Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Lenin Hills

Pipe crosses for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage→ Pipe crosses for domestic sewerage

Crosses for internal sewage are designed to connect several pipes (usually from two to four). Usually they are mounted in nodes, that is, the most inaccessible places in the event of a breakdown or leakage.

They are divided into several types:

  • single-plane;
  • two-plane;
  • one-sided (with parallel outlets);
  • three-plane;
  • four-plane.

As a rule, the angle between the socket and the riser is 45 ° or 90 ° - such angles contribute to good drainage flow and reduce the likelihood of blockage.

Photo Наименование Article Цена
Photo Draft
Photo Geberit Silent-PP Combined branch fitting 87,5°, left, d 110, d1 90, d2 50 [Code number: 390.570.14.1] Photo Geberit Silent-PP Combined branch fitting 87,5°, left, d 110, d1 90, d2 50 [Code number: 390.570.14.1] Draft Geberit Silent-PP Combined branch fitting 87,5°, left, d 110, d1 90, d2 50 [Code number: 390.570.14.1]
Geberit Silent-PP Combined branch fitting 87,5°, left, d 110, d1 90, d2 50 [Code number: 390.570.14.1]
Details 		390.570.14.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For buried discharge pipes within building structures
  • For draining off waste water within buildings
  • For connecting low-lying drains on shower elements

Characteristics:

  • Acoustically optimised
  • Swept entry
  • Seal made of EPDM

Material: PP-MD

Installation temperature: -10 - +40 °C

Thermal expansion: 0.08 mm/(m · K)

d d1 d2 H Z1 Z2 Z3 Z4 Z5
mm mm mm cm cm cm cm cm cm
110 90 50 32.4 3.3 11.1 5.4 5.9 7.8
Photo Draft
Photo Geberit Silent-PP Combined branch fitting 87,5°, left, d 110, d1 110, d2 50 [Code number: 390.578.14.1] Photo Geberit Silent-PP Combined branch fitting 87,5°, left, d 110, d1 110, d2 50 [Code number: 390.578.14.1] Draft Geberit Silent-PP Combined branch fitting 87,5°, left, d 110, d1 110, d2 50 [Code number: 390.578.14.1]
Geberit Silent-PP Combined branch fitting 87,5°, left, d 110, d1 110, d2 50 [Code number: 390.578.14.1]
Details 		390.578.14.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For buried discharge pipes within building structures
  • For draining off waste water within buildings
  • For connecting low-lying drains on shower elements

Characteristics:

  • Acoustically optimised
  • Swept entry
  • Seal made of EPDM

Material: PP-MD

Installation temperature: -10 - +40 °C

Thermal expansion: 0.08 mm/(m · K)

d d1 d2 H Z1 Z2 Z3 Z4 Z5
mm mm mm cm cm cm cm cm cm
110 110 50 35 3.3 12.6 6.5 5.9 7.4
Photo Draft
Photo Geberit Silent-PP double branch fitting 87,5°, d 125*110*110 [Code number: 390.662.14.1] Draft Geberit Silent-PP double branch fitting 87,5°, d 125*110*110 [Code number: 390.662.14.1]
Geberit Silent-PP double branch fitting 87,5°, d 125*110*110 [Code number: 390.662.14.1]
Details 		390.662.14.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For domestic drainage systems

Scope of delivery:

  • O-ring made of EPDM

Material: PP-MD

Thermal expansion: 0,08 mm/(m*K)

d d1 d2 elbow H Z1 Z2 Z3
mm mm mm   cm cm cm cm
125 110 110 90° 21,3 6,6 7,8 7,3
Photo Draft
Photo Geberit Silent-PP corner branch fitting 87,5°, d 125*110 [Code number: 390.665.14.1] Draft Geberit Silent-PP corner branch fitting 87,5°, d 125*110 [Code number: 390.665.14.1]
Geberit Silent-PP corner branch fitting 87,5°, d 125*110 [Code number: 390.665.14.1]
Details 		390.665.14.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For domestic drainage systems
  • Not suitable for outdoor drainage systems
  • For non-pressure sewage systems
  • Not suitable for siphon and gravity systems rainwaters
  • Pipe is painted in blind black on the outside and inside - in white. Fittings are painted in black blind color

Scope of delivery:

