hutterer & Lechner visual parts white for HL 555N [Code number: HL 555N.3]

Details

HL 555N.3

7 024 rub

Application purposes:

For waste and overflow assembly

Characteristics:

White color

Material: MS - beschichtet

Weight: 0,305 kg

Hutterer & Lechner visual parts gold plated for HL555N.0 and HL555N.L.0 [Code number: HL 555N.4]

Details

HL 555N.4

8 765 rub

Application purposes:

For waste and overflow assembly

Characteristics:

Gold-plated brass

Material: MS - beschichtet

Weight: 0,305 kg

Photo Hutterer & Lechner waste and overflow assembly with integrated water feed 3/4', ball-joint tub-trap, visual parts solid brass, DN40/50 [Code number: HL 560N.2]

Draft Hutterer & Lechner waste and overflow assembly with integrated water feed 3/4', ball-joint tub-trap, visual parts solid brass, DN40/50 [Code number: HL 560N.2]

Hutterer & Lechner waste and overflow assembly with integrated water feed 3/4', ball-joint tub-trap, visual parts solid brass, DN40/50 [Code number: HL 560N.2]

Details

HL 560N.2

46 484 rub

Application area:

For bath

Characteristics:

Material: PP (visible parts are made of brass)
Size: DN40/50
Has a ball joint
Equipped with Bowden cable (length: 60 cm) which is made of CrNi 18/10 steel
Outlet horizontal (outlet 280° swivel, 10° tilt)
Mounting height: 107 mm

Capacity: 0.67 l/s

Product weight: 2.34 kg

Documentation

Download example of product installation: Waste and overflow assembly HL 560N.2

Hutterer & Lechner waste and overflow assembly with integrated water feed 3/4', ball-joint tub-trap, visual parts white [Code number: HL 560N.3]

Details

HL 560N.3

43 301 rub

Application area:

For bath

Characteristics:

Material: PP (visible parts are made of brass and painted white)
Size: DN40/50
Has a ball joint
Equipped with Bowden cable (length: 60 cm)
Inlet type: horizontal (outlet 280° turn, 10° tilt)
There is a fitting that allows you to connect a drain tube

Capacity: 0.67 l/s.

Product weight: 2.34 kg.

Documentation

Download example of product installation: Waste and overflow assembly HL 560N.3

Hutterer & Lechner FlexBox - flat shower trap [Code number: HL 570]

Details

HL 570

23 664 rub

HL 570 - trap for flat shower tray with diameter 90 mm. Equipped with cover size d 113 mm. Horizontal outlet.

Diameter	Capacity	Load	Weight
DN, mm	l/s	kg	kg
40/50	300	0.50	1.607

Material of spare parts

Grate	Trap cartridge	Compression flange	Body

stainless steel	polypropylene	thermoplastic elastomer	polypropylene

Packaging data (carton)

Height	Width	Depth	Weight	Volume
mm	mm	mm	kg	m3
300	300	240	1,607	0,021600000

Documentation

Download data sheet: Flat shower trap HL 570

Download example of product installation: Flat shower trap HL 570

Branch trap PAM-GLOBAL® Plus

Details

Nominal internal diameter	I	H	X₁	X₂	X₃	X₄	W	Weight	Code number
DN								kg
50	190	250	182	68	122	68	60	2,90	155311
80	265	293	200	93	172	93	60	5,85	176739
100	325	392	282	110	215	110	100	9,50	155372
125	390	446	316	130	260	130	100	14,35	155404
150	470	493	348	145	325	145	100	21,75	155436
200	600	600	420	180	400	200	100	38,38	155464

Dimensions are presented in mm

1 2

Branch trap PAM-GLOBAL® S

Details

Branch traps PAM-GLOBAL^® S with nominal diameter of 50-200 mm can be mounted on a vertical and horizontal pipeline (the vertical pipeline must be fixed). The branch trap is installed vertically to maintain a sufficient depth of the water seal. The branch trap can be installed both to pipeline-collector and to pressure riser. On the branch trap body are printed arrows which are indicating the direction of flow.

