Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Lenin Hills

Loading

Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Наименование Article Цена
Chemkor Pressure pipelines T-piece, uPVC, SDR 26, 1,0 MPa, with metal flange, d - 110, d1 - 80 [Code number: 2181140]
Details
2181140 11 010 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)
  • For branching pipeline

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn D L L1
mm mm mm mm
110 80 347 170

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Chemkor Pressure pipelines T-piece, uPVC, SDR 26, 1,0 MPa, with metal flange, d - 160, d1 - 100 [Code number: 2181141]
Details
2181141 18 891 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)
  • For branching pipeline

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn D L L1
mm mm mm mm
160 100 452 210

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Chemkor Pressure pipelines T-piece, uPVC, SDR 26, 1,0 MPa, with metal flange, d - 160, d1 - 150 [Code number: 2181142]
Details
2181142 22 677 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)
  • For branching pipeline

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn D L L1
mm mm mm mm
160 150 455 230

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Chemkor Pressure pipelines T-piece, uPVC, SDR 26, 1,0 MPa, with metal flange, d - 225, d1 - 150 [Code number: 2181143]
Details
2181143 32 876 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)
  • For branching pipeline

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn D L L1
mm mm mm mm
225 150 530 272

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Chemkor Pressure pipelines T-piece, uPVC, SDR 26, 1,0 MPa, with metal flange, d - 225, d1 - 200 [Code number: 2181144]
Details
2181144 38 710 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)
  • For branching pipeline

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn D L L1
mm mm mm mm
225 200 580 282

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with uPVC flange, d - 110, d1 - 100 [Code number: 2181145]
Details
2181145 2 186 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM) with PVC flange;
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn D L
mm mm mm
110 100 148,5

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with uPVC flange, d - 160, d1 - 150 [Code number: 2181146]
Details
2181146 3 721 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM) with PVC flange;
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn D L
mm mm mm
160 150 154

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with uPVC flange, d - 225, d1 - 200 [Code number: 2181147]
Details
2181147 10 712 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM) with PVC flange;
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn D L
mm mm mm
225 200 173,5

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with uPVC flange, d - 315, d1 - 300 [Code number: 2181148]
Details
2181148 15 117 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM) with PVC flange;
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn D L
mm mm mm
310 300 215

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with uPVC flange, d - 400, d1 - 400 [Code number: 2181149]
Details
2181149 26 132 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM) with PVC flange;
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn D L
mm mm mm
400 400 247,5

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with metal flange, d - 90, d1 - 80 [Code number: 2181150]
Details
2181150 7 688 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn D L
mm mm mm
90 80 128

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with metal flange, d - 110, d1 - 100 [Code number: 2181151]
Details
2181151 8 615 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn D L
mm mm mm
110 100 135

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with metal flange, d - 160, d1 - 150 [Code number: 2181152]
Details
2181152 13 212 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn D L
mm mm mm
160 150 154

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with metal flange, d - 225, d1 - 200 [Code number: 2181153]
Details
2181153 24 957 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn D L
mm mm mm
225 200 335

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Chemkor Pressure pipelines Flange adapter, uPVC, SDR 26, 1,0 MPa, with metal flange, d - 315, d1 - 300 [Code number: 2181154]
Details
2181154 42 148 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn D L
mm mm mm
315 300 380

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Chemkor Pressure pipelines T-piece, uPVC, SDR 26, 1,0 MPa, с резьбовым выходом, d - 110, d1 - 2" [Code number: 2181162]
Details
2181162 3 788 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)
  • For branching pipeline

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn G L L1
mm   mm mm
110 2" 340 81

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Chemkor Pressure pipelines T-piece, uPVC, SDR 26, 1,0 MPa, с резьбовым выходом, d - 160, d1 - 2" [Code number: 2181163]
Details
2181163 8 017 rub

Purpose of application:

  • For domestic and drinking water supply
  • For residential and industrial buildings, as well as agricultural enterprises
  • For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
  • For vertical internal gutters
  • For pressure sewerage (if it is not possible to divert sewage by gravity)
  • For branching pipeline

Characteristics:

  • High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
  • Resistance to microorganisms, fungi and bacteria;
  • Fast installation;
  • Socket connection (sealing ring made of EPDM);
  • High resistance to alkalis, acids and surfactants;
  • The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
  • The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
  • Refers to the flammability class G1 (GOST 30244-94);
  • Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
  • Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Dn G L L1
mm   mm mm
160 2" 380 103

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Ostendorf KG Bend 15° KGB, d - 110 [Code number: 220200]
Details
220200 307 rub

Application purpose:

  • For outdoor sewerage

Colour: Orange-brown RAL 8023. 

Material: Hard polyvinyl chloride (rigid PVC), without plasticizers and fillers.

DN α z1 z2 l1
mm   mm mm mm
110 15° 9 14 69

Download the installation instructions of product: Ostendorf KG Bend 15°

Ostendorf KG Bend 30° KGB, d - 110 [Code number: 220210]
Details
220210 350 rub

Application purpose:

  • For outdoor sewerage

Colour: Orange-brown RAL 8023. 

Material: Hard polyvinyl chloride (rigid PVC), without plasticizers and fillers.

DN α z1 z2 l1
mm   mm mm mm
110 30° 17 21 86

Download the installation instructions of product: Ostendorf KG Bend 30°

Ostendorf KG Bend 45° KGB, d - 110 [Code number: 220220]
Details
220220 371 rub

Application purpose:

  • For outdoor sewerage

Colour: Orange-brown RAL 8023. 

Material: Hard polyvinyl chloride (rigid PVC), without plasticizers and fillers.

DN α z1 z2 l1
mm   mm mm mm
110 45° 25 29 85

Download the installation instructions of product: Ostendorf KG Bend 45°