Plumbing traps

Urinal trap HL 130/40 with outlet DN40 horizontal. It is made of polypropylene and is intended for connection to urinals and bidet. Capacity is 0.7 l/s. Height of dip tube can be adjusted.

Condensate trap HL 136.2 is made of polypropylene. The trap is manufactured by the Hutterer Lechner Company, preferably for air conditioners etc. Height of water seal is 140-320 mm. Dip-tubes is made of transparent material that you allows to monitor status of the water seal. Condensate trap can be connected to a washing machine or dishwasher. With a non return valve. With horizontal inlet DN40 and locking nut 6/4". Weight of the trap is 364 gramms.

Download data sheet: Condensate trap HL 136.2

Condensate trap HL 136.3 is made of polypropylene. Capacity is 0,37 l/s. The trap is manufactured by the Hutterer Lechner Company, preferably for air conditioners etc. With a trap seal, rising ball backwater stop and cleaning eye/tray. With DN40 and vertical inlet 1 1/4'. Weight of the trap is 230 gramms.

Download data sheet: Condensate trap HL 136.3

Application purpose:

• For draining condensate from air conditioners, fan coil units and air handling units

Characteristics:

• there is a mechanical odor locking device;
• there is a water seal (height 60 mm);
• entrance horizontal or vertical;
• release type: horizontal;
• throughput: 0.37 l / s;
• operation is possible at temperatures from 0°С to +100°С;
• warranty period: 1 year;
• service life: 50 years.

Equipment:

• body;
• sealing nut (size 5/4");
• cleaning;
• elbow with a diameter of 32 mm.

Produced in Russia.

Mounting example

Technical characteristics

Documentation

Download data sheet: Condensate trap HL 136N

Transparent condensate trap HL 136NT is made of PP transpartent. The trap is manufactured by the Hutterer Lechner Company, preferably for air conditioners, funnels etc. With a water trap seal (60 mm), rising ball backwater stop and cleaning eye/tray. Weight of the trap is 230 gramms.

Download data sheet: Transparent condensate trap HL 136NT

Application purpose:

• For drainage from air conditioners

Characteristics:

• there is a mechanical odor locking device;
• there is a water seal (height 50 mm);
• the size of the siphon intake hole is 20-32 mm;
• mounted at a vertical distance of at least 200 mm (but not more than 3.5 m) from the outlet pipe of the air conditioner;
• warranty period: 1 year;
• service life: 50 years.

Equipment:

• case (made of PP, equipped with a sealing rubber nozzle) 100x100x60 mm in size;
• removable transparent cassette;
• red construction plug (made of PP) that can be cut to size;
• white decorative cover measuring 110x110 mm (there are spring clips for fastening);
• instruction.

Produced in Russia.

Mounting example

Download example of use: In-wall siphon HL 138

In-wall siphon for diversion of drainage water to sewer system. It is suitable for technological (production) equipment, air conditioners, fancoils and other equipments with jet break which are installed in public health institutions and public catering. It does not miss odors when water seal dries up, the siphon-cassette is taken out. The inlet pipe connection is DN 20-32 mm (inner diameter is 18 mm). Mounting protection is cut in place. The minimum depth of installation is 60 mm.

Download data sheet: In-wall siphon HL 138H

HL 14/90 is a waste outlet for kitchen sinks. Connection - 6/4" thread.

Recessed washing device trap HL 400 is equipped with a check valve, stainless steel coverplate 160 x 110 mm and cleaning eye. Minimum installation depth 58 mm. Capacity is 0.38 l/s.

Application purposes:

• For HL 4000.0 corpus

Dimension: DN 40/50

Material: PP

Weight: 0,244 kg

Application purposes:

• For washing device siphon HL 4000.0 corpus

Equipment:

• HL 04000.1
• HL 04000.4E
• HL 04000.5E
• HL 19

Material: PP

Weight: 0,265 kg

Application purposes:

• For HL 4000.0 corpus for single washbasin connection

Equipment:

• HL 04000.2
• HL 04000.7E
• HL 04000.5E - 2 pc
• HL 19.2
• HL 19 - 2 pc

Material: PP

Weight: 0,35 kg

Application purposes:

• For HL 4000.0 corpus

Equipment:

• HL 04000.8
• HL 01111D
• HL 04000.9E

Material: PP/Edelstahl

Dimension: DN32

Capacity: 0,6 l/s

Grate: 120 x 166 mm

Weight: 0,22 kg

Recessed washing device trap HL 400ECO is equipped with a check valve and cleaning eye. Minimum installation depth 60 mm. Capacity is 0.38 l/s.

Characteristics of HL sewage equipment:

• Complies with ISO 9001
• Safety for ecology and health
• Products undergo laboratory testing
• Durability
• Attractive appearance

Recessed washing device trap HL 404.1 is equipped with a check valve abd stainless steel coverplate 110 x 225 mm. Minimum installation depth 65 mm. It works with air admittance valve HL902. Capacity is 0.38 l/s.

Download data sheet: Recessed washing device trap HL 404.1

Recessed washing device trap HL 405 is equipped with a stainless steel coverplate 180 x 100 mm and water feed 1/2'. Minimum installation depth 75 mm. Capacity is 0.38 l/s.

Download examples of mounting the product: Trap HL 405

Characteristics of HL sewage equipment:

• Complies with ISO 9001
• Safety for ecology and health
• Products undergo laboratory testing
• Durability
• Attractive appearance

Recessed washing device trap HL 405E is equipped with water feed 1/2' and stainless steel coverplate 190 x 100 mm. Minimum installation depth 75 mm. Comes with appliance hose connector 3/4' chrome plated HL19.C. Capacity is 0.38 l/s.

Download examples of mounting the product: Trap HL 405E