Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Lenin Hills

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Наименование Article Цена
Photo Draft
Photo Geberit HDPE Connection bend for trap 90°, d56, di50 [Code number: 363.080.16.1] Draft Geberit HDPE Connection bend for trap 90°, d56, di50 [Code number: 363.080.16.1]
Geberit HDPE Connection bend for trap 90°, d56, di50 [Code number: 363.080.16.1]
Details 		363.080.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant
  • Long leg

Material: PE-HD

d d1 di X1 X2
mm mm mm cm cm
56 56 50 7.5 10
Photo Draft
Photo Geberit HDPE Connection bend for trap 91.5°, d56, di44 [Code number: 363.083.16.1] Draft Geberit HDPE Connection bend for trap 91.5°, d56, di44 [Code number: 363.083.16.1]
Geberit HDPE Connection bend for trap 91.5°, d56, di44 [Code number: 363.083.16.1]
Details 		363.083.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant
  • Long leg

Material: PE-HD

d d1 di X1 X2
mm mm mm cm cm
56 50 44 7.5 10
Photo Draft
Photo Geberit HDPE Bend 88.5°, d56 [Code number: 363.088.16.1] Draft Geberit HDPE Bend 88.5°, d56 [Code number: 363.088.16.1]
Geberit HDPE Bend 88.5°, d56 [Code number: 363.088.16.1]
Details 		363.088.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant

Technical data

Material: PE-HD

d X K
mm cm cm
56 6.5 2
Photo Draft
Photo RTP BETA Bend 15° for non-pressure domestic sewage, for socket, PP, d - 32 [Code number: 36310] Draft RTP BETA Bend 15° for non-pressure domestic sewage, for socket, PP, d - 32 [Code number: 36310]
RTP BETA Bend 15° for non-pressure domestic sewage, for socket, PP, d - 32 [Code number: 36310]
Details 		36310
Photo Draft
Photo RTP BETA T-piece 67° for non-pressure domestic sewage, for socket, PP, d - 110, d1 - 110 [Code number: 36311] Draft RTP BETA T-piece 67° for non-pressure domestic sewage, for socket, PP, d - 110, d1 - 110 [Code number: 36311]
RTP BETA T-piece 67° for non-pressure domestic sewage, for socket, PP, d - 110, d1 - 110 [Code number: 36311]
Details 		36311
Photo Draft
Photo Geberit HDPE Y-branch fitting 135° (45°), d56, d1 50 [Code number: 363.112.16.1] Draft Geberit HDPE Y-branch fitting 135° (45°), d56, d1 50 [Code number: 363.112.16.1]
Geberit HDPE Y-branch fitting 135° (45°), d56, d1 50 [Code number: 363.112.16.1]
Details 		363.112.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 H X1 X2 X3 K1 K2 K3
mm mm cm cm cm cm cm cm cm
56 50 18 6 12 12 4 3 3
Photo Draft
Photo Geberit HDPE Y-branch fitting 135° (45°), d56, d1 56 [Code number: 363.115.16.1] Draft Geberit HDPE Y-branch fitting 135° (45°), d56, d1 56 [Code number: 363.115.16.1]
Geberit HDPE Y-branch fitting 135° (45°), d56, d1 56 [Code number: 363.115.16.1]
Details 		363.115.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 H X1 X2 X3 K1 K2 K3
mm mm cm cm cm cm cm cm cm
56 56 18 6 12 12 4 2.5 2.5
Photo Draft
Photo RTP BETA T-piece 45° for non-pressure domestic sewage, for socket, PP, d - 125 [Code number: 36312] Draft RTP BETA T-piece 45° for non-pressure domestic sewage, for socket, PP, d - 125 [Code number: 36312]
RTP BETA T-piece 45° for non-pressure domestic sewage, for socket, PP, d - 125 [Code number: 36312]
Details 		36312 (RTP) 1 622 rub
Photo Draft
Photo RTP BETA T-piece 67° for non-pressure domestic sewage, for socket, PP, d - 110, d1 - 50 [Code number: 36314] Draft RTP BETA T-piece 67° for non-pressure domestic sewage, for socket, PP, d - 110, d1 - 50 [Code number: 36314]
RTP BETA T-piece 67° for non-pressure domestic sewage, for socket, PP, d - 110, d1 - 50 [Code number: 36314]
Details 		36314 (RTP) 498 rub
Photo Draft
Photo RTP BETA Bend 87° for non-pressure domestic sewage, for socket, PP, d - 125 [Code number: 36315] Draft RTP BETA Bend 87° for non-pressure domestic sewage, for socket, PP, d - 125 [Code number: 36315]
RTP BETA Bend 87° for non-pressure domestic sewage, for socket, PP, d - 125 [Code number: 36315]
Details 		36315 (RTP) 640 rub
Photo Draft
Photo Geberit HDPE Branch fitting 91.5° (88,5°), d56, d1 50 [Code number: 363.162.16.1] Draft Geberit HDPE Branch fitting 91.5° (88,5°), d56, d1 50 [Code number: 363.162.16.1]
Geberit HDPE Branch fitting 91.5° (88,5°), d56, d1 50 [Code number: 363.162.16.1]
Details 		363.162.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For all drainage pipes

