Logo
Ru| En

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Name Article Price
Photo Draft
Photo Geberit HDPE Complete Screw-Threaded Joint, d56 [Code number: 363.740.16.1] Draft Geberit HDPE Complete Screw-Threaded Joint, d56 [Code number: 363.740.16.1]
Geberit HDPE Complete Screw-Threaded Joint, d56 [Code number: 363.740.16.1]
Details 		363.740.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant
  • Seal made of EPDM
  • Compression ring made of PP
  • Union nut made of PP

Scope of delivery:

  • Protective cap

Material: PE-HD

d Rg D H h h1 h2
mm " cm cm cm cm cm
56 70 x 1/6 8.5 6.8 3.5 5 2
Photo Draft
Photo Geberit HDPE loose flange, d56/63 [Code number: 363.745.00.1] Draft Geberit HDPE loose flange, d56/63 [Code number: 363.745.00.1]
Geberit HDPE loose flange, d56/63 [Code number: 363.745.00.1]
Details 		363.745.00.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For combining with Geberit HDPE weld-neck collars

Characteristics:

  • Plastic coated

Material: Steel

d D k m H n PN
mm cm cm cm cm Pc. bar
56 / 63 16.5 12.5 1.8 1.2 4 10
Photo Draft
Photo Geberit HDPE blind flange, d56/63 [Code number: 363.748.00.1] Draft Geberit HDPE blind flange, d56/63 [Code number: 363.748.00.1]
Geberit HDPE blind flange, d56/63 [Code number: 363.748.00.1]
Details 		363.748.00.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • Plastic coated

Material: Steel

d D k m H n PN
mm cm cm cm cm Pc. bar
56 / 63 16.5 12.5 1.8 1.2 4 10
Photo Draft
Photo Geberit HDPE Nut washer and seal, d56 [Code number: 363.749.16.1] Draft Geberit HDPE Nut washer and seal, d56 [Code number: 363.749.16.1]
Geberit HDPE Nut washer and seal, d56 [Code number: 363.749.16.1]
Details 		363.749.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Scope of delivery:

  • Union nut made of PP
  • Compression ring made of PP
  • Seal made of EPDM

Material: PE-HD

d Rg D H
mm " cm cm
56 70 x 1/6 8.5 6.8
Photo Draft
Photo Geberit HDPE Threaded connector with screw cap, d56 [Code number: 363.750.16.1] Draft Geberit HDPE Threaded connector with screw cap, d56 [Code number: 363.750.16.1]
Geberit HDPE Threaded connector with screw cap, d56 [Code number: 363.750.16.1]
Details 		363.750.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant
  • With seal made of EPDM
  • Screw cap made of PP

Material: PE-HD

d Rg D H h h1 h2
mm " cm cm cm cm cm
56 70 x 1/6 8.5 6.8 3.5 5 2
Photo Draft
Photo Geberit HDPE Flange bushing, d56 [Code number: 363.772.16.1] Draft Geberit HDPE Flange bushing, d56 [Code number: 363.772.16.1]
Geberit HDPE Flange bushing, d56 [Code number: 363.772.16.1]
Details 		363.772.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • For all drainage pipes

Characteristics:

  • UV-resistant

Material: PE-HD

d D H h
mm cm cm cm
56 6,5 5,8 2,7
Photo Draft
Photo Geberit HDPE Screw cap, d56 [Code number: 363.781.16.1] Draft Geberit HDPE Screw cap, d56 [Code number: 363.781.16.1]
Geberit HDPE Screw cap, d56 [Code number: 363.781.16.1]
Details 		363.781.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • With seal made of EPDM

Material: PP

d Rg D H
mm " cm cm
56 70 x 1/6 8.5 3.5
Photo Draft
Photo RTP BETA T-piece 87° for non-pressure domestic sewage, for socket, PP, d - 40, d1 - 40 [Code number: 36380] Draft RTP BETA T-piece 87° for non-pressure domestic sewage, for socket, PP, d - 40, d1 - 40 [Code number: 36380]
RTP BETA T-piece 87° for non-pressure domestic sewage, for socket, PP, d - 40, d1 - 40 [Code number: 36380]
Details 		36380 82 rub
Photo Draft
Photo Geberit HDPE Protective cap for pipe end, d56 [Code number: 363.802.92.1] Draft Geberit HDPE Protective cap for pipe end, d56 [Code number: 363.802.92.1]
Geberit HDPE Protective cap for pipe end, d56 [Code number: 363.802.92.1]
Details 		363.802.92.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For protecting pipe ends

