Traps for domestic sewerage

Floor drain body is made of polymer with sound disconnected adjusting screws, with fitting for grates, with fiber glass textile and removable sifon, with ball joint outlet DN50, adjustable 0-15° horizontal.

Application purpose:

• For waste disposal

Characteristics:

• the height of the shower tray is 79 mm;
• built into the mounting element, which is made of extruded polystyrene EPS-40 (size 1200x200x79 mm);
• there is a subframe (size 499x80x13 mm), as well as a grate (size 480x50 mm) made of stainless steel;
• the surface of the mounting casing is covered with Montaplast waterproofing sheet;
• suitable for wall mounting;
• the length is adjusted to the desired trimming (no more than 600 mm);
• element HL531V is used to extend the tray;
• the slope to the wall is 3°;
• it is possible to use wall tiles (thickness with tile adhesive no more than 17 mm) or floor tiles (thickness with tile adhesive no more than 28 mm);
• the drain is equipped with a dry siphon "Primus" (water seal height 25 mm);
• warranty period: 1 year;
• service life: 50 years.

Dimensions and components

Technical characteristics

Shower channel HL 531.0 is integrated in an EPS-installation block. Waterproof, fleece-laminated surface with 3% incline. For direct tiling. You can fine-tune of shower channel. Channel is equipped with PRIMUS-trap - this device allows you forget about the unpleasant smell of sewage. Another important advantage of the shower channel is its capacity - 0.6 l/s. For near-wall installation. Including lot cover, but without stainless steel cover.

Shower channel HL 531.0/18 is integrated in an EPS-installation block. It is also equipped with stainless steel frame, but without cover. Waterproof, fleece-laminated surface with 3% incline. For direct tiling. You can fine-tune of shower channel. Channel is equipped with PRIMUS-trap - this device allows you forget about the unpleasant smell of sewage. Another important advantage of the shower channel is its capacity - 0.6 l/s. For near-wall installation. Including lot cover..

Shower channel HL 531.0/23 is integrated in an EPS-installation block. It is also equipped with stainless steel frame, but without cover. Waterproof, fleece-laminated surface with 3% incline. For direct tiling. You can fine-tune of shower channel. Channel is equipped with PRIMUS-trap - this device allows you forget about the unpleasant smell of sewage. Another important advantage of the shower channel is its capacity - 0.6 l/s. For near-wall installation. Including lot cover..

Shower channel HL 531.0/28 is integrated in an EPS-installation block. It is also equipped with stainless steel frame, but without cover. Waterproof, fleece-laminated surface with 3% incline. For direct tiling. You can fine-tune of shower channel. Channel is equipped with PRIMUS-trap - this device allows you forget about the unpleasant smell of sewage. Another important advantage of the shower channel is its capacity - 0.6 l/s. For near-wall installation. Including lot cover..

Shower channel HL 531/18 is integrated in an EPS-installation block. It is also equipped with stainless steel frame. Waterproof, fleece-laminated surface with 3% incline. For direct tiling. You can fine-tune of shower channel. Channel is equipped with PRIMUS-trap - this device allows you forget about the unpleasant smell of sewage. Another important advantage of the shower channel is its capacity - 0.6 l/s. For near-wall installation. Including lot cover..

Shower channel HL 531/23 is integrated in an EPS-installation block. It is also equipped with stainless steel frame. Waterproof, fleece-laminated surface with 3% incline. For direct tiling. You can fine-tune of shower channel. Channel is equipped with PRIMUS-trap - this device allows you forget about the unpleasant smell of sewage. Another important advantage of the shower channel is its capacity - 0.6 l/s. For near-wall installation. Including lot cover..

Shower channel HL 531/28 is integrated in an EPS-installation block. It is also equipped with stainless steel frame. Waterproof, fleece-laminated surface with 3% incline. For direct tiling. You can fine-tune of shower channel. Channel is equipped with PRIMUS-trap - this device allows you forget about the unpleasant smell of sewage. Another important advantage of the shower channel is its capacity - 0.6 l/s. For near-wall installation. Including lot cover..

Application area:

• For barriere-free showers

Characteristics:

• Material: EPS - 20
• Dimension: 1200 x 185 mm
• installation height: 20 mm

Weight: 0,196 kg

Drain body InFloor, outlet DN50 horizontal, polypropylene, with ball-joint, adjustable 0-15 degrees.

Drain body InFloor, outlet DN40 horizontal, polypropylene, with ball-joint, adjustable 0-15 degrees.

HL 555N.0 waste and overflow assembly is equipped with ball-joint tub-trap DN40/50. It is designed for baths. It is equipped with a Bowden cable 60 cm wich is made of stainless steel (CrNi 18/10). The outlet is horizontal. There is new handle fixing system for accurate and screwless installation. It is made of polypropylene.

Application purposes:

• For waste and overflow assembly

Characteristics:

• White color

Material: MS - beschichtet

Weight: 0,305 kg

Application purposes:

• For waste and overflow assembly

Characteristics:

• Gold-plated brass

Material: MS - beschichtet

Weight: 0,305 kg