Logo
Ru| En

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Name Article Price
Photo Draft
Photo Bend PAM-GLOBAL® S 88˚ with elongated side 250mm Photo Bend PAM-GLOBAL® S 88˚ with elongated side 250mm Draft Bend PAM-GLOBAL® S 88˚ with elongated side 250mm
1 2
Bend PAM-GLOBAL® S 88˚ with elongated side 250mm
Details
Nominal internal diameter X1 X2 K Weight Code number
DN mm mm mm kg  
70* 250 90 160 2,8 155785
80 250 95 160 2,9 179681
100 250 110 100 3,6 155823

 *Diameter 80 gradually replace diameter 70
Photo Draft
Photo WC Special multiple branch PAM-GLOBAL® S, right hand Draft WC Special multiple branch PAM-GLOBAL® S, right hand
WC Special multiple branch PAM-GLOBAL® S, right hand
Details
Nominal internal diameter Range Weight Code number
DN   kg  
100 Right 6,00 155847
Photo Draft
Photo Double branch PAM-GLOBAL® S 68˚ with elongated side Draft Double branch PAM-GLOBAL® S 68˚ with elongated side
Double branch PAM-GLOBAL® S 68˚ with elongated side
Details
Nominal internal diameter L H W b c d p q r Weight Code number
DN                   kg  
100x100x100 280 414 110 130 130 284 244 281 383 6,3 176896

Dimensions are presented in mm
Photo Draft
Photo Bend PAM-GLOBAL® Plus 88˚ with elongated side 250mm Draft Bend PAM-GLOBAL® Plus 88˚ with elongated side 250mm
Bend PAM-GLOBAL® Plus 88˚ with elongated side 250mm
Details
Nominal internal diameter X1 X2 K Weight Code number
DN mm mm mm kg  
100 250 110 140 3,6 155242
Photo Draft
Photo Hutterer & Lechner Cover plate for HL 138 [Code number: HL 0138.2E] (Russia) Draft Hutterer & Lechner Cover plate for HL 138 [Code number: HL 0138.2E] (Russia)
Hutterer & Lechner Cover plate for HL 138 [Code number: HL 0138.2E] (Russia)
Details 		HL 0138.2E 716 rub

Application area:

  • For air condition and ventilation

Characteristics:

  • Material: ABS (PS)

Weight: 0,03 kg
Photo
Photo Hutterer & Lechner Trap seal cartridge for HL520-series [Code number: HL 0520.2E]
Hutterer & Lechner Trap seal cartridge for HL520-series [Code number: HL 0520.2E]
Details 		HL 0520.2E 890 rub

Application area:

  • For shower trays

Characteristics:

  • Material: EPDM

Weight: 0,048 kg

 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
70 120 120 0,05 0,001008000
Photo
Photo Hutterer & Lechner Space saver tubular trap with connector DN40x1 1/2' for double sinks, ball-joint outlet, DN50x1 1/2' [Code number: HL 126.2/50]
Hutterer & Lechner Space saver tubular trap with connector DN40x1 1/2' for double sinks, ball-joint outlet, DN50x1 1/2' [Code number: HL 126.2/50]
Details 		HL 126.2/50 6 169 rub

Space saver tubular trap HL 126.2/50 DN 50 horizontal is made of polypropylene. This device is designed so that it saves a lot of space under a sink, and trap is equipped with ball-joint outlet. Trap with connector DN40 x 1 1/2' for double sinks.

Diameter Material Weight
DN, mm   gr
50 polypropylene 590
Photo Draft
Photo Hutterer & Lechner Concealed trap with removable trap insert, DN50 [Code number: HL 134.0/50] Draft Hutterer & Lechner Concealed trap with removable trap insert, DN50 [Code number: HL 134.0/50]
Hutterer & Lechner Concealed trap with removable trap insert, DN50 [Code number: HL 134.0/50]
Details 		HL 134.0/50 3 211 rub

HL 134.0/50 concealed trap is embedded into the wall. HL 134.0/50 is made of polypropylene, it has diameter of 50 mm and capacity of 0.38 l/s. Trap insert can be removed if necessary.

Diameter Material Capacity Weight
DN, mm   l/s gr
50 polypropylene 0,38 385
Photo Draft
Photo Hutterer & Lechner Elbow and tube, DN40x1 1/2' [Code number: HL 16] Draft Hutterer & Lechner Elbow and tube, DN40x1 1/2' [Code number: HL 16]
Hutterer & Lechner Elbow and tube, DN40x1 1/2' [Code number: HL 16]
Details 		HL 16 1 069 rub

Application area:

  • For bath

Characteristics:

  • Material: PP
  • Size: DN40
  • Includes 6/4" swivel nut
  • Acts as an extension

Weight: 0.080 kg.
Photo Draft
Photo Manifold connectors PAM-GLOBAL® S multi-waste Photo Manifold connectors PAM-GLOBAL® S multi-waste Draft Manifold connectors PAM-GLOBAL® S multi-waste
Manifold connectors PAM-GLOBAL® S multi-waste
Details
Nominal internal diameter L H W a d e Weight Code number
DN mm mm mm mm mm mm kg  
100 204 125 200 43 142 62 3,2 175626
150 265 165 290 70 184 81 6,1 175629
Photo Draft
Photo Double bend PAM-GLOBAL® Plus 88˚ Draft Double bend PAM-GLOBAL® Plus 88˚
Double bend PAM-GLOBAL® Plus 88˚
Details
Nominal internal diameter L H W a b c o Weight Code number
DN mm mm mm mm mm mm mm kg  
50 148 148 58 121 50 100 148 1 179343
75 183 183 83 145 60 120 183 1,5 235801
100 228 228 110 170 70 140 228 2,8 155359
150 303 303 160 219 90 180 303 6,3 155422
Photo Draft
Photo Bend PAM-GLOBAL® S 88˚ (two joint bends 44˚) Draft Bend PAM-GLOBAL® S 88˚ (two joint bends 44˚)
Bend PAM-GLOBAL® S 88˚ (two joint bends 44˚)
Details