Material: PE-LD

d D H Colour / Surface
mm cm cm  
56 5.8 3.5 yellow
Photo Draft
Photo RTP BETA T-piece 45° for gravity sewerage, for socket, PP, d - 40, d1 - 40 [Code number: 36381 (RTP)] Draft RTP BETA T-piece 45° for gravity sewerage, for socket, PP, d - 40, d1 - 40 [Code number: 36381 (RTP)]
RTP BETA T-piece 45° for gravity sewerage, for socket, PP, d - 40, d1 - 40 [Code number: 36381 (RTP)]
Details 		36381 82 rub
Photo
Photo Geberit HDPE Weld-on cap, d56 [Code number: 363.812.16.1]
Geberit HDPE Weld-on cap, d56 [Code number: 363.812.16.1]
Details 		363.812.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For butt welding

Characteristics:

  • UV-resistant

Material: PE-HD

d Colour / Surface
mm  
56 black
Photo Draft
Photo RTP BETA T-piece 87° for non-pressure domestic sewage, for socket, PP, d - 40, d1 - 32 [Code number: 36382] Draft RTP BETA T-piece 87° for non-pressure domestic sewage, for socket, PP, d - 40, d1 - 32 [Code number: 36382]
RTP BETA T-piece 87° for non-pressure domestic sewage, for socket, PP, d - 40, d1 - 32 [Code number: 36382]
Details 		36382 225 rub
Photo Draft
Photo RTP BETA T-piece 45° for non-pressure domestic sewage, for socket, PP, d - 40, d1 - 32 [Code number: 36383] Draft RTP BETA T-piece 45° for non-pressure domestic sewage, for socket, PP, d - 40, d1 - 32 [Code number: 36383]
RTP BETA T-piece 45° for non-pressure domestic sewage, for socket, PP, d - 40, d1 - 32 [Code number: 36383]
Details 		36383 225 rub
Photo Draft
Photo RTP BETA T-piece 87° for non-pressure domestic sewage, for socket, PP, d - 32, d1 - 32 [Code number: 36384] Draft RTP BETA T-piece 87° for non-pressure domestic sewage, for socket, PP, d - 32, d1 - 32 [Code number: 36384]
RTP BETA T-piece 87° for non-pressure domestic sewage, for socket, PP, d - 32, d1 - 32 [Code number: 36384]
Details 		36384 101 rub
Photo Draft
Photo Geberit HDPE Bend 90°, reduced, without leg, d56, d1 50 [Code number: 363.873.16.1] Draft Geberit HDPE Bend 90°, reduced, without leg, d56, d1 50 [Code number: 363.873.16.1]
Geberit HDPE Bend 90°, reduced, without leg, d56, d1 50 [Code number: 363.873.16.1]
Details 		363.873.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant
  • Wide radius

Technical data

Material: PE-HD

d d1 X r
mm mm cm cm
56 50 4 4
Photo Draft
Photo RTP BETA Bend 45° for non-pressure domestic sewage, for socket, PP, d - 32 [Code number: 36391] Draft RTP BETA Bend 45° for non-pressure domestic sewage, for socket, PP, d - 32 [Code number: 36391]
RTP BETA Bend 45° for non-pressure domestic sewage, for socket, PP, d - 32 [Code number: 36391]
Details 		36391 46 rub
Photo Draft
Photo RTP BETA Bend 45° for non-pressure domestic sewage, for socket, PP, d - 32 [Code number: 36397] Draft RTP BETA Bend 45° for non-pressure domestic sewage, for socket, PP, d - 32 [Code number: 36397]
RTP BETA Bend 45° for non-pressure domestic sewage, for socket, PP, d - 32 [Code number: 36397]
Details 		36397 50 rub
Photo Draft
Photo RTP BETA Bend 87° for non-pressure domestic sewage, for socket, PP, d - 32 [Code number: 36399] Draft RTP BETA Bend 87° for non-pressure domestic sewage, for socket, PP, d - 32 [Code number: 36399]
RTP BETA Bend 87° for non-pressure domestic sewage, for socket, PP, d - 32 [Code number: 36399]
Details 		36399 46 rub
Photo Draft
Photo RTP BETA Bend 87° for non-pressure domestic sewage, for socket, PP, d - 32 [Code number: 36402] Draft RTP BETA Bend 87° for non-pressure domestic sewage, for socket, PP, d - 32 [Code number: 36402]
RTP BETA Bend 87° for non-pressure domestic sewage, for socket, PP, d - 32 [Code number: 36402]
Details 		36402 50 rub
Photo Draft
Photo RTP BETA Eccentric reducer for non-pressure domestic sewage, for socket, PP, d - 40, d1 - 32 [Code number: 36403] Draft RTP BETA Eccentric reducer for non-pressure domestic sewage, for socket, PP, d - 40, d1 - 32 [Code number: 36403]
RTP BETA Eccentric reducer for non-pressure domestic sewage, for socket, PP, d - 40, d1 - 32 [Code number: 36403]
Details 		36403 48 rub

© Inrusstrade.ru 1999-2024. "Inrusstrade" Ltd. Copying and quoting is prohibited