  • O-ring made of EPDM

Material: PP-MD

Thermal expansion: 0,08 mm/(m*K)

d d1 elbow H Z1 Z2 Z3
mm mm   cm cm cm cm
125 110 180° 21,3 6,6 7,8 7,3
Photo
Photo RTP BETA ELITE Corner branch 87°, d - 110, d1 - 110, d2 - 50, d3 - 50, MPP, socket connection, white (l+r) [Code number: 43127]
RTP BETA ELITE Corner branch 87°, d - 110, d1 - 110, d2 - 50, d3 - 50, MPP, socket connection, white (l+r) [Code number: 43127]
Details 		43127 (RTP) 757 rub
Photo Draft
Photo (REPLACEMENT: 506000.R) - SINIKON Standart Double branch fitting 45°, PP, PP, d - 50*50*50 [Code number: 506000.E] Draft (REPLACEMENT: 506000.R) - SINIKON Standart Double branch fitting 45°, PP, PP, d - 50*50*50 [Code number: 506000.E]
(REPLACEMENT: 506000.R) - SINIKON Standart Double branch fitting 45°, PP, PP, d - 50*50*50 [Code number: 506000.E]
Details 		506000.E

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 d2 Angle Colour
mm mm mm    
50 50 50 45° Gray
Photo Draft
Photo SINICON Comfort Plus Double branch 45°, d - 50, d1 - 50, d2 - 50 [Code number: 506000.K] Draft SINICON Comfort Plus Double branch 45°, d - 50, d1 - 50, d2 - 50 [Code number: 506000.K]
SINICON Comfort Plus Double branch 45°, d - 50, d1 - 50, d2 - 50 [Code number: 506000.K]
Details 		506000.K 341 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements
  • For branching the pipeline

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

D D1 D2 Angle Colour
mm mm mm    
50 50 50 45° white
Photo Draft
Photo SINIKON Standart Double branch fitting 45°, PP, PP, d - 50x50x50 [Code number: 506000.R] Draft SINIKON Standart Double branch fitting 45°, PP, PP, d - 50x50x50 [Code number: 506000.R]
SINIKON Standart Double branch fitting 45°, PP, PP, d - 50x50x50 [Code number: 506000.R]
Details 		506000.R 244 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 d2 Angle Colour
mm mm mm    
50 50 50 45˚ Gray
Photo Draft
Photo SINIKON Standart Double branch fitting 67°, PP, d - 50*50*50 [Code number: 506001] Draft SINIKON Standart Double branch fitting 67°, PP, d - 50*50*50 [Code number: 506001]
SINIKON Standart Double branch fitting 67°, PP, d - 50*50*50 [Code number: 506001]
Details 		506001 966 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 d2 Angle Weight Colour
mm mm mm   kg  
50 50 50 67° 0,135 Gray
Photo Draft
Photo (REPLACEMENT: 506003.R) - SINIKON Standart Double branch fitting 87°, PP, PP, d - 50*50*50 [Code number: 506003.E] Draft (REPLACEMENT: 506003.R) - SINIKON Standart Double branch fitting 87°, PP, PP, d - 50*50*50 [Code number: 506003.E]
(REPLACEMENT: 506003.R) - SINIKON Standart Double branch fitting 87°, PP, PP, d - 50*50*50 [Code number: 506003.E]
Details 		506003.E

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 d2 Angle Colour
mm mm mm    
50 50 50 87° Gray
Photo Draft
Photo SINICON Comfort Plus Double branch 87°, d - 50, d1 - 50, d2 - 50 [Code number: 506003.K] Draft SINICON Comfort Plus Double branch 87°, d - 50, d1 - 50, d2 - 50 [Code number: 506003.K]
SINICON Comfort Plus Double branch 87°, d - 50, d1 - 50, d2 - 50 [Code number: 506003.K]
Details 		506003.K 341 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements
  • For branching the pipeline

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

D D1 D2 Angle Colour
mm mm mm    
50 50 50 87° white
Photo Draft
Photo SINIKON Standart Double branch fitting 87°, PP, PP, d - 50x50x50 [Code number: 506003.R] Draft SINIKON Standart Double branch fitting 87°, PP, PP, d - 50x50x50 [Code number: 506003.R]
SINIKON Standart Double branch fitting 87°, PP, PP, d - 50x50x50 [Code number: 506003.R]
Details 		506003.R 244 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 d2 Angle Colour
mm mm mm    
50 50 50 87˚ Gray
Photo Draft
Photo SINIKON Comfort Plus Double branch fitting 45°, d - 110, d1 - 50, d2 - 50 [Code number: 506008.K] Draft SINIKON Comfort Plus Double branch fitting 45°, d - 110, d1 - 50, d2 - 50 [Code number: 506008.K]
SINIKON Comfort Plus Double branch fitting 45°, d - 110, d1 - 50, d2 - 50 [Code number: 506008.K]
Details 		506008.K 698 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Connection type: socket. Installation does not require the use of special tools.