According to DIN 1986, part 1, section 6.1.2, the changes of the direction of main pipelines and sewers may be fulfilled only with using prefabricated pipe bend, and each individual bend can have a maximum angle of 45˚. In some cases, for these purposes can be used two pipe bends 45˚. Due to the double knee one connecting element is saved and the installation becomes easier. In addition, this fitting provides a good opportunity to place the fastening element in its middle. The bend is also intended for use as a transition from the riser to a horizontal pipe, and vice versa.

Nominal internal diameter X1 X2 X3 Weight Code number
DN mm mm mm kg  
50 50 100 121 1,0 155754
70* 60 120 145 1,4 155783
80 60 120 145 1,5 176707
100 70 140 170 3,1 155819
125 80 160 195 4,2 155872
150 90 180 219 7,0 155905

*Diameter 80 gradually replace diameter 70
Photo Draft
Photo Single long arm branch PAM-GLOBAL® S Draft Single long arm branch PAM-GLOBAL® S
Single long arm branch PAM-GLOBAL® S
Details
Nominal internal diameter L H W a b c p Weight Code number
DN               kg  
100x100 282 450 110 450 282 70 340 6 156726

Dimensions are presented in mm
Photo Draft
Photo Double branch PAM-GLOBAL® S 88˚ with elongated side Draft Double branch PAM-GLOBAL® S 88˚ with elongated side
Double branch PAM-GLOBAL® S 88˚ with elongated side
Details
Nominal internal diameter L H W b c d p q r Weight Code number
DN                   kg  
100x100x100 243 405 110 110 120 295 222 244 354 5,9 176883

Dimensions are presented in mm
Photo Draft
Photo REHAU RAUPIANO PLUS lock to cap, d - 110 [Code number: 11230001001 / 123 000 001] Draft REHAU RAUPIANO PLUS lock to cap, d - 110 [Code number: 11230001001 / 123 000 001]
REHAU RAUPIANO PLUS lock to cap, d - 110 [Code number: 11230001001 / 123 000 001]
Details 		11230001001 1 332 rub

Rehau RAUPIANO PLUS lock to cap is used when installing sound absorbing sewerage system RAUPIANO PLUS for fast and durable fixation of pipe cap. It is made of strip steel.

For pipe caps with diameter of 110 mm.

Dy Weight
mm kg/pc
110 0,226
Photo Draft
Photo Hutterer & Lechner Lip seal for HL 136N [Code number: HL 01088D] Draft Hutterer & Lechner Lip seal for HL 136N [Code number: HL 01088D]
Hutterer & Lechner Lip seal for HL 136N [Code number: HL 01088D]
Details 		HL 01088D 890 rub

Characteristics of HL sewage equipment:

  • Complies with ISO 9001
  • Safety for ecology and health
  • Products undergo laboratory testing
  • Durability
  • Attractive appearance
Suitable for Weight
  kg/pc
HL 136N 0,001
Photo
Photo Hutterer & Lechner Waste gasket for HL520 [Code number: HL 01100D]
Hutterer & Lechner Waste gasket for HL520 [Code number: HL 01100D]
Details 		HL 01100D 275 rub
Photo Draft
Photo Hutterer & Lechner 90° angled brass-connector, chrome plated, DN32 [Code number: HL 134.1C] Draft Hutterer & Lechner 90° angled brass-connector, chrome plated, DN32 [Code number: HL 134.1C]
Hutterer & Lechner 90° angled brass-connector, chrome plated, DN32 [Code number: HL 134.1C]
Details 		HL 134.1C 7 471 rub

HL 134.1C 90° angled brass-connector is intended for HL 134 and HL 134.0. Angled brass-connector is made of brass, it is chrome plated, diameter 32 x 5/4". Height of the dip tube can be controlled. It also has a threaded connection 5/4.

Diameter Material Weight
DN, mm   gr
32 х 5/4" brass
chrome plated		 290
Photo Draft
Photo Hutterer & Lechner Non-return valve, 1' [Code number: HL 3] Draft Hutterer & Lechner Non-return valve, 1' [Code number: HL 3]
Hutterer & Lechner Non-return valve, 1' [Code number: HL 3]
Details 		HL 3 1 844 rub

HL 3 - it is non-return valve 1' with hose connector 3/4'. Valve is made of polypropylene. Weight HL 3 is small - it is only 60 g.

Diameter Material Weight
inlet outlet   gr
1" 3/4" polypropylene 60
Photo Draft
Photo Hutterer & Lechner Visual parts solid brass (price on request) [Code number: HL 555N.2] Draft Hutterer & Lechner Visual parts solid brass (price on request) [Code number: HL 555N.2]
Hutterer & Lechner Visual parts solid brass (price on request) [Code number: HL 555N.2]
Details 		HL 555N.2

Application purposes:

  • For waste and overflow assembly

Characteristics:

  • brass

Material: Edelmessing

Weight: 0,305 kg

© Inrusstrade.ru 1999-2024. "Inrusstrade" Ltd. Copying and quoting is prohibited