Logo
Ru| En

Sinicon bends

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage→ Bends for domestic sewerage→ Sinicon bends

Sinicon bend is designed for connecting pipes and fittings and simultaneously changing the direction of the pipeline. Sinicon bends are divided into several systems, the main characteristics of which are given in the table below:

 

  Standart Comfort Universal
Colour Gray metallic White Brown
Application purpose Domestic drainage Domestic drainage Domestic/Outdoor drainage
Mounting type Socket type Socket type Socket type
Seal Two-lobe seal of soft styrene-butadiene rubber (SBR 40 ± 5 IRHD) with plastic spacer ring Two-lobe seal of soft styrene butadiene rubber (SBR 40 ± 5 IRHD) with spacer ring Single-leaf seal of SBR rubber (styrene-butadiene-rubber)
Maximum operating temperature, °С +95 +95 +95
Diameter of connection, mm 32-110 50-110 110

 

The main advantages of polypropylene bends:

  • Tightness of joint;
  • Resistant to sudden temperature changes;
  • Compliance with hygienic requirements;
  • Resistance to corrosion and most chemicals;
  • Ease of installation;
  • Environmental safety;
  • Long service life - not less than 50 years.

The price for Sinicon bends is listed in our catalog - to see the products, go to one of the links:

Photo Name Article Price
Photo Draft
Photo (ITEM REPLACED BY Kolano 32/15) - SINIKON Standart Bend 15°, PP, d - 32 (Certus) [Code number: 504001CR] Draft (ITEM REPLACED BY Kolano 32/15) - SINIKON Standart Bend 15°, PP, d - 32 (Certus) [Code number: 504001CR]
(ITEM REPLACED BY Kolano 32/15) - SINIKON Standart Bend 15°, PP, d - 32 (Certus) [Code number: 504001CR]
Details 		504001CR

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: PP-H polypropylene.

Material density: 0.9-0.95 g/cm3.

Maximum operating temperature: +80 °C (short-term up to +95 °C).

Melting point: +160 °С.

Main advantages of the SINIKON Standard system:

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Colour
mm    
32 15˚ Metallic grey
Photo Draft
Photo (REPLACEMENT: 504001CR) - SINIKON Standart Bend 15°, PP, d - 32 [Code number: 504001.R] Draft (REPLACEMENT: 504001CR) - SINIKON Standart Bend 15°, PP, d - 32 [Code number: 504001.R]
(REPLACEMENT: 504001CR) - SINIKON Standart Bend 15°, PP, d - 32 [Code number: 504001.R]
Details 		504001.R
REPLACEMENT: 504001CR

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Weight Colour
mm   kg  
32 15° 0,020 Gray
Photo Draft
Photo SINIKON Standart Bend 30°, PP, d - 32 (Certus) [Code number: 504003CR] Draft SINIKON Standart Bend 30°, PP, d - 32 (Certus) [Code number: 504003CR]
SINIKON Standart Bend 30°, PP, d - 32 (Certus) [Code number: 504003CR]
Details 		504003CR 115 rub

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: PP-H polypropylene.

Material density: 0.9-0.95 g/cm3.

Maximum operating temperature: +80 °C (short-term up to +95 °C).

Melting point: +160 °С.

Main advantages of the SINIKON Standard system:

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Colour
mm    
32 30˚ Metallic grey
Photo Draft
Photo (ARTICLE REPLACEMENT: 504003CR) - SINIKON Standart Bend 30°, PP, d - 32 [Code number: 504003.R] Draft (ARTICLE REPLACEMENT: 504003CR) - SINIKON Standart Bend 30°, PP, d - 32 [Code number: 504003.R]
(ARTICLE REPLACEMENT: 504003CR) - SINIKON Standart Bend 30°, PP, d - 32 [Code number: 504003.R]
Details 		504003.R
ARTICLE REPLACEMENT: 504003CR