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years (subject to manufacturer's recommendations)

Technical specifications

D D1 D2 Angle Colour
mm mm mm    
110 50 50 45° white
Photo Draft
Photo SINIKON Standart Double branch fitting 45°, PP, d - 110*50*50 [Code number: 506008.R] Draft SINIKON Standart Double branch fitting 45°, PP, d - 110*50*50 [Code number: 506008.R]
SINIKON Standart Double branch fitting 45°, PP, d - 110*50*50 [Code number: 506008.R]
Details 		506008.R 498 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 d2 Angle Colour
mm mm mm    
110 50 50 45° Gray
Photo Draft
Photo SINIKON Standart Double branch fitting 67°, PP, d - 110*50*50 [Code number: 506009] Draft SINIKON Standart Double branch fitting 67°, PP, d - 110*50*50 [Code number: 506009]
SINIKON Standart Double branch fitting 67°, PP, d - 110*50*50 [Code number: 506009]
Details 		506009 498 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 d2 Angle Weight Colour
mm mm mm   kg  
110 50 50 67° 0,230 Gray
Photo Draft
Photo SINIKON Comfort Plus Double branch fitting 87°, PP, d - 110*50*50 [Code number: 506011.K] Draft SINIKON Comfort Plus Double branch fitting 87°, PP, d - 110*50*50 [Code number: 506011.K]
SINIKON Comfort Plus Double branch fitting 87°, PP, d - 110*50*50 [Code number: 506011.K]
Details 		506011.K 697 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d d2 d3 Angle Wall thickness Colour
mm mm mm   mm  
110 50 50 87° 2,7 white
Photo Draft
Photo SINIKON Standart Double branch fitting 87°, PP, d - 110*50*50 [Code number: 506011.R] Draft SINIKON Standart Double branch fitting 87°, PP, d - 110*50*50 [Code number: 506011.R]
SINIKON Standart Double branch fitting 87°, PP, d - 110*50*50 [Code number: 506011.R]
Details 		506011.R 498 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 d2 Angle Weight Colour
mm mm mm   kg  
110 50 50 87° 0,250 Gray
Photo Draft
Photo SINIKON Comfort Plus Double branch fitting 87°, PP, d - 110*110*50 [Code number: 506012.K] Draft SINIKON Comfort Plus Double branch fitting 87°, PP, d - 110*110*50 [Code number: 506012.K]
SINIKON Comfort Plus Double branch fitting 87°, PP, d - 110*110*50 [Code number: 506012.K]
Details 		506012.K 781 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Reinforced fitting with increased wall thickness.

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d d2 d3 Angle Wall thickness Colour
mm mm mm   mm  
110 110 50 87° 3,4 white
Photo Draft
Photo SINIKON Standart Double branch fitting 87°, PP, d - 110*110*50 [Code number: 506012.R] Draft SINIKON Standart Double branch fitting 87°, PP, d - 110*110*50 [Code number: 506012.R]
SINIKON Standart Double branch fitting 87°, PP, d - 110*110*50 [Code number: 506012.R]
Details 		506012.R 557 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 d2 Angle Weight Colour
mm mm mm   kg  
110 110 50 87° 0,505 Gray
Photo Draft
Photo SINIKON Standart Double branch fitting 67°, PP, d - 110*110*110 [Code number: 506013] Draft SINIKON Standart Double branch fitting 67°, PP, d - 110*110*110 [Code number: 506013]
SINIKON Standart Double branch fitting 67°, PP, d - 110*110*110 [Code number: 506013]
Details 		506013 646 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 d2 Angle Weight Colour
mm mm mm   kg  
110 110 110 67° 0,430 Gray
© Inrusstrade.ru 1999-2025. "Inrusstrade" Ltd. Copying and quoting is prohibited