Characteristics

  • UV-resistant

Material: PE-HD

d d1 H X1 X2 X3 K1 K2 K3
mm mm cm cm cm cm cm cm cm
56 50 17.5 10.5 7 7 7 3 3.5
Photo Draft
Photo Geberit HDPE Branch fitting 91.5° (88,5°), d56, d1 56 [Code number: 363.165.16.1] Draft Geberit HDPE Branch fitting 91.5° (88,5°), d56, d1 56 [Code number: 363.165.16.1]
Geberit HDPE Branch fitting 91.5° (88,5°), d56, d1 56 [Code number: 363.165.16.1]
Details 		363.165.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For all drainage pipes

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 H X1 X2 X3 K1 K2 K3
mm mm cm cm cm cm cm cm cm
56 56 17.5 10.5 7 7 6.5 3 3
Photo Draft
Photo RTP BETA T-piece 87° for non-pressure domestic sewage, for socket, PP, d - 125 [Code number: 36317] Draft RTP BETA T-piece 87° for non-pressure domestic sewage, for socket, PP, d - 125 [Code number: 36317]
RTP BETA T-piece 87° for non-pressure domestic sewage, for socket, PP, d - 125 [Code number: 36317]
Details 		36317 (RTP) 1 192 rub
Photo Draft
Photo RTP BETA ORANGE Plug, PP-B, for outdoor sewage, with socket, d - 110 [Code number: 36324] Draft RTP BETA ORANGE Plug, PP-B, for outdoor sewage, with socket, d - 110 [Code number: 36324]
RTP BETA ORANGE Plug, PP-B, for outdoor sewage, with socket, d - 110 [Code number: 36324]
Details 		36324 (RTP) 87 rub
Photo Draft
Photo RTP BETA Plug for non-pressure domestic sewage, for socket, PP, d - 75 [Code number: 36325] Draft RTP BETA Plug for non-pressure domestic sewage, for socket, PP, d - 75 [Code number: 36325]
RTP BETA Plug for non-pressure domestic sewage, for socket, PP, d - 75 [Code number: 36325]
Details 		36325 (RTP) 44 rub
Photo Draft
Photo Geberit HDPE Double Y-branch fitting 60°, d56, d1 50 [Code number: 363.462.16.1] Draft Geberit HDPE Double Y-branch fitting 60°, d56, d1 50 [Code number: 363.462.16.1]
Geberit HDPE Double Y-branch fitting 60°, d56, d1 50 [Code number: 363.462.16.1]
Details 		363.462.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For all drainage pipes
  • For vertical installation

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 X1 X2 K1 K2
mm mm cm cm cm cm
56 50 6 12 4 5
Photo Draft
Photo Geberit HDPE Double Y-branch fitting 60°, d56, d1 56 [Code number: 363.465.16.1] Draft Geberit HDPE Double Y-branch fitting 60°, d56, d1 56 [Code number: 363.465.16.1]
Geberit HDPE Double Y-branch fitting 60°, d56, d1 56 [Code number: 363.465.16.1]
Details 		363.465.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For all drainage pipes
  • For vertical installation

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 X1 X2 K1 K2
mm mm cm cm cm cm
56 56 1.8 5.3 0 0
Photo Draft
Photo Geberit HDPE Connection bend double-Y-branch for traps, d56 [Code number: 363.472.16.1] Draft Geberit HDPE Connection bend double-Y-branch for traps, d56 [Code number: 363.472.16.1]
Geberit HDPE Connection bend double-Y-branch for traps, d56 [Code number: 363.472.16.1]
Details 		363.472.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For sleeves
  • For washbasins, urinals and bidets

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 A di H K
mm mm cm mm cm cm
56 50 15.5 44 12 3
Photo Draft
Photo Geberit HDPE Concentric reducer, d56, d1 48 [Code number: 363.510.16.1] Draft Geberit HDPE Concentric reducer, d56, d1 48 [Code number: 363.510.16.1]
Geberit HDPE Concentric reducer, d56, d1 48 [Code number: 363.510.16.1]
Details 		363.510.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For all drainage pipes

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 H h K
mm mm cm cm cm
56 48 4 – –
Photo Draft
Photo Geberit HDPE Short eccentric reducer, d56, d1 40 [Code number: 363.558.16.1] Draft Geberit HDPE Short eccentric reducer, d56, d1 40 [Code number: 363.558.16.1]
Geberit HDPE Short eccentric reducer, d56, d1 40 [Code number: 363.558.16.1]
Details 		363.558.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For all drainage pipes

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 A H h h1 K
mm mm cm cm cm cm cm
56 40 0.8 8 3.7 3.5 2
© Inrusstrade.ru 1999-2026. "Inrusstrade" Ltd. Copying and quoting is prohibited