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Weight Colour
mm   kg  
32 30° 0,020 Gray
Photo Draft
Photo SINIKON Standart Bend 45°, PP, d - 32 [Code number: 504005.R] Draft SINIKON Standart Bend 45°, PP, d - 32 [Code number: 504005.R]
SINIKON Standart Bend 45°, PP, d - 32 [Code number: 504005.R]
Details 		504005.R 44 rub

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Weight Colour
mm   kg  
32 45° 0,020 Gray
Photo Draft
Photo SINIKON Standart Bend 67°, PP, d - 32 (Certus) [Code number: 504007CR] Draft SINIKON Standart Bend 67°, PP, d - 32 (Certus) [Code number: 504007CR]
SINIKON Standart Bend 67°, PP, d - 32 (Certus) [Code number: 504007CR]
Details 		504007CR 170 rub

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: PP-H polypropylene.

Material density: 0.9-0.95 g/cm3.

Maximum operating temperature: +80 °C (short-term up to +95 °C).

Melting point: +160 °С.

Main advantages of the SINIKON Standard system:

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Colour
mm    
32 67˚ Metallic grey
Photo Draft
Photo (ARTICLE REPLACEMENT: 504007CR] -SINIKON Standart Bend 67°, PP, d - 32 [Code number: 504007.R] Draft (ARTICLE REPLACEMENT: 504007CR] -SINIKON Standart Bend 67°, PP, d - 32 [Code number: 504007.R]
(ARTICLE REPLACEMENT: 504007CR] -SINIKON Standart Bend 67°, PP, d - 32 [Code number: 504007.R]
Details 		504007.R
ARTICLE REPLACEMENT: 504007CR

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Weight Colour
mm   kg  
32 67° 0,025 Gray
Photo Draft
Photo SINIKON Standart Bend 87°, PP, d - 32 [Code number: 504011.R] Draft SINIKON Standart Bend 87°, PP, d - 32 [Code number: 504011.R]
SINIKON Standart Bend 87°, PP, d - 32 [Code number: 504011.R]
Details 		504011.R 44 rub

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Weight Colour
mm   kg  
32 87° 0,025 Gray
Photo Draft
Photo (ARTICLE AMENDED BY 504013.R) - SINIKON Standart Bend 15°, d - 40 [Code number: 504013.G] Draft (ARTICLE AMENDED BY 504013.R) - SINIKON Standart Bend 15°, d - 40 [Code number: 504013.G]
(ARTICLE AMENDED BY 504013.R) - SINIKON Standart Bend 15°, d - 40 [Code number: 504013.G]
Details 		504013.G

ARTICLE AMENDED BY 504013.R

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Colour
mm    
40 15˚ Gray
Photo Draft
Photo SINIKON Comfort Plus Bend 15°, d - 40 [Code number: 504013.K] Draft SINIKON Comfort Plus Bend 15°, d - 40 [Code number: 504013.K]
SINIKON Comfort Plus Bend 15°, d - 40 [Code number: 504013.K]
Details 		504013.K 62 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d Angle Wall thickness Colour
mm   mm  
40 15° 2,7 white
Photo Draft
Photo SINIKON Standart Bend 15°, PP, d - 40 [Code number: 504013.R] Draft SINIKON Standart Bend 15°, PP, d - 40 [Code number: 504013.R]
SINIKON Standart Bend 15°, PP, d - 40 [Code number: 504013.R]
Details 		504013.R 44 rub

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Weight Colour
mm   kg  
40 15° 0,030 Gray
Photo Draft
Photo SINIKON Standart Bend 30°, PP, d - 40 (Certus) [Code number: 504015CR] Draft SINIKON Standart Bend 30°, PP, d - 40 (Certus) [Code number: 504015CR]
SINIKON Standart Bend 30°, PP, d - 40 (Certus) [Code number: 504015CR]
Details 		504015CR 126 rub

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: PP-H polypropylene.

Material density: 0.9-0.95 g/cm3.

Maximum operating temperature: +80 °C (short-term up to +95 °C).

Melting point: +160 °С.