Nominal internal diameter	I	h	X₁	X₂	X₃	X₄	W	Weight	Code number
DN								kg
50	190	250	182	68	122	68	60	2,9	156420
70*	265	293	200	93	172	93	60	5,0	156521
80	265	293	200	93	172	93	60	5,9	176714
100	325	392	282	110	215	110	100	9,5	156668
125	390	446	316	130	260	130	100	14,4	156801
150	470	493	348	145	325	145	100	21,8	156912
200	600	600	420	180	400	200	100	38,4	157018

Dimensions are presented in mm

*Diameter 80 gradually replace diameter 70

Installation examples:

Hutterer & Lechner Tubular trap with appliance hose connector and ball-joint outlet, DN40x1 1/2' [Code number: HL 100/40]

Details

HL 100/40

2 516 rub

Tubular trap HL 100/40 DN 40 horizontal is made of polypropylene. The device is equipped with ball-joint outlet and appliance hose connector 6/4". In addition, the trap can connect to the washing machine or dishwasher, which uses input 3/4".

Diameter	Material	Weight
DN, mm		gr
40	polypropylene	260

Documentation

Download data sheet: Tubular trap HL 100/40

Download example of product installation: Tubular trap HL 100/40

Hutterer & Lechner Wash-basin trap with rosette, DN32x1 1/4' [Code number: HL 132/30]

Details

HL 132/30

1 862 rub

HL 132/30 wash-basin trap DN32 x 1 1/4' horizontal is connected to a wash basin. It is made of polypropylene and has a weight is 180 grams. The wash-basin trap can connect to a dishwasher or washing machine, height of the dip tube is adjusted. HL 132/30 is equipped with a decorative rosette.

Diameter	Material	Weight
DN, mm		gr
32	polypropylene	180

Download data sheet: Wash-basin trap HL 132/30

Hutterer & Lechner Bath tub trap with ball-joint, DN40/50x1 1/2' [Code number: HL 500-6/4]

Details

HL 500-6/4

2 388 rub

Application area:

For bath

Characteristics:

Material: PP/PE
Dimension: DN40/50 x 6/4"
Capacity: 0,83 l/s
Installation height: 93 mm

Weight: 0,17 kg

Packaging data (PE-bag)

Height	Width	Depth	Weight	Volume
mm	mm	mm	kg	m3
80	100	252	0,176	0,002016000

Documentation

Download example of product installation: Bath tub trap HL 500-6/4

Photo PAM-GLOBAL® S Trap for rainwater systems

PAM-GLOBAL® S Trap for rainwater systems

Details

Nominal internal diameter	a	b	L1	L2	L3	Weight	Code number
DN	mm	mm	mm	mm	mm	kg
100	276	124	588	90	408	18,5	155841
150	374	179	742	110	522	38,0	155921

Hutterer & Lechner Tubular trap with appliance hose connector and ball-joint outlet, DN50x1 1/2' [Code number: HL 100/50]

Details

HL 100/50

2 516 rub

Tubular trap HL 100/50 DN 50 horizontal is made of polypropylen. The device is equipped with ball-joint outlet and appliance hose connector 6/4". In addition, the trap can connect to the washing machine or dishwasher, which uses input 3/4".

Diameter	Material	Weight
DN, mm		gr
50	polypropylene	265

Documentation

Download data sheet: Tubular trap HL 100/50

Download example of product installation: Tubular trap HL 100/50

Hutterer & Lechner Wash-basin trap with rosette, DN40x1 1/4' [Code number: HL 132/40]

Details

HL 132/40

1 862 rub

HL 132/40 wash-basin trap DN40 x 1 1/4' horizontal is connected to a wash basin. It is made of polypropylene and has a weight is 185 grams. The wash-basin trap can connect to a dishwasher or washing machine, height of the dip tube is adjusted. HL 132/40 is equipped with a decorative rosette.

Diameter	Material	Weight
DN, mm		gr
40	polypropylene	185

Download data sheet: Wash-basin trap HL 132/40

Hutterer & Lechner Bath tub trap, DN40/50x1 1/2' [Code number: HL 500N-6/4]

Details

HL 500N-6/4

1 734 rub

Application area:

For bath

Characteristics:

Material: PE
Size: 6/4"
Diameter: DN40/50
The height of the water seal of the siphon is 50 mm

Capacity: 0.52 l/s

Product weight: 0.14 kg