Logo
Ru| En

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Name Article Price
Photo Draft
Photo PAM-GLOBAL® Plus Corner branch 45° Photo PAM-GLOBAL® Plus Corner branch 45° Draft PAM-GLOBAL® Plus Corner branch 45°
PAM-GLOBAL® Plus Corner branch 45°
Details
Nominal internal diameter L H W b c d p q r Weight Code number
DN                   kg  
100x100 227 260 227 190 190 70 242 166 46 5,2 155387

Dimensions are presented in mm
Photo Draft
Photo Anti syphonic trap PAM-GLOBAL® S with bottom access door Draft Anti syphonic trap PAM-GLOBAL® S with bottom access door
Anti syphonic trap PAM-GLOBAL® S with bottom access door
Details
Nominal internal diameter L H W c d Weight Code number
DN mm mm mm mm mm kg  
50 165 255 58 80 187 2,5 229107
Photo Draft
Photo PAM-GLOBAL® Plus T-shaped connector for pipes Draft PAM-GLOBAL® Plus T-shaped connector for pipes
PAM-GLOBAL® Plus T-shaped connector for pipes
Details
Nominal internal diameter X1 X2 K1 K2 Weight Code number
DN mm mm mm mm kg  
50 x 50 x 50 200 160 125 85 2,5 155214
Photo Draft
Photo Hutterer & Lechner Tubular trap with ball-joint outlet, DN50x1 1/2' [Code number: HL 100G/50] Draft Hutterer & Lechner Tubular trap with ball-joint outlet, DN50x1 1/2' [Code number: HL 100G/50]
Hutterer & Lechner Tubular trap with ball-joint outlet, DN50x1 1/2' [Code number: HL 100G/50]
Details 		HL 100G/50 1 713 rub

Tubular trap HL 100G/50 DN50 horizontal is equipped with a ball-joint outlet. The device is made of polypropylene and has weight of 225 g. There is threaded connection 6/4". Height of the nozzle can adjust if necessary.

Diameter Material Weight
DN, mm   gr
50 polypropylene 225

Download data sheet: HL 100G/50 Tubular trap HL 100G/50
Photo Draft
Photo Hutterer & Lechner Wash-basin trap with appliance hose connector and rosette, DN40x1 1/4' [Code number: HL 132.1/40] Draft Hutterer & Lechner Wash-basin trap with appliance hose connector and rosette, DN40x1 1/4' [Code number: HL 132.1/40]
Hutterer & Lechner Wash-basin trap with appliance hose connector and rosette, DN40x1 1/4' [Code number: HL 132.1/40]
Details 		HL 132.1/40 2 671 rub

HL 132.1/40 wash-basin trap DN40 x 1 1/4' horizontal is connected to a wash basin. It is made of polypropylene and has a weight is 225 grams. The wash-basin trap can connect to a dishwasher or washing machine, height of the dip tube is adjusted. HL 132.1/40 is equipped with a decorative rosette, which allows it fits easily into the interior.

Diameter Material Weight
DN, mm   gr
40 polypropylene 225
Photo Draft
Photo Hutterer & Lechner Waste and overflow assembly with ball-joint tub-trap 1 1/2' incl. hose connector 8-13mm [Code number: HL 555N] Draft Hutterer & Lechner Waste and overflow assembly with ball-joint tub-trap 1 1/2' incl. hose connector 8-13mm [Code number: HL 555N]
Hutterer & Lechner Waste and overflow assembly with ball-joint tub-trap 1 1/2' incl. hose connector 8-13mm [Code number: HL 555N]
Details 		HL 555N 12 025 rub

Application area:

  • For bath

Characteristics:

  • Material: PP (visible parts are chrome plated)
  • Size: DN40/50
  • There is an overflow
  • Drain hole diameter is 60mm
  • Exhaust type: swivel (allows it to rotate 280° horizontally as well as 10° vertically)
  • There is a fitting that allows you to connect a drainage tube (size from 8 to 13 mm)
  • Equipped with double seal for release
  • Includes Bowden cable - CrNi 18/10 steel used for manufacturing

Capacity: 0.67 l/s.

Mounting at a height of 107 mm.

Product weight: 0,897 kg.
Photo Draft
Photo WC-Pipe PAM-GLOBAL® S Draft WC-Pipe PAM-GLOBAL® S
WC-Pipe PAM-GLOBAL® S
Details
Nominal internal diameter L K Weight Code number
DN mm mm kg  
100 225 170 2,9 155845
Photo Draft
Photo Anti syphonic trap PAM-GLOBAL® S with bottom access door (large diameter) Draft Anti syphonic trap PAM-GLOBAL® S with bottom access door (large diameter)
Anti syphonic trap PAM-GLOBAL® S with bottom access door (large diameter)
Details

Weight

Nominal internal diameter L H W b c Code number
DN mm mm mm mm mm kg  
100 316 382 110 316 359 9,2 179013
150 412 531 160 412 470 24,8 156916
Photo Draft
Photo PAM-GLOBAL® Plus Corner branch 68° Photo PAM-GLOBAL® Plus Corner branch 68° Draft PAM-GLOBAL® Plus Corner branch 68°
PAM-GLOBAL® Plus Corner branch 68°
Details
Nominal internal diameter L H W b c d p q r Weight Code number
DN                   kg  
75x75 158 180 158 110 110 70 149 72 36 2,1 155346
100x100 195 220 195 130 130 90 189 87 50 3,5 155386

Dimensions are presented in mm
Photo Draft
Photo Single branch PAM-GLOBAL® S 45˚ with elongated side Draft Single branch PAM-GLOBAL® S 45˚ with elongated side
Single branch PAM-GLOBAL® S 45˚ with elongated side
Details
Nominal internal diameter L H W b c d e p q r Weight Code number
DN                     kg  
100x100 238 430 110 205 205 225 170 424 346 241 5,3 156723
150x150 323 705 110 265 265 440 350 684 571 403 18,3 156938

Dimensions are presented in mm
Photo Draft
Photo Biplanar pipe-cross PAM-GLOBAL® S 88˚ with elongated side (angle of entry 45˚, angle of thrust 45˚) Draft Biplanar pipe-cross PAM-GLOBAL® S 88˚ with elongated side (angle of entry 45˚, angle of thrust 45˚)
Biplanar pipe-cross PAM-GLOBAL® S 88˚ with elongated side (angle of entry 45˚, angle of thrust 45˚)
Details
Nominal internal diameter X1 X2 X3 L K Weight Code number
DN           kg  
100x100x100 325 115 105 430 210 5,2 155862

Dimensions are presented in mm
Photo Draft
Photo WC-Branche 45° PAM-GLOBAL® S Draft WC-Branche 45° PAM-GLOBAL® S
WC-Branche 45° PAM-GLOBAL® S
Details
Nominal internal diameter Range Weight Code number
DN   kg  
100 Left 5,8 155850
100 Right 5,8 155849
Photo Draft
Photo Bend PAM-GLOBAL® S 68˚ Draft Bend PAM-GLOBAL® S 68˚
Bend PAM-GLOBAL® S 68˚
Details
Nominal internal diameter X Weight Code number
DN mm kg  
50 65 0,7 155750
70* 75 1,0 155779
80 80 1,1 176705
100 90 1,8 155814
125 105 2,9 155868
150 120 4,1 155901
200 145 7,1 156968

 *Diameter 80 gradually replace diameter 70
Photo Draft
Photo Long tail single branch 45˚ PAM-GLOBAL® Plus Draft Long tail single branch 45˚ PAM-GLOBAL® Plus
Long tail single branch 45˚ PAM-GLOBAL® Plus
Details
Nominal internal diameter L H W b c d e p q r Weight Code number
DN                     kg  
100x100 238 430 110 205 205 225 170 424 346 221 5,3 155381
150x150 323 705 110 265 265 440 350 684 571 403 18,3 155443
200x200 423 770 110 340 346 430 320 749 600 383 26 155471

Dimensions are presented in mm
Photo Draft
Photo Bend PAM-GLOBAL® Plus 68˚ Draft Bend PAM-GLOBAL® Plus 68˚
Bend PAM-GLOBAL® Plus 68˚
Details
Nominal internal diameter X Weight Code number
DN mm kg  
50 65 0,72 155200
80 80 1,05 176736
100 90 1,75 155235
125 105 2,90 155260
150 120 4,10 155276
200 145 7,10 155452
Photo Draft
Photo Hutterer & Lechner Space saver tubular trap with appliance hose connector and ball-joint outlet, DN40x1 1/2' [Code number: HL 126/40] Draft Hutterer & Lechner Space saver tubular trap with appliance hose connector and ball-joint outlet, DN40x1 1/2' [Code number: HL 126/40]
Hutterer & Lechner Space saver tubular trap with appliance hose connector and ball-joint outlet, DN40x1 1/2' [Code number: HL 126/40]
Details 		HL 126/40 3 817 rub

HL 126/40 - space saver tubular trap DN40 horizontal made of polypropylene. The device weighs 385 grams. The tubular trap is designed so that you can save space under sink. HL 126/40 is equipped with a ball-joint outlet, and it can connect to a dishwasher or washing machine. The device is equipped with a threaded connection 6/4".

Diameter Material Weight
DN, mm   gr
40 polypropylene 385
Photo Draft
Photo Hutterer & Lechner Wash-basin trap with appliance hose connector, cleaning eye, swivelling outlet and rosette, DN32x1 1/4' [Code number: HL 133/30] Draft Hutterer & Lechner Wash-basin trap with appliance hose connector, cleaning eye, swivelling outlet and rosette, DN32x1 1/4' [Code number: HL 133/30]
Hutterer & Lechner Wash-basin trap with appliance hose connector, cleaning eye, swivelling outlet and rosette, DN32x1 1/4' [Code number: HL 133/30]
Details 		HL 133/30 2 490 rub

HL 133/30 wash-basin trap DN32x1 1/4' horizontal is connected to a wash basin and it has appliance hose connector 3/4'. The wash-basin trap can connect to a dishwasher or washing machine. HL 133/30 is equipped with a decorative rosette, non-return valve, cleaning eye/tray and swivelling outlet.

Diameter Material Weight
DN, mm   gr
32 polypropylene 220
Photo Draft
Photo Hutterer & Lechner Waste and overflow assembly 1 1/2' with ball-joint tub-trap DN40/50, L= 80 cm [Code number: HL 555N.L.0] Draft Hutterer & Lechner Waste and overflow assembly 1 1/2' with ball-joint tub-trap DN40/50, L= 80 cm [Code number: HL 555N.L.0]
Hutterer & Lechner Waste and overflow assembly 1 1/2' with ball-joint tub-trap DN40/50, L= 80 cm [Code number: HL 555N.L.0]
Details 		HL 555N.L.0 12 830 rub

Application area:

  • For bath

Characteristics:

  • Material: PP
  • Size: DN40/50
  • Exhaust type: swivel (allows it to rotate 280° horizontally as well as 10° vertically)
  • There is a fitting that allows you to connect a drainage tube (size from 8 to 13 mm)
  • There is a Bowden cable (length is 80 cm) - CrNi 18/10 steel is used for manufacturing

Capacity: 0.67 l/s

Product weight: 0.643 kg
Photo Draft
Photo Bend PAM-GLOBAL® Plus 88˚ Draft Bend PAM-GLOBAL® Plus 88˚
Bend PAM-GLOBAL® Plus 88˚
Details
Nominal internal diameter X Weight Code number
DN mm kg  
50 75 0,72 155199
80 95 1,3 176737
100 110 2,0 155234
125 125 3,2 155259
150 145 4,1 155275
200 180 7,8 155451
250 223 13,5 155479
300 280 27,7 155496
400 466 59 on order
Photo Draft
Photo Bend PAM-GLOBAL® S 88˚ Draft Bend PAM-GLOBAL® S 88˚
Bend PAM-GLOBAL® S 88˚
Details
Nominal internal diameter X Weight Code number
DN mm kg  
50 75 0,7 155749
70* 90 1,2 155778
80 95 1,4 176706
100 110 2,1 155813
125 125 3,2 155867
150 145 4,1 155900
200 180 7,8 155930
250 223 13,5 157065
300 280 27,7 157130
400 466 59 245567

 *Diameter 80 gradually replace diameter 70

© Inrusstrade.ru 1999-2024. "Inrusstrade" Ltd. Copying and quoting is prohibited