Main advantages of the SINIKON Standard system:

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Colour
mm    
40 30˚ Metallic grey
Photo Draft
Photo SINICON Comfort Plus Bend 30°, d - 40, PP [Code number: 504015.K] Draft SINICON Comfort Plus Bend 30°, d - 40, PP [Code number: 504015.K]
SINICON Comfort Plus Bend 30°, d - 40, PP [Code number: 504015.K]
Details 		504015.K 62 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d Angle Wall thickness Colour
mm   mm  
40 30° 2,7 white
Photo Draft
Photo (ARTICLE REPLACEMENT: 504015CR) - SINIKON Standart Bend 30°, PP, d - 40 [Code number: 504015.R] Draft (ARTICLE REPLACEMENT: 504015CR) - SINIKON Standart Bend 30°, PP, d - 40 [Code number: 504015.R]
(ARTICLE REPLACEMENT: 504015CR) - SINIKON Standart Bend 30°, PP, d - 40 [Code number: 504015.R]
Details 		504015.R 44 rub
ARTICLE REPLACEMENT: 504015CR

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Weight Colour
mm   kg  
40 30° 0,035 Gray
Photo Draft
Photo SINIKON Comfort Plus Bend 45°, PP, d - 40 [Code number: 504017.K] Draft SINIKON Comfort Plus Bend 45°, PP, d - 40 [Code number: 504017.K]
SINIKON Comfort Plus Bend 45°, PP, d - 40 [Code number: 504017.K]
Details 		504017.K 62 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d Angle Wall thickness Colour
mm   mm  
40 45° 2,7 white
Photo Draft
Photo SINIKON Standart Bend 45°, PP, d - 40 [Code number: 504017.R] Draft SINIKON Standart Bend 45°, PP, d - 40 [Code number: 504017.R]
SINIKON Standart Bend 45°, PP, d - 40 [Code number: 504017.R]
Details 		504017.R 44 rub

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Weight Colour
mm   kg  
40 45° 0,035 Gray
Photo Draft
Photo (ARTICLE AMENDED BY 504019.R) - SINIKON Отвод 67°, D40 [Code number: 504019.C] Draft (ARTICLE AMENDED BY 504019.R) - SINIKON Отвод 67°, D40 [Code number: 504019.C]
(ARTICLE AMENDED BY 504019.R) - SINIKON Отвод 67°, D40 [Code number: 504019.C]
Details 		504019.C
ARTICLE AMENDED BY 504019.R

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Colour
mm    
40 67˚ Gray
Photo Draft
Photo (ARTICLE AMENDED BY 504019.R) - SINIKON Standart Bend 67°, d - 40 [Code number: 504019.G] Draft (ARTICLE AMENDED BY 504019.R) - SINIKON Standart Bend 67°, d - 40 [Code number: 504019.G]
(ARTICLE AMENDED BY 504019.R) - SINIKON Standart Bend 67°, d - 40 [Code number: 504019.G]
Details 		504019.G

ARTICLE AMENDED BY 504019.R

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Colour
mm    
40 67˚ Gray
Photo Draft
Photo SINIKON Comfort Plus Bend 67°, d - 40 [Code number: 504019.K] Draft SINIKON Comfort Plus Bend 67°, d - 40 [Code number: 504019.K]
SINIKON Comfort Plus Bend 67°, d - 40 [Code number: 504019.K]
Details 		504019.K 62 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d Angle Wall thickness Colour
mm   mm  
40 67° 2,7 white
Photo Draft
Photo SINIKON Standart Bend 67°, PP, d - 40 [Code number: 504019.R] Draft SINIKON Standart Bend 67°, PP, d - 40 [Code number: 504019.R]
SINIKON Standart Bend 67°, PP, d - 40 [Code number: 504019.R]
Details 		504019.R 44 rub

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Weight Colour
mm   kg  
40 67° 0,035 Gray

© Inrusstrade.ru 1999-2024. "Inrusstrade" Ltd. Copying and quoting is